Dynamic resource allocation in OFDM systems: an overview of cross-layer optimization principles and techniques

Recently, a lot of research effort has been spent on cross-layer system design. It has been shown that cross-layer mechanisms (i.e., policies) potentially provide significant performance gains for various systems. In this article we review several aspects of cross-layer system optimization regarding wireless OFDM systems. We discuss basic optimization models and present selected heuristic approaches realizing cross-layer policies by means of dynamic resource allocation. Two specific areas are treated separately: models and dynamic approaches for single transmitter/receiver pairs (i.e., a point-to-point communication scenario) as well as models and approaches for point-to-multipoint communication scenarios (e.g., the downlink of a wireless cell). This article provides basic knowledge in order to investigate future OFDM cross-layer-optimization issues     

Finding the dominant source of distortion in two-stage op-amps

Although non-linear distortion is an important specification for op-amps, it is only determined at the end of the design in classical design flows, leaving the designers without a clue about its origin. Recently, the Best Linear Approximation (BLA) has been introduced to approximate non-linear systems. It allows to describe the behaviour of a non-linear system as a linear Frequency Response Function combined with a coloured noise source to describe respectively the wanted linear response and the distortion. To determine the dominant source of non-linear distortion, we combine the BLA with a classical noise analysis in this paper. The paper explains the BLA-based noise analysis and shows the result of this simulation-based analysis when applied to various op-amp architectures. The analysis pinpoints the non-linear hot-spots in an efficient way, without the use of special simulations, manual analytical calculations or modified transistor models.     

Instantiability of RSA-OAEP Under Chosen-Plaintext Attack

We show that the widely deployed RSA-OAEP encryption scheme of Bellare and Rogaway (Eurocrypt 1994), which combines RSA with two rounds of an underlying Feistel network whose hash ( i.e., round) functions are modeled as random oracles, meets indistinguishability under chosen-plaintext attack (IND-CPA) in the standard model based on simple, non-interactive, and non-interdependent assumptions on RSA and the hash functions. To prove this, we first give a result on a more general notion called “padding-based” encryption, saying that such a scheme is IND-CPA if (1) its underlying padding transform satisfies a “fooling" condition against small-range distinguishers on a class of high-entropy input distributions, and (2) its trapdoor permutation is sufficiently lossy as defined by Peikert and Waters (STOC 2008). We then show that the first round of OAEP satisfies condition (1) if its hash function is t-wise independent for t roughly proportional to the allowed message length. We clarify that this result requires the hash function to be keyed, and for its key to be included in the public key of RSA-OAEP. We also show that RSA satisfies condition (2) under the \(\Phi \)-Hiding Assumption of Cachin et al. (Eurocrypt 1999). This is the first positive result about the instantiability of RSA-OAEP. In particular, it increases confidence that chosen-plaintext attacks are unlikely to be found against the scheme. In contrast, RSA-OAEP’s predecessor in PKCS #1 v1.5 was shown to be vulnerable to such attacks by Coron et al. (Eurocrypt 2000).     

Cryptocurrency value formation: An empirical study leading to a cost of production model for valuing bitcoin

This paper aims to identify the likely determinants for cryptocurrency value formation, including for that of bitcoin. Due to Bitcoin’s growing popular appeal and merchant acceptance, it has become increasingly important to try to understand the factors that influence its value formation. Presently, the value of all bitcoins in existence represent approximately $7 billion, and more than $60 million of notional value changes hands each day. Having grown rapidly over the past few years, there is now a developing but vibrant marketplace for bitcoin, and a recognition of digital currencies as an emerging asset class. Not only is there a listed and over-the-counter market for bitcoin and other digital currencies, but also an emergent derivatives market. As such, the ability to value bitcoin and related cryptocurrencies is becoming critical to its establishment as a legitimate financial asset.Using cross-sectional empirical data examining 66 of the most widely used cryptocurrencies, a regression model was estimated that points to three main drivers of cryptocurrency value: the level of competition in the network of producers, the rate of unit production, and the difficulty of algorithm used to “mine” for the cryptocurrency. These amount to relative differences in the cost of production of one digital currency over another at the margin, pointing to differences in relative cost of production – electricity goes in, cryptocurrency comes out. Using that as a starting point, a no-arbitrage situation is established for Bitcoin-like cryptocurrencies followed by the formalization of a cost of production model to determine the fair value of a bitcoin.     

Fast and Compact 16 by 16 Cellular Neural Network Implementation

The paper presents a Cellular Neural Network implementation based on a high gain sigmoid operation. The required simplifications to the original theory are described that allow the use of high gain. With this design black and white images can be processed. The basic building blocks in a cell are described. A 16×16 cells network has been designed and processed with 1.2 micron CMOS technology. Measurement results which show the operation of the network are presented.     

