BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

An economic and environment friendly process was adapted to synthesize new dielectric composite materials. Using ethylene vinyl acetate (EVA)/vinyl ester of versatic acid (VeoVa) terpolymer as an aqueous emulsion provides a homogenous dispersion of BaTiO₃ (BT) particles, due to the high viscosity and polarity of the vinyl resin (VR). Composites films were obtained from these dispersions by water evaporation. The evolution of the dielectric properties as a function of the BaTiO₃ content, was correctly fitted by a Maxwell‐Garnett model. This fitting of the experimental curve shows a good dispersion of filler in the vinyl resin and the particles separation by a layer of resin as expected for the preparation method used in this study. The VR/BT composites show good synergy between the dielectric properties of the different phases of the composites due to the formation of macrodipoles and to the strong interactions between polar EVA/VeoVa groups and the BaTiO₃ particles surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44333.     

Reinforcement of maleated polyethylene/ground tire rubber thermoplastic elastomers using talc and wood flour

Maleated polyethylene (MAPE)/Ground tire rubber (GTR) thermoplastic elastomer with 50 vol % GTR was reinforced by incorporation of talc powder and wood flour. Scanning electron microscopy (SEM) reveals that maleated polyethylene (MAPE) has good compatibility with wood flour, but the adhesion with talc particles is weak. Tensile moduli of MAPE/GTR increase more significantly after inclusion of talc particles compared to wood flour. Prediction of the tensile modulus of hybrid MAPE/GTR/particle composites is successfully performed using a combination of Kerner and Halpin‐Tsai models. Elastic moduli are shown to depend strongly on both aspect ratio and level of particle dispersion in the matrix. Measurement of compression sets shows that elastic recovery of the compounds decreases after addition of solid particles. Samples having better particles/matrix compatibility show higher elastic recovery. Thermogravimetric analysis shows that inclusion of wood flour decreases thermal stability of compounds. Density and hardness of MAPE/GTR are also shown to increase after inclusion of particulate reinforcements. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40195.     

Tribological behavior of composites fabricated by reactive SPS sintering in Ti-Si-C system

In this study, wear and friction behavior of two based-composites from the Ti-Si-C system, (40 wt% TiC; 28 wt% Ti₅Si₃; 17 wt% Ti₃SiC₂) and (18 wt% TiC; 26 wt% Ti₅Si₃; 41 wt% Ti₃SiC₂) reinforced by 15 wt% of large size SiC (100-150 µm) particles were investigated. The four-phase composites exhibited approximatively the same friction coefficient (µ ~ 0.9) under high loads (10 N and 7 N). The composite with high Ti₃SiC₂ showed higher wear rate values by one order of magnitude. However, under 1 N, the composite with high TiC content showed a higher running-in period and a lower steady state µ value (0.37 after 1000 m sliding distance). Scanning electron microscopy, Energy Dispersive X-Ray and Raman spectroscopy analysis of the worn surfaces of the two composites revealed that oxidation was the dominant wear mechanism. The oxidation process and the removal kinetics of the oxides during sliding controlled the tribological behavior of the composites. The influence of processing variables on microstructures development and wear mechanisms of the composites is discussed.     

1,5-Disubstituted Acylated 2-Amino-4,5-dihydroimidazoles as a New Class of Retinoic Acid Receptor–Related Orphan Receptor (ROR) Inhibitors

A growing body of evidence suggests a pathogenic role for pro-inflammatory T helper 17 cells (Th17) in several autoimmune diseases, including multiple sclerosis, rheumatoid arthritis, inflammatory bowel disease, type I diabetes, and psoriasis—diseases for which no curative treatment is currently available. The nuclear retinoic acid receptor–related orphan receptors alpha and gamma (RORα/γ), in particular the truncated isoform RORγt that is specifically expressed in the thymus, play a critical role in the activation of a pro-inflammatory Th17 response, and RORγ inverse agonists have shown promise as negative regulators of Th17 for the treatment of autoimmune diseases. Our study underscores the screening of a large combinatorial library of 1,5-disubstituted acylated 2-amino-4,5-dihydroimidazoles using a demonstrated synthetic and screening approach and the utility of the positional scanning libraries strategy for the rapid identification of a novel class of ROR inhibitors. We identified compound 1295-273 with the highest activity against RORγ (3.3 µM IC₅₀) in this series, and almost a two-fold selectivity towards this receptor isoform, with 5.3 and 5.8 µM IC₅₀ against RORα and RORβ cells, respectively.     

Update on optimized purification and characterization of natural milk allergens

Highly purified allergens namely cow's milk alpha-lactalbumin (ALA). (Bos d 4), beta-lactoglobulin (BLG) (Bos d 5) and casein (Bos d 8) and goat's milk casein were prepared from the raw milk from a single animal with a known genetic background. Consequently the natural isoforms are limited, constant and characterized. Purification included selective precipitations and chromatographical steps. Characterization of structure and allergenic activity assessment of milk allergens were carried out using physicochemical and immunochemical methods. Taken together data demonstrated the absence of impurities and of contamination by other milk allergens in each preparation. NMR and circular dichroism analyses confirmed the native conformation and proper folding of ALA and BLG and the expected absence of folding of bovine and caprine casein. Enzyme immuno assays confirmed the native conformation of BLG and the purity and immunoreactivity of all the proteins. The allergenic activity, e. g. the IgE binding capacity, of purified proteins was identical as that of those proteins when present in milk. The purified proteins also demonstrated the ability to provoke the degranulation of humanized rat basophilic leukaemia cells. All the data thus confirm the purity, identity, structural conformation and functionality of the prepared milk allergens.     

