排序方式: 共有93条查询结果,搜索用时 15 毫秒
71.
In this paper, reusing Al alloy chips via novel recycling process of powder thixoforging (PTF) is presented. PTF is a direct machining chips conversion method with partial melting into high quality final products with improved mechanical properties compared to parent alloy. 520.0 Al alloy powders from milling chips were produced via mechanical alloying (MA). The PTF product exhibited remarkable combination of mechanical properties of 168 HV hardness, compression yield strength (CYS) of 515 MPa, ultimate compression strength (UCS) of 1121MPa, and substantial fracture plastic strain of 45 %. Additionally, the PTF product showed relative weight reduction of 55.7 %. As a consequence, the microstructure refinement and modification during PTF have significant effects on dramatic improvement of mechanical properties, leading to considerable combination of superior strength and ductility. 相似文献
72.
On Residual Stresses in Resistance Spot-Welded Aluminum Alloy 6061-T6: Experimental and Numerical Analysis 总被引:1,自引:0,他引:1
D. Afshari M. Sedighi M. R. Karimi Z. Barsoum 《Journal of Materials Engineering and Performance》2013,22(12):3612-3619
In this study, an electro-thermal-structural-coupled finite element (FE) model and x-ray diffraction residual stress measurements have been utilized to analyze distribution of residual stresses in an aluminum alloy 6061-T6 resistance spot-welded joint with 2-mm-thickness sheet. Increasing the aluminum sheet thickness to more than 1 mm leads to creating difficulty in spot-welding process and increases the complexity of the FE model. The electrical and thermal contact conductances, as mandatory factors are applied in contact areas of electrode-workpiece and workpiece-workpiece to resolve the complexity of the FE model. The physical and mechanical properties of the material are defined as thermal dependent to improve the accuracy of the model. Furthermore, the electrodes are removed after the holding cycle using the birth-and-death elements method. The results have a good agreement with experimental data obtained from x-ray diffraction residual stress measurements. However, the highest internal tensile residual stress occurs in the center of the nugget zone and decreases toward nugget edge; surface residual stress increases toward the edge of the welding zone and afterward, the area decreases slightly. 相似文献
73.
M. Sedighi M. Rasti 《The International Journal of Advanced Manufacturing Technology》2008,38(9-10):958-964
Mass production of CNG pressure vessels requires an accurate understanding of process effective parameters. In this paper, the finite-element method has been used to study the vessel manufacturing parameters. The FE model has been verified by experimental results. The entire manufacturing process, including deep drawing, redrawing and ironing, of an aluminum liner sample of CNG pressure vessels (without spinning) have been simulated. The deep drawing process has been modeled by using three types of dies: flat, conical and tractrix; then drawing force and wall thickness variations have been compared. In order to achieve the final diameter of the liner, the redrawing process has been implemented in a conical die. To obtain a uniform wall thickness, the ironing process has been simulated in two stages, and the required force and die angle for each process have been extracted. The result of this work presents an integrated perspective for decision-making on the manufacturing of CNG liners. 相似文献
74.
Farid Sedighi 《Construction Management & Economics》2013,31(11):941-950
In many countries, ageing populations, skills shortages and increasing inter-sector labour competition has made graduate recruitment and retention a priority in the construction industry. Understanding what constitutes an employer-of-choice in the eyes of graduates is important in meeting this challenge. A survey of 160 undergraduates across 26 international universities concluded that the top three most important workplace characteristics for university students on construction courses are: positive work relationships, being able to learn on the job, and a workplace that is passionate about work. Distinct gender differences were exposed between preferences as were differences in preferences compared to the preferences of graduates in other industries. These findings contribute to our understanding of how students make choices about employers, what factors are important in making those decisions and how these factors vary between different graduate groups. They also contribute to our understanding of how to design better recruitment strategies to attract talent to the construction sector in an environment where demand is anticipated to exceed supply for some time ahead. 相似文献
75.
Ehsan Fattahi Mousa Farhadi Kurosh Sedighi 《International Journal of Thermal Sciences》2010,49(12):2353-2362
In this article, the natural convection flow in eccentric annulus is simulated numerically by Lattice Boltzmann Model (LBM) based on double-population approach. A numerical strategy presents for dealing with curved boundaries of second order accuracy for both velocity and temperature fields. The effect of vertical, horizontal, and diagonal eccentricity at various locations is examined at Ra = 104 and σ = 2. Velocity and temperature distributions as well as Nusselt number are obtained. The results show that the average Nusselt number increases when the inner cylinder moves downward regardless of the radial position. The validation with previous studies shows that double-population approach can evaluate the velocity and temperature fields in curved boundaries with a good accuracy. 相似文献
76.
