Effects of urban coarse particles inhalation on oxidative and inflammatory parameters in the mouse lung and colon

Background

Air pollution is a recognized aggravating factor for pulmonary diseases and has notably deleterious effects on asthma, bronchitis and pneumonia. Recent studies suggest that air pollution may also cause adverse effects in the gastrointestinal tract. Accumulating experimental evidence shows that immune responses in the pulmonary and intestinal mucosae are closely interrelated, and that gut-lung crosstalk controls pathophysiological processes such as responses to cigarette smoke and influenza virus infection. Our first aim was to collect urban coarse particulate matter (PM) and to characterize them for elemental content, gastric bioaccessibility, and oxidative potential; our second aim was to determine the short-term effects of urban coarse PM inhalation on pulmonary and colonic mucosae in mice, and to test the hypothesis that the well-known antioxidant N-acetyl-L-cysteine (NAC) reverses the effects of PM inhalation.

Results

The collected PM had classical features of urban particles and possessed oxidative potential partly attributable to their metal fraction. Bioaccessibility study confirmed the high solubility of some metals at the gastric level. Male mice were exposed to urban coarse PM in a ventilated inhalation chamber for 15 days at a concentration relevant to episodic elevation peak of air pollution. Coarse PM inhalation induced systemic oxidative stress, recruited immune cells to the lung, and increased cytokine levels in the lung and colon. Concomitant oral administration of NAC reversed all the observed effects relative to the inhalation of coarse PM.

Conclusions

Coarse PM-induced low-grade inflammation in the lung and colon is mediated by oxidative stress and deserves more investigation as potentiating factor for inflammatory diseases.

     

Tuning the interlaminar shear strength and thermo-mechanical properties of glass fiber composites by incorporation of (3-mercaptopropyl) trimethoxysilane-functionalized carbon black

The incorporation of functionalized nanoscale fillers into traditional glass fiber/unsaturated polyester (GF/UPE) composites provides a more robust mechanical attributes. The current study demonstrates the potential of 3-mercaptopropyl trimethoxysilane (MPTS)-functionalized carbon black (f-CB) for enhancing the thermo-mechanical properties of GF composites. The composites infused with 1, 3 and 5 wt% of pristine and MPTS-functionalized CB were fabricated by hand lay-up and hot press processing. Tensile testing, interlaminar shear strength (ILSS) testing and dynamic mechanical analysis were used to evaluate the performance of nanocomposites. Fourier transform infrared spectroscopy validated the MPTS functionalization of CB. Pristine CB-loaded nanocomposites exhibited marginal improvement in ultimate tensile strength (UTS), ILSS and thermo-mechanical properties. However, with the addition of f-CB, the improvement in all the studied properties was more substantial. The inclusion of 5 wt% f-CB increased the elastic modulus and UTS by 16 and 22%, respectively, whereas the ILSS was enhanced by 36%, in comparison to the neat GF composite. The scanning electron microscope analysis of fractured ILSS samples revealed better fiber-matrix adhesion and compatibility in f-CB-loaded nanocomposites. At the same filler weight percentage, the storage modulus at 25 °C was ~ 19% higher than that of neat composite. The f-CB inclusion resulted in increment of T _g by ~ 13 °C over the T _g of neat GF/UPE composite (~ 109 °C). These improvements were due to the chemical connection of f-CB to the UPE matrix and GF surface. With such improvements in thermal and mechanical properties, these nanocomposites can replace the conventional GF composites with prominent improvements in performance.     

Anticandidal activity of cobalt containing sunflower oil‐based polymer

Bioactive metal cobalt containing sunflower oil‐based polyesteramide resin was developed by condensation polymerization reaction among oil‐derived sunflower fatty amide diol, adipic acid, and cobalt chloride. Microwave‐assisted synthesis was used throughout the reaction as it enhances reaction rate, gives higher yield, and greater purity of the products. Spectroscopic techniques, such as Fourier transform infrared spectroscopy and proton‐nuclear magnetic resonance, have been used to establish the structure of the polymers. Presence of cobalt in polymer has been confirmed through atomic absorption spectroscopy. Standard laboratory methods such as acid value, hydroxyl value, saponification value, iodine value, specific gravity, and viscosity were used to study the physicochemical characteristics of the polymers. Thermal behavior of the polymer was analyzed using thermogravimetry/differential thermal analysis. The synthesized polymers were evaluated for their biological activity. This study indicates that the synthesized polymer has significant antifungal activity against Candida, including azole‐resistant strains, advocating further investigation for clinical applications in the treatment of fungal infections. POLYM. ENG. SCI., 53:2650–2658, 2013. © 2013 Society of Plastics Engineers     

Modelling the properties of pigment‐dyed polyester/cotton sheeting fabrics by response surface methodology

The aim of this study was to model the effect of pigment, binder and fixer concentrations on the rubbing fastness, crease recovery, tear strength and stiffness of pigment‐dyed polyester/cotton sheeting fabrics. The design and analysis of experiments were carried out using Minitab^® statistical software according to the central composite design of response surface methodology. It was found that an increase in the binder concentration significantly improves the dry rubbing fastness, crease recovery and stiffness of the fabric, with a corresponding decrease in fabric tear strength, without significantly affecting the wet rubbing fastness. An increase in the fixer concentration significantly improves both the dry and wet rubbing fastness and crease recovery, with a decrease in fabric tear strength and stiffness. The effect of binder and fixer concentrations on crease recovery was not linear and there was significant negative interaction between these factors for dry rubbing fastness. The effect of pigment concentration was not found to be statistically significant for the types and range of concentrations of pigment, binder and fixer used in this study.     