Antioxidant properties of various solvent extracts of potato peel,sugar beet pulp and sesame cake

BACKGROUND: Growing interest in the replacement of synthetic food antioxidants by natural ones has fostered research on vegetable sources and screening of raw materials to identify new antioxidants. The food‐processing industry generates substantial quantities of phenolic‐rich by‐products that could be valuable natural sources of antioxidants. In this study the antioxidant properties and total phenolic, flavonoid and flavonol contents of three industrial by‐products, sugar beet pulp, sesame cake and potato peel, extracted with various solvents were examined. Since different antioxidant compounds have different mechanisms of action, several methods were used to assess the antioxidant efficacy of extracts. RESULTS: Among the six solvents tested, methanol gave the highest extract yield of potato peel and sugar beet pulp, while diethyl ether gave the highest extract yield of sesame cake. Methanol exhibited the highest extraction ability for phenolic compounds, with total phenolics amounting to 2.91, 1.79 and 0.81 mg gallic acid equivalent g^?1 dry weight in potato peel, sugar beet pulp and sesame cake extracts respectively, and also showed the strongest antioxidant capacity in the three assays used. All three methods proved that potato peel extract had the highest antioxidant activity owing to its high content of phenolic compounds and flavonoids. CONCLUSION: On the basis of the results obtained, potato peel, sugar beet pulp and sesame cake extracts could serve as natural antioxidants owing to their significant antioxidant activity. Therefore they could be used as preservative ingredients in the food and/or pharmaceutical industries. Copyright © 2009 Society of Chemical Industry     

Palmitic Acid-Lauric Acid/Expanded Graphite as Form-Stable Composite Phase Change Material for Low-Temperature Energy Storage Applications

Low thermal conductivity of binary fatty acid mixture of palmitic and lauric acids(PA-LA) within the value range of 0.15-0.17 W/(m·K) restricts its wide utilization as thermal energy storage material in the active regime of solar heating applications at low operating temperatures. Nevertheless, this mixture as phase change material(PCM) has a suitable phase-change temperature and heat of 36 ℃ and 176.3 J/g, respectively. Hence, the objective of this study is to formulate a novel form-stable comp...     

Effects of processing on oxidative stability of sesame oil extracted from intact and dehulled seeds

Oxidative stability of oils extracted from intact and dehulled sesame seeds was determined by monitoring changes in fatty acid composition, iodine value (IV), peroxide value (PV), conjugated diene (CD), para-anisidine value (p-AV), and 2-thiobarbituric acid (TBA) value and by nuclear magnetic resonance spectroscopy after storage under Schaal oven conditions at 65°C for up to 35 d. The oils from coated seeds were more stable, as reflected in PV, CD, p-AV and TBA values, than those extracted from dehulled seeds after roasting at 200°C, steaming at 100°C, roasting at 200°C plus steaming, or microwaving at 2450 MHz, except for TBA values of oil from microwaved seeds. After 35 d of storage at 65°C, the CD, p-AV, and TBA values of extracted oil from dehulled microwaved seeds were 17.72, 10.20, and 1.22, respectively, while those of their coated counterparts were significantly (P<0.05) different at 14.20, 16.47, and 1.26, respectively. Few significant changes were evident in the fatty acid composition of oil obtained from either coated and dehulled seeds subjected to different treatments. Nuclear magnetic resonance analyses found that R_ao (aliphatic to olefinic protons) and R_ad (aliphatic to diallylmethylene protons) ratios increased steadily over the entire storage period, which indicated progressive oxidation of unsaturated fatty acids.     

Impact compaction on a subgrade layer overlying deep deposit

Recent expansions of urban communities around the world have forced geotechnical engineers to deal with weak deep deposit for the construction of highways and roads. The current practice in estimating the level of field compaction is based on the results of a laboratory test, known as ‘Proctor’, where wide discrepancies are found between the laboratory-predicted and the field measurements. Impact compaction is a widespread soil-improvement technique that has been used with proven effectiveness. The technique is environmentally friendly, simple to apply and relatively inexpensive. This study presents a numerical model, which was developed to simulate the case of a dry thin subgrade layer overlying a deep deposit and subjected to impact compaction. The model is capable of measuring the total energy applied to the surface of the subgrade layer and its two components; namely the portion dissipated into the lower deposit and the portion remaining in the subgrade layer causing its compaction. A design guideline is presented.     

A bipolar implementation of the Beta neuron

The great flexibility of the Beta function and its universal approximation characteristics, make Beta basis function neural networks (BBFNNs) very useful. We present a hardware implementation of the Beta neuron. The proposed circuit was designed by using a standard bipolar technology. PSPICE simulations show the good concordance of the output of our circuit with the analytic Beta function. We also successfully integrated the electronic Beta neuron in the design of a BBFNN that approximates a nonlinear mapping.