群创挤入iSuppli 前十大ODM行列

2006年，香港冠捷科技有限公司（TPV）年收入实现72亿美元，成功晋级前十强。2007年，群创光电年收入超过30亿美元，成为ODM精英分子。此外，尽管受季节性因素影响，前十大ODM厂商2007年第二季度收入普遍下滑，但群创当期收入保持增长（参见图1）。继冠捷和群刨将其商业模式转为主攻品牌产品之后，它们分别取代了明基和宏达电在iSuppli ODM排名中的地位。[第一段]     

针对10Gbps线卡应用的灵活性接口方案

引言 许多网络应用都采用10Gbps接口来减小通信瓶径。例如,用户对低成本千兆以太网(GbE)接入和VPLS需求的不断高涨,推动着运营商投入巨大力量建设10GbE城域网。这些网络是对已经向10Gbps SDH(STM-64)和DWDM(密集波分复用)发展的现有传输网络的补充。另外,这些网络所传输的内容一般缘于一个大的数据中心,而这些数据中心都是考虑用通过10Gbps光纤通道接口连接到光通道交换机,进而和服务器联系在一起,并依次连接交换机和存储子系统。 每个应用都有各自的性能和密度要求。过去光接口是直接在线卡上实现的,今天在某些高性能应用中仍采用这种方式。然     

Application of the hybrid Hopkins–Abbe method in full-chip OPC

The hybrid Hopkins–Abbe method is presented and shown to resolve the problem of the traditional Hopkins theory, namely the requirement for constant mask diffraction efficiencies. Simulation of electromagnetic scattering from the mask that takes into account the oblique angles of incidence from the illumination is performed by application of the domain decomposition method that is extended for offaxis illumination. Examples of 45 nm and 32 nm lines and spaces through pitch and through focus are presented to demonstrate the validity and accuracy of the hybrid Hopkins–Abbe method. The results obtained are in excellent agreement with a rigorous and independent (third party) simulator.     

Combinatorial auctions for exchanging resources over a grid network

In grid systems, users compete for different types of resources such that they may execute their applications. Traditional grid systems are formed of organisations that join together for the purpose of collaborative projects. Resources of each of the participating organisation are pooled such that members of individual organisations may access the shared infrastructure. In general, each participant is both a provider and a consumer of resources. Whilst such systems address large organisations, in this paper we address democratic grid systems to satisfy needs of small organisations and even individuals, where on-demand grids may be formed by drawing idling resources available on the Internet. Whilst traditional grid systems resort to allocations that satisfy system specific objectives such as maximization of the resource utilisation, market mechanisms try to obtain allocations that are efficient economically. Economic mechanisms permit to achieve equilibrium between supply and demand and furthermore provide incentives for providers. Combinatorial auction has been argued as an effective mechanism to address the problem of resource allocation within grid systems. Auctions within which multiple types of resources in varying quantities may be traded eliminate the exposure problem by addressing co-allocation. In this paper, we describe a combinatorial exchange where multiple providers and multiple consumers may participate. We describe the winner determination problem that incorporates the time dimension, i.e. resource bundles may be requested for different time ranges, and describe a set of heuristics that have been designed to be fast. We show that these achieve a high level of efficiency as compared to exact solutions. The second part focusses on the pricing problem. The objective is to compute prices that represent the state of the market and bring trustworthy feedback to participants. Drawing on the approach taken by Kwasnica et al. (Manage Sci 51(3):419–434, 2005), we propose a pricing model that computes per-item pricing. Per-item pricing allows users to deduce the price of bundles that they require by linear summation. Furthermore, we propose a model that computes prices as a function of time, thus permitting users, in particular consumers to adjust their demand trading off price and time of execution.     

Nanotechnology‐Enabled Closed Loop Insulin Delivery Device: In Vitro and In Vivo Evaluation of Glucose‐Regulated Insulin Release for Diabetes Control

Recently, a new multifunctional, bio‐inorganic nanocomposite membrane with the ability to self‐regulate the release of insulin in response to blood glucose (BG) levels was reported. Herein, the application of this material as part of a small, implantable, closed‐loop insulin delivery device designed to continuously monitor BG concentrations and regulate insulin release is proposed. The insulin delivery device consists of a nanocomposite glucose‐responsive plug covalently bound to an insulin reservoir made of surface‐modified silicone. The plug is prepared with crosslinked bovine serum albumin (BSA) and enzymes (glucose oxidase (GOx) and catalase (CAT)), pH‐responsive hydrogel nanoparticles, and multifunctional MnO₂ nanoparticles. The plug functions both as a glucose sensor and controlled delivery unit to release higher rates of insulin from the reservoir in response to hyperglycemic BG levels and basal insulin rates at normal BG concentration. The surfaces of the device are modified by silanization followed by PEGylation to ensure its safety and biocompatibility and the stability of encased insulin. Our results show that insulin release can be modulated in vitro in response to glucose concentrations. In vivo experiments show that the glycemia of diabetic rats can be controlled with implantation of the prototype device. The glucose‐responsiveness of the device is also demonstrated by rapid drop in BG level after challenging diabetic rats with bolus injection of glucose solution. In addition, it is demonstrated that surface PEGylation of the device is necessary for reducing the immune response of the host to the implanted foreign object and maintaining insulin stability and bioactivity. With this molecular architecture and the bio‐inorganic nanocomposite plug, the device has the ability to maintain normal BG levels in diabetic rats.