Guided Fine-Tuning for Large-Scale Material Transfer

We present a method to transfer the appearance of one or a few exemplar SVBRDFs to a target image representing similar materials. Our solution is extremely simple: we fine-tune a deep appearance-capture network on the provided exemplars, such that it learns to extract similar SVBRDF values from the target image. We introduce two novel material capture and design workflows that demonstrate the strength of this simple approach. Our first workflow allows to produce plausible SVBRDFs of large-scale objects from only a few pictures. Specifically, users only need take a single picture of a large surface and a few close-up flash pictures of some of its details. We use existing methods to extract SVBRDF parameters from the close-ups, and our method to transfer these parameters to the entire surface, enabling the lightweight capture of surfaces several meters wide such as murals, floors and furniture. In our second workflow, we provide a powerful way for users to create large SVBRDFs from internet pictures by transferring the appearance of existing, pre-designed SVBRDFs. By selecting different exemplars, users can control the materials assigned to the target image, greatly enhancing the creative possibilities offered by deep appearance capture.     

Some factors affecting delayed ettringite formation in heat-cured mortars

Although more than 10 years of studies on delayed ettringite formation (DEF) have led to consensus in numerous areas of past disagreements, some questions remain experimental work is needed to complete the knowledge of this pathology. Following this objective, this paper studies the influence of pre-existing microcracking, wetting/drying cycles and the type of sulfated addition on DEF in steam cured mortars. The mortar specimens were prepared using an Ordinary Portland Cement and two types of sulfate were added to the mixtures: calcium sulfate (CaSO₄) or sodium sulfate (Na₂SO₄). The results confirm the well-known effect of temperature: no expansion was observed in any of the mixtures cured at room temperature. Moreover, no expansion was observed after 800 days for the reference mortar or for the mortar containing calcium sulfate but all the specimens of heat-cured mortars containing sodium sulfate expanded markedly after about 50 days whatever the supplementary treatments applied (thermal shrinkage or wetting/drying cycles). These results show the significant role played by alkalis in the occurrence of delayed ettringite. The supplementary treatments intended to cause prelimiray microcracking of the specimens did not promote expansion but contributed to a slight acceleration of the reaction. The ultimate values of expansion were similar to those obtained with sound mortars.     

Low-density, microcellular polystyrene foams

Numerous applications have been identified for low-density, microcellular, polymeric foams. In this paper the authors describe a general technique to produce foams of this type with organic-soluble polymers, in particular polystyrene. Open-celled polystyrene foams have been developed with densities of 0.02–0.2 g cm⁻³ and uniform cell sizes of 1–20 μm. By using well-characterized polymers the authors have related form morphology to the phase diagram of the polymer/solvent system employed.     

Apertureless scanning near-field optical microscopy for ion exchange channel waveguide characterization

We report the characterization of an integrated Ag⁺/Na⁺ ion exchange waveguide realized in a silicate glass substrate using apertureless scanning near‐field optical microscopy. Our experimental set‐up is based on the combination of a commercial atomic force microscope with an optical confocal detection system. Thanks to this system, the topography and evanescent optical field at the waveguide top surface are mapped simultaneously. Also, the process of apertureless scanning near‐field optical microscopy image formation is analysed. In particular, fringe patterns appearing in the image reveal the intrinsic interferometric nature of the collected signal, due to interference between the field scattered by the tip end and background fields related to guide losses. We give a quantitative interpretation of these fringes. Evanescent intensity mapping on the sample surface allowed us to extract physical waveguide parameters. In particular, it shows an unambiguous multimode beat along the waveguide propagation axis. Furthermore, we show that analysis of this intensity profile reveals back‐reflection effects from the waveguide exit facet. The resulting standing waves pattern allows us to evaluate the eigenmode propagation constants.     

A Herbivore Tag-and-Trace System Reveals Contact- and Density-Dependent Repellence of a Root Toxin

Foraging behavior of root feeding organisms strongly affects plant-environment-interactions and ecosystem processes. However, the impact of plant chemistry on root herbivore movement in the soil is poorly understood. Here, we apply a simple technique to trace the movement of soil-dwelling insects in their habitats without disturbing or restricting their interactions with host plants. We tagged the root feeding larvae of Melolontha melolontha with a copper ring and repeatedly located their position in relation to their preferred host plant, Taraxacum officinale, using a commercial metal detector. This method was validated and used to study the influence of the sesquiterpene lactone taraxinic acid β-D-glucopyranosyl ester (TA-G) on the foraging of M. melolontha. TA-G is stored in the latex of T. officinale and protects the roots from herbivory. Using behavioral arenas with TA-G deficient and control plants, we tested the impact of physical root access and plant distance on the effect of TA-G on M. melolontha. The larvae preferred TA-G deficient plants to control plants, but only when physical root contact was possible and the plants were separated by 5 cm. Melolontha melolontha showed no preference for TA-G deficient plants when the plants were grown 15 cm apart, which may indicate a trade-off between the cost of movement and the benefit of consuming less toxic food. We demonstrate that M. melolontha integrates host plant quality and distance into its foraging patterns and suggest that plant chemistry affects root herbivore behavior in a plant-density dependent manner.     