Combining molecular imprinted nanoparticles with surface plasmon resonance nanosensor for chloramphenicol detection in honey

The focus of this article is to develop a surface plasmon resonance (SPR) nanosensor to determine chloramphenicol (CAP) using the molecularly imprinted nanoparticles. The CAP imprinted nanoparticles were prepared by miniemulsion polymerization method. Then, the nanoparticles were attached onto the SPR nanosensor surface via temperature‐controlled evaporation. Surface characterization studies were performed with atomic force microscopy and contact angle measurements. Kinetic studies were performed with CAP solutions in the concentration range of 0.155–6.192 nM. Florphenicol (FLP) and thiamphenicol (TAP) having similar chemical structures to the template (i.e., CAP) were chosen as competitors to determine selectivity of the nanoparticles. Selectivity constants were observed as 8.86 for CAP/TAP and 8.36 for CAP/FLP. The detection limit was calculated as 40 ng/kg honey sample. In the light of these results, it was emphasized that the SPR nanosensor is able to recognize CAP selectively and has a potential for real‐time CAP detection in honey sample. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Antibody purification by concanavalin A affinity chromatography

Concanavalin A (Con A) immobilized poly(2‐hydroxyethyl methacrylate) (PHEMA) beads in a spherical form (100–150 μm in diameter) were used for the affinity chromatography purification of human immunoglobulin G (IgG) from aqueous solutions and human plasma. PHEMA adsorbents were prepared by suspension polymerization. Bioligand Con A was then immobilized by covalent binding onto PHEMA beads. The maximum IgG adsorption on the PHEMA/Con A beads was observed at pH 6.0. The nonspecific IgG adsorption onto the plain PHEMA adsorbents was very low (ca. 0.17 mg/g). Higher adsorption values (up to 54.3 mg/g) were obtained when the PHEMA/Con A beads were used from aqueous solutions. A higher adsorption capacity was observed for human plasma (up to 69.4 mg/g) with a purity of 82.5%. The adsorption capacities of other blood proteins were 2.0 mg/g for fibrinogen and 4.2 mg/g for albumin. The total protein adsorption was determined to be 76.0 mg/g. IgG molecules could be repeatedly adsorbed and desorbed with the PHEMA/Con A beads without noticeable loss in the IgG adsorption capacity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1202–1208, 2005     

The combustion behavior of epoxy-based multifunctional electrolytes

Multifunctional or structural electrolytes are characterized by ionic conductivity high enough to be used in the electrochemical devices and mechanical performance suitable for the structural applications. Preliminary insights are provided into the combustion behavior of structural bi-continuous electrolytes based on bisphenol A diglycidyl ether (DGEBA), synthesized using the techniques of reaction induced phase separation and emulsion templating. The effect of the composition of the structural electrolytes and external heat flux on the behavior of the formulations were studied using a cone calorimeter with gases formed during testing analyzed using FTIR. The composition of the formulations investigated was changed by varying the type and amount of the ion conductive part of the bi-continuous electrolyte. Two ionic liquids, 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide (EMIM-TFSI) and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF₄), as well as a deep eutectic solvent (DES) based on ethylene glycol and choline chloride, were used. The results obtained confirm that time to ignition, heat release rate (HRR), total mass loss, as well as the composition of the gases released during tests depend on the composition of the formulations. Addition of liquid electrolyte is found to reduce the time to ignition by up to 10% and the burning time by between 28% and 60% with the added benefit of reducing the HRR by at least 34%. Gaseous products such as CO₂, CO, H₂O, CH₄, C₂H₂, N₂O, NO, and HCN were detected for all formulations with the gases SO₂, NH₃, HCl, C₂H₄, and NH₃ found to be for certain formulations only.     

Silicon Seed Priming Combined with Foliar Spray of Sulfur Regulates Photosynthetic and Antioxidant Systems to Confer Drought Tolerance in Maize (Zea mays L.)

Silicon - The present study evaluated the effect of silicon (Si) seed priming and sulfur (S) foliar spray on drought tolerance of two contrasting maize hybrids viz. drought tolerant Hi-Corn 11 and...     

Effect of Sodium Carbonate on the Cloud Point in Alkyl Ether/Brine Systems: Apparent Relation with Dynamic Interfacial Tension Minimum

The effect of Na₂CO₃ on the cloud point in Na₂CO₃/surfactant/brine was investigated using two series of nonionic surfactants, C₁₃EO _x and C₁₇EO _x . The cloud point, T _cp, was found to decrease linearly with increasing Na₂CO₃ concentration. This was attributed to Na⁺ and particularly to CO₃ ^2?salting-out effect. The slope a = dTcp/d[Na₂CO₃] became more and more negative as the degree of ethoxylation is increased, suggesting that the higher the number of ethylene oxide (EO) groups the stronger is the cloud point depression for a given increment in Na⁺and CO₃ ^2?ions in solution. This was also illustrated by the linear variation of ΔT _cp = T _cp,0 ? T _cp,[Na2CO3] with the surfactant degree of ethoxylation.