A Phenylacetamide Resveratrol Derivative Exerts Inhibitory Effects on Breast Cancer Cell Growth

Resveratrol (RSV) is a natural compound that displays several pharmacological properties, including anti-cancer actions. However, its clinical application is limited because of its low solubility and bioavailability. Here, the antiproliferative and anti-inflammatory activity of a series of phenylacetamide RSV derivatives has been evaluated in several cancer cell lines. These derivatives contain a monosubstituted aromatic ring that could mimic the RSV phenolic nucleus and a longer flexible chain that could confer a better stability and bioavailability than RSV. Using MTT assay, we demonstrated that most derivatives exerted antiproliferative effects in almost all of the cancer cell lines tested. Among them, derivative 2, that showed greater bioavailability than RSV, was the most active, particularly against estrogen receptor positive (ER+) MCF7 and estrogen receptor negative (ER-) MDA-MB231 breast cancer cell lines. Moreover, we demonstrated that these derivatives, particularly derivative 2, were able to inhibit NO and ROS synthesis and PGE2 secretion in lipopolysaccharide (LPS)-activated U937 human monocytic cells (derived from a histiocytoma). In order to define the molecular mechanisms underlying the antiproliferative effects of derivative 2, we found that it determined cell cycle arrest at the G1 phase, modified the expression of cell cycle regulatory proteins, and ultimately triggered apoptotic cell death in both breast cancer cell lines. Taken together, these results highlight the studied RSV derivatives, particularly derivative 2, as promising tools for the development of new and more bioavailable derivatives useful in the treatment of breast cancer.     

Optimization of the spark plasma sintering processing parameters affecting the properties of polyimide

The present study deals with the optimization of polyimide (PI) mechanical properties, obtained by Spark Plasma Sintering (SPS), by using a method combining Design of Experiments (DOE) with physical, structural, and mechanical characterizations. The effects of SPS parameters such as temperature, pressure, dwell time, and cooling rate on the density, mechanical properties, and structure of PI were investigated. The experimental results revealed that the mechanical properties of the material were optimized by raising the sintering temperature up to 350°C. The optimized SPS processing parameters were a temperature of 350°C, a pressure of 40 MPa, and a dwell time of 5 min. Under these conditions, a relative density of 99.6% was reached within only a few minutes. The corresponding mechanical properties consisted of Young's modulus of 3.43 GPa, a Shore D hardness of 87.3, and a compressive strength of 738 MPa for a maximum compressive strain of 61.8%. Moreover, when working at 320°C and at 100 MPa, an increase in the dwell time was necessary to enhance the properties. Contrary to the other parameters, the cooling rate appeared to be a non‐significant parameter. Finally, correlations between the PI structure and the mechanical properties were made to demonstrate the densification mechanisms. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41542.     

A yeast surface display platform for plant hormone receptors: Toward directed evolution of new biosensors

Small-molecule biosensors have major applications in biotechnology and medicine but remain difficult to engineer. Plant hormone receptors represent an attractive platform for engineering such biosensors because their chemically induced dimerization architectures naturally decouple small-molecule sensing and sensor actuation. Rapid biosensor engineering will require quantitative high-throughput screening methods. Here we develop a yeast surface display (YSD) platform for the PYR1/HAB1 abscisic acid sensor of Arabidopsis thaliana. We extensively optimized PYR1 surface display, HAB1 purification, and binding reaction conditions. Our system reproduces previous results with wild-type and engineered receptors, and a mathematical analysis of the PYR1/HAB1 system allows us to infer all binding constants. Critically, we find that a previously engineered PYR1 receptor with altered ligand specificity binds HAB1 with identical affinity, suggesting that substantial reengineering of the PYR1 binding pocket does not compromise sensor actuation. This YSD platform for A. thaliana PYR1/HAB1 will facilitate future biosensor engineering efforts.     

R Curves and Crack-Stability Map: Application to Ce-TZP/Al2O3

The concept of a crack-stability map is developed by considering the interaction between the crack-driving force and the rising crack-growth resistance of a toughened ceramic. The map plots normalized transition crack length as function of the ratio of the crack-initiation fracture toughness and the plateau toughness to delineate regimes of stable and unstable crack growth. The plot is used to analyze R curves and fracture stresses of a transformation-toughened Ce-TZP/Al₂O₃. It is shown that the fracture stress and the small scatter measured for this ceramic are consistent with its R- curve behavior, which enables stable growth of surface cracks from flaws (pores and second-phase particles), leading to a flaw-insensitive ceramic.     

