Organic geochemistry characterisation of crude oils from Mishrif reservoir rocks in the southern Mesopotamian Basin,South Iraq: Implication for source input and paleoenvironmental conditions

Seven crude oils from Cretaceous Mishrif reservoir rocks in the southern Mesopotamian Basin, South Iraq were studied to describe oil characteristics, providing information on the source of organic matter input and the genetic link between oils and their potential source rock in the basin. This study is based on biomarker and non-biomarker analyses performed on oil samples. The analysed oils are aromatic intermediate oils as indicated by high aromatic hydrocarbon fractions with more that 50%. These oils are also characterized by high sulfur and trace metal (Ni, V) contents and relatively low API gravity values (19.0–27.2° API). The results of this study indicate that these oils were derived from a marine carbonate source rocks bearing Type II-S kerogen that were deposited under sulphate-reducing conditions. This is primary achieved from their biomarkers and bulk carbon isotope and inorganic element contents (i.e., S, Ni and V). The absence of 18a (H)-oleanane biomarker also suggests a source age older than Late Cretaceous. The biomarker characteristics of these oils are consistent with those of the Late Jurassic to Early Cretaceous source rocks in the basin. However, biomarker maturity data also indicate that the oils were generated from early maturity source rocks. This appears to result from the type of kerogen of the source rock, characterized by a high-S kerogen (Type II-S).     

Vipulanandan model for the rheological properties with ultimate shear stress of oil well cement modified with nanoclay

In this study, the effect of clay nanoparticles (NC) and temperature on the rheological properties with ultimate shear stress and weight loss of the oil well cement (class H) modified with NC was investigated. The NC content was varied between 0 and 1% by the weight of the cement. The total weight loss at 800 °C for the oil well cement decreased from 6.10% to 1.03%, a 83% reduction when the cement was mixed with 1% of NC. The results also showed that 1% of NC increased the rheological properties of the cement slurry. The NC modification increased the yield stress (τ_o) and plastic viscosity (PV) by 5%–65% and 3%–16% respectively based on the NC content and the temperature of the cement slurry. The shear thinning behavior of the cement slurry with and without NC has been quantified using the Vipulanandan rheological model and compared with the Herschel-Bulkley model. The Vipulanandan rheological model has a maximum shear stress limit were as the Herschel-Bulkley model did not have a limit on the maximum shear stress. Based on the Vipulanandan rheological model the maximum shear stress produced by the 0% and 1% of NC at the temperature of 25 °C were 102 Pa and 117 Pa respectively hence an increase of 15% in the ultimate shear stress due to the addition of NC. The addition of 1% of NC increased the compressive strength of the cement by 12% and 43% after 1 day and 28 days of curing respectively. The modulus of elasticity of the cement increased with the additional of 1% NC by 6% and 76% after 1 day and 28 days of curing respectively. Effects of NC content and the temperature on the model parameters have been quantified using a nonlinear model (NLM). The NLM quantified the effect of NC treatment on all the model parameters.     

Treatment and restoration of used Mineral-Oil-Based hydraulic fluids from different machines. Part 1: Dewatering,filtration and effect of viscosity modifier

In this work, characterization and treatment of used hydraulic oil samples were performed in three steps. In the first step, the physical and the chemical properties of fresh and used hydraulic mineral oil samples from various centrifugal casting and pipe drawing machines were investigated according to ASTM D 6158. Results show that water content, solid particles count and depletion of additives have considerably affected most of the oil properties. Used oil samples failed in the appearance, thermal stability, oxidation stability, foaming tendency, water content and particles count.

In the second step, a simple methodology for dewatering and filtration was adopted. This methodology involved settling, followed by dry-air bubbling for oil dehydration and finally vacuum filtration. Such process successfully removed considerable portion of solid particles and water in used oil samples. Appearance, pour point, water content, particles count, and acid number were restored to the allowable limits. While water separability, oxidation stability, thermal stability and foaming tendency still failed the limits after treatment. It is obvious that additives will be needed to restore the latter properties.

In the third step, viscosity modifier additive was added to the oil samples to enhance viscous properties. A linear increase in kinematic viscosity was witnessed at 100°C, while at 40°C, an initial linear increase at low viscosities was followed by lower slopes at higher viscosities.     

Azeotrope formation in gasoline–ethanol blends. Part 1 – Impact of nonionic on E10 distillation curve

Blending 10?vol% of ethanol into hydrocarbon base gasoline (HBG) increases significantly the vapour pressure of the blend (E10), and exhibits near-azeotrope behaviour that severely affects the shape of E10 distillation curve. The distillation curves of HBG and E10 fuel blend, were constructed using ASTM D86 distillation data, and the areas under each distillation curve, were calculated through the numerical trapezoid rule (NTR) and calculus definite integration (CDI) methods. Consequently, the area due to azeotrope formation (ADAF), was estimated. In this paper, we present the impact of small concentration of nonionic surfactant on the area under distillation curve (AUDC) of E10 fuel blend and the area due to azeotrope formation (ADAF). Also, the influences of the added surfactant on the volatility criteria of the investigated E10 fuel blend were discussed.     