Mohammad Hossein Sedighi Gilani Iman Sarrafi Maghsoud Abbaspour 《Ad hoc Networks》2013,11(4):1297-1304
IEEE 802.15.4 as a standard for low rate wireless personal area networks (LR-WPAN) is an applicative choice for implementation of wireless sensor networks. Due to the advantages of this standard and its capabilities for more specification to wireless sensor networks, we were persuaded to resolve some of its proven weaknesses in such environments. The slotted CSMA/CA method utilized in beacon-enabled mode of 802.15.4 causes unacceptable level of energy consumption and throughput in conditions like high loads. To overcome these issues, we proposed an adaptable CSMA/TDMA hybrid channel access method by applying some modifications to the 802.15.4 standard. The energy and throughput improvement is achieved by dedicating a part of the contention access period to a time division medium access protocol (TDMA). To evaluate our proposed method in comparison with 802.15.4, we developed a simulation in OMNeT++. Analysis of the simulation results indicates general improvement of energy consumption and throughput. As a sensor network grows more populated or the load increases, the proposed method shows a better performance in comparison with IEEE 802.15.4 standard. 相似文献
77.
Mohsen Nouri Mehdi Sedighi Mostafa Ghasemi Majid Mohammadi 《Korean Journal of Chemical Engineering》2013,30(9):1700-1709
Response surface method was used to study the effect of aromatic extraction of heavy feedstock in thermal cracking. N-methylpyrrolidone as the solvent performing dearomatization of feedstock was at different temperature and molar solvent to oil ratios. Temperature, flow rate and steam-to-hydrocarbon ratio were in the range of 1,053–1,143 K, 1–2 g/g, and 0.75–1.2 g/min, respectively. From the CCD studies, the effects of flow rate and coil outlet temperature were the key factors influencing the yield of light olefins. Ethylene and propylene yields increased more than 10% by dearomatization. C 5 + decreased by 13% on average. Finally, we obtained the single maximum yield of ethylene, propylene, and simultaneous maximum yields for untreated and raffinate. 相似文献
78.
Mehdi Sedighi Kamyar Keyvanloo Jafar Towfighi 《Korean Journal of Chemical Engineering》2010,27(4):1170-1176
Response surface methodology coupled with central composite design (CCD) was used to investigate the effects of operating variables, namely, coil outlet temperature (COT), flow rate and steam ratio, on the yield of light olefins (ethylene and propylene) in thermal cracking of heavy liquid hydrocarbon. From the CCD studies the effects of COT and flow rate were concluded to be the key factors influencing the yield of light olefins. Based on this experimental design, two empirical models, representing the dependence of ethylene and propylene yields on operating conditions, were developed. The single maximum response of ethylene and propylene yields and simultaneous maximization of both responses have also been obtained at the corresponding optimal independent variables. The results of the multi-response optimization could be used to find the suitable operating conditions. 相似文献
79.
H. Nemati M. FarhadiK. Sedighi E. FattahiA.A.R. Darzi 《International Communications in Heat and Mass Transfer》2010
Lattice Boltzmann Method is applied to investigate the mixed convection flows utilizing nanofluids in a lid-driven cavity. The fluid in the cavity is a water-based nanofluid containing Cu, Cuo or Al2O3 nanoparticles. The effects of Reynolds number and solid volume fraction for different nanofluids on hydrodynamic and thermal characteristics are investigated. The effective thermal conductivity and viscosity of nanofluid are calculated by Chon and Brinkman models, respectively. The results indicate that the effects of solid volume fraction grow stronger sequentially for Al2O3, Cuo and Cu. In addition the increases of Reynolds number leads to decrease the solid concentration effect. 相似文献
80.
Samaneh Sedighi Maragheh Massoud Dousti Mehdi Dolatshahi Behbod Ghalamkari 《International Journal of Circuit Theory and Applications》2019,47(4):561-571
This paper presents a dual-mode tunable bandpass filter (BPF) for global system for mobile communication, universal mobile telecommunications system, wireless fidelity, and worldwide interoperability for microwave access standard applications. The proposed filter consists of a stepped-impedance resonator, single resonator, and coupled line, which are loaded with varactors. The center frequency and bandwidth of the proposed filter can be tuned with tuning varactors. Furthermore, the measurement results show that the BPF can be tuned over the frequency range of 1.8 to 2.5 GHz. Moreover, the bandwidth can be changed at each certain frequency. Furthermore, using PIN diodes, a bandstop filter is added to the tunable BPF to reduce the out-of-band frequencies around the desired frequencies. The values of LC equivalent circuits are calculated, and the results are compared with those obtained from the layout of the proposed structure. Finally, the measurement results justify the simulation results. 相似文献