High-Toughness Silicon Carbide as Armor

Silicon carbide, with single-edge precracked beam (SEPB) toughness greater than 7 MPa·m^1/2, was made by hot-pressing using Al–B–C (ABC) or Al–Y₂O₃ (YAG) as additives. The hardness of SiC processed with a liquid phase was always less than SiC densified without a liquid phase despite having a similar or finer grain size. With increasing Al content, the ABC system changed from trans- to intergranular fracture with a drop in hardness and a two- to threefold increase in SEPB toughness. Strength and Weibull modulus for materials processed with a liquid phase were higher than those of solid-state densified SiC. Ballistic testing, however, did not show any improvement over SiC densified with B and C additives. Depth of penetration was controlled by hardness of the SiC-based materials, while V ₅₀ values for 14.5 mm WC–Co cored projectiles were in the range of 720–750 m/s for all materials tested.     

Simulating Coxian phase-type distributions for patient survival

Coxian phase-type distributions are a special type of Markov model that can be used to represent survival times in terms of phases through which an individual may progress until they eventually leave the system completely. Previous research has considered the Coxian phase-type distribution to be ideal in representing patient survival in hospital. However, problems exist in fitting the distributions. This paper investigates the problems that arise with the fitting process by simulating various Coxian phase-type models for the representation of patient survival and examining the estimated parameter values and eigenvalues obtained. The results indicate that numerical methods previously used for fitting the model parameters do not always converge. An alternative technique is therefore considered. All methods are influenced by the choice of initial parameter values. The investigation uses a data set of 1439 elderly patients and models their survival time, the length of time they spend in a UK hospital.     

Materials for double patterning strategies: Development and application

Double patterning has become the most promising approach to overcome the 32 nm node challenges. Several schemes have been proposed to simplify the process, each requiring very specific materials that still have to be developed and optimized. The resist platform presented here is an image lock material which has been developed to meet the Litho-Litho-Etch (or 2P1E) approach. In this paper, we present the material development of dedicated polymers for the double imaging technique. The lithographic properties of these materials are evaluated, in term of process window (PW) and Line Edge Roughness (LER). Successful patterning of 50 and 45 nm lines at 90 nm pitch has been obtained.     

Geodesign application for bio-swale design: rule-based approach stormwater management for Ottawa Street North in Hamilton,Ontario

With increases in storm frequency and intensity, municipalities are finding new ways of managing stormwater. Solutions require collaboration across planning disciplines and input from an informed public. This study compares a system of bioswales to existing curb and gutter infrastructure in a post-industrial streetscape of Hamilton, Ontario. Using the geodesign process, a section of Ottawa St. North was modelled to show how green infrastructure can ease the burden on aging, combined sewer systems. Qualitative data was gathered from residents of the neighbourhood through field notes, and quantitative geospatial data through GIS. Parametric modelling was used to generate a design, and scenarios created to show resulting impacts on stormwater run-off. The model was posted online as an interactive presentation, accessible to all stakeholders for review and comment. The results of the study demonstrate powerful new tools that can assist landscape architects in designing, collaborating and communicating stormwater strategies.     

Intestinal apolipoprotein B secretion is inhibited by the flavonoid quercetin: Potential role of microsomal triglyceride transfer protein and diacylglycerol acyltransferase

Recent studies have yielded evidence that plant flavonoids reduce hepatic lipid and apolipoprotein B (apoB) secretion. However, the possible role of flavonoids in regulating lipid and apoB secretion by the intestine has not been studied. The purpose of our study was to examine the effects of quercetin, a common dietary flavonoid, on TAG and apoB secretion in a human intestinal cell-line, CaCo-2. Differentiated postconfluent CaCo-2 cells grown on filters and pretreated with quercetin for 8 h were shown by ELISA to inhibit basolateral apoB secretion in a dose-dependent manner. At 15 μM, the secretion of both apoB-100 and apoB-48 were inhibited similarly. This effect was shown to be specific, as quercetin did not affect the incorporation of [³⁵S]methionine/cysteine into secreted TCA-precipitable proteins. To determine the mechanism underlying this inhibitory effect, we examined two regulatory points: IAG availability and lipid transfer to the lipoprotein particle. Quercetin inhibited TAG synthesis under both basal and lipid-rich conditions, indicating that lipid availability is a determining factor in the regulation of apoB secretion by quercetin. The reduction was due at least in part to a decrease in diacylglycerol acyltransferase activity. We next examined lipid transfer or lipidation of the lipoprotein particle by analyzing microsomal IAG transfer protein (MTP) activity. Quercetin decreased MTP activity moderately. In summary, the data demonstrated that pharmacological concentrations of quercetin are a potent inhibitor of intestinal apoB secretion and that reduced lipid availability and lipidation in the lipoprotein assembly step are the mechanism for the suppression of apoB-containing lipoprotein secretion by quercetin in CaCo-2 cells.