New mechanisms in photo-assisted MOVPE of II-VI semiconductors

The first detailed comparison has been made of the metalorganic vapor phase epitaxy growth rates of CdTe, ZnTe, and ZnSe, measured in situ with laser reflectometry. The comparison also includes the photo-assisted growth with visible radiation from an argon ion laser. Using a standard Group II precursor (DMCd or DMZn.TEN) partial pressure of 1.5 × 10⁻⁴ atm, VI/II ratio of 1 and DIPM (M = Te, Se) the maximum growth rates are in the region of 10 to 15 AU/ s. Decrease in growth rates of ZnTe at higher temperatures or higher laser powers have been attributed to the desorption from the substrate of unreacted Te precursor. The behavior of DTBSe is quite different from DIPSe for both pyrolytic and photo-assisted growth. The maximum growth rate is around 1 AU/ s with very little photo-enhancement, except at 300°C. Secondary ion mass spectroscopy analysis of hydrogen concentration in the ZnSe layers shows high concentrations, up to 5.9 × 10¹⁹ atoms cm⁻³ for DTBSe grown ZnSe under pyrolytic conditions. These results show that the growth kinetics play an important part in the incorporation of hydrogen and passivation of acceptor doped material.     

Compilation Methods for the Address Calculation Units of Embedded Processor Systems

An essential component of today's embedded system is an instruction-set processor running real-time software. All variations of these core components contain at least the minimum data-flow processing capabilities, while a certain class contain specialized units for highly data-intensive operations for Digital Signal Processing (DSP). For the required level of memory interaction, the parallel executing Address Calculation Unit (ACU) is often used to tune the architecture to the memory access characteristics of the application. The design of the ACU is performance critical. In today's typical design flow, this design task is somewhat driven by intuition as the transformation from application algorithm to architecture is complex and the exploration space is immense. Automatic utilities to aid the designer are essential; however, the key compilation techniques which map high-level language constructs onto addressing units have lagged far behind the emergence of these units. This paper presents a new retargetable approach and prototype tool for the analysis of array references and traversals for efficient use of ACUs. In addition to being an enhancement to existing compiler systems, the ArrSyn utility may be used as an aid to architecture exploration. A simple specification of the addressing resources and basic operations drives the available transformations and allows the designer to quickly evaluate the effects on speed and code size of his/her algorithm. Thus, the designer can tune the design of the ACU toward the application constraints. ArrSyn has been successfully used together with a C compiler developed for a VLIW architecture for an MPEG audio decoding application. The combination of these methods with the C compiler showed on average a 39% speedup and 29% code size reduction for a representative set of DSP benchmarks.     

Subharmonic synchronous and hybrid mode-locking of a monolithic DBR laser operating at millimeter-wave frequencies

A detailed comparison of subharmonic synchronous and subharmonic hybrid mode-locking of a monolithic distributed Bragg reflector (DBR) laser operating at 33 GHz is presented. Optical injection at the 20th subharmonic frequency (1.65 GHz) has produced a locking range of 10 MHz with negligible amplitude modulation. In comparison, electrical injection at the 4th subharmonic frequency (5.83 GHz) has shown higher levels of amplitude modulation and a narrower locking range (4 MHz). While subharmonic hybrid mode-locking remains a simple and cost effective solution for the generation of low timing jitter high-repetition rate optical pulse trains, subharmonic synchronous mode-locking shows superior performance with regard to reduced amplitude modulation and larger locking range.     

Joint QoE-based user association and efficient cell–carrier distribution for enabling fully hybrid spectrum sharing approach in 5G mmWave cellular networks

Densifying the network by adding more minicell towers or relays throughout a hot spot area while extensively reusing the available spectrum is an essential choice to improve QoS. Unfortunately, this approach can be prohibitively costly. One possible solution to reduce the capital and operating expenditure in such overdensified networks is the adoption of the spectrum-sharing approach. However, both approaches would complicate the interference phenomenon either among inter- or intraoperators, which may cause serious performance degradation. In this paper, a fully hybrid spectrum-sharing (FHSS) approach aided by an efficient cell–carrier distribution was proposed with consideration to the interference dilemma. Moreover, an adaptive hybrid QoE-based mmWave user association (mUA) scheme was presented to assign a typical user to the serving mmWave base station (mBS), which offers the highest achievable data rate. The proposed FHSS approach (with the presented QoE-based mUA) was compared with recent works and with both FHSS approach using the conventional max-SINR-based mUA, which assigns a typical user to the tagged mBS carrying the highest signal-to-interference-plus noise ratio and the baseline scenario (licensed spectrum access). In particular, three spectrum access methods (licensed, semipooled, and fully pooled) were integrated in a hybrid manner to engage improved data rates to users. Numerical results show that the joint cell–carrier distribution and FHSS approach with QoE-based mUA outperform both baselines FHSS with the max-SINR mUA scheme and the licensed spectrum access. Furthermore, results demonstrate the effectiveness of the proposed approach in terms of both operators’ independence and fairness.

     

On the capacity of the state‐dependent interference relay channel

This paper considers the state‐dependent interference relay channel (SIRC) in which one of the two users may operate as a secondary user and the relay has a noncausal access to the signals from both users. For discrete memoryless SIRC, we first establish the achievable rate region by carefully merging Han‐Kobayashi rate splitting encoding technique, superposition encoding, and Gelfand‐Pinsker encoding technique. Then, based on the achievable rate region that we derive, the capacity of the SIRC is established in many different scenarios including (a) the weak interference regime, (b) the strong interference regime, and (c) the very strong interference regime. This means that our capacity results contain all available known results in the literature. Next, the achievable rate region and the associated capacity results are also evaluated in the case of additive Gaussian noise. Additionally, many numerical examples are investigated to show the value of our theoretical derivations.