Screening of plant species for the phytotreatment of wastewater containing sulphonated anthraquinones

Sulphonated anthraquinones are known to be recalcitrant to biodegradation and are not eliminated by traditional wastewater treatment plants, leading to their accumulation in fresh water. Due to the high cost and limited efficiency of existing physical-chemical treatments, alternative cheaper processes are required to remove these compounds from industrial effluents. Four plant species were tested under hydroponic conditions for their ability to treat model effluents contaminated with mono- and disulphonated anthraquinones. Among them, Rheum rabarbarum (rhubarb) showed the most promising results and was chosen for further investigation. The apparent transpiration stream concentration factor obtained with this plant species reached up to 2.5, indicating a strong phytotreatment potential that should be further explored then exploited.     

Zeolite A imidazolate frameworks

Faujasite (FAU) and zeolite A (LTA) are technologically important porous zeolites (aluminosilicates) because of their extensive use in petroleum cracking and water softening. Introducing organic units and transition metals into the backbone of these types of zeolite allows us to expand their pore structures, enhance their functionality and access new applications. The invention of metal-organic frameworks and zeolitic imidazolate frameworks (ZIFs) has provided materials based on simple zeolite structures where only one type of cage is present. However, so far, no metal-organic analogues based on FAU or LTA topologies exist owing to the difficulty imposed by the presence of two types of large cage (super- and beta-cages for FAU, alpha- and beta-cages for LTA). Here, we have identified a strategy to produce an LTA imidazolate framework in which both the link geometry and link-link interactions play a decisive structure-directing role. We describe the synthesis and crystal structures of three porous ZIFs that are expanded analogues of zeolite A; their cage walls are functionalized, and their metal ions can be changed without changing the underlying LTA topology. Hydrogen, methane, carbon dioxide and argon gas adsorption isotherms are reported and the selectivity of this material for carbon dioxide over methane is demonstrated.     

BTA stat and BTA TRAK: A comparative evaluation of urine testing for the diagnosis of transitional cell carcinoma of the bladder

The calcium-activated neutral protease calpain is activated in several pathological conditions. Calpain usually hydrolyses one or only a few peptide bonds in its substrate. One prominent substrate for calpain is spectrin and it has been shown that alpha-spectrin is the preferred substrate. We now show that the beta-chain of spectrin is also a substrate for calpain proteolysis, and that the cleavage site in each beta-subunit is located at the very C-terminal part of the molecule. Surprisingly, beta1sigma-spectrin is cleaved at a different site than betaIsigma2- and betaIIsigma1-spectrins despite their high degree of sequence identity.     

Developmental mucin gene expression in the human respiratory tract

The epithelial surface of the respiratory tract is coated with a protective film of mucus secreted by epithelial goblet and submucosal gland cells. Histology of the airway mucosa and composition of secretions during the second trimester of fetal life are known to differ from the normal adult in that these secretions show similarities with those of hypersecretory disorders. To provide information regarding cell-specific expression of mucin genes and their relation to developmental patterns of epithelial cytodifferentiation, we studied the expression of eight different mucin genes (MUC1-MUC4, MUC5AC, MUC5B, MUC6, MUC7) in human embryonic and fetal respiratory tract using in situ hybridization. These investigations demonstrated that MUC4 is the earliest gene expressed in the foregut at 6.5 wk, followed by MUC1 and MUC2 from 9. 5 wk of gestation in trachea, bronchi, epithelial tubules, and terminal sacs before epithelial cytodifferentiation. In contrast, MUC5AC, MUC5B, and MUC7 are expressed at later gestational ages concomitant with epithelial cytodifferentiation. During this developmental stage, MUC1 and MUC4 mRNAs are located in goblet and ciliated cells, whereas MUC2 mRNAs are located in basal and goblet cells. MUC5AC expression is confined to goblet cells. In the submucosal glands, MUC2 mRNAs are located in both mucous and serous cells, whereas MUC5B and MUC7 mRNAs are expressed in mucous and in serous cells, respectively. These data suggest distinct developmental roles for MUC1, MUC2, MUC4, MUC5AC, MUC5B, and MUC7 in the elongation, branching, and epithelial cytodifferentiation of the respiratory tract during ontogenesis. Distinct patterns of mucin gene expression are also likely to play an important role in regulating appropriate epithelial cell proliferation and cytodifferentiation in adult airway mucosa as it is indicated by aberrant expression in hypersecretory disorders.     

Motion Panoramas

In this paper we describe a method for analysing video sequences and for representing them as mosaics or panoramas. Previous work on video mosaicking essentially concentrated on static scenes. We generalize these approaches to the case of a rotating camera observing both static and moving objects where the static portions of the scene are not necessarily dominant, as it has been often hypothesized in the past. We start by describing a robust technique for accurately aligning a large number of video frames under unknown camera rotations and camera settings. The alignment technique combines a feature‐based method (initialization and refinement) with rough motion segmentation followed by a colour‐based direct method (final adjustment). This precise frame‐to‐frame alignment allows the dynamic building of a background representation as well as an efficient segmentation of each image such that moving regions of arbitrary shape and size are aligned with the static background. Thus a motion panorama visualizes both dynamic and static scene elements in a geometrically consistent way. Extensive experiments applied to archived videos of track‐and‐field events validate the approach. Copyright © 2004 John Wiley & Sons, Ltd.