Fabrication of Copper Nanowire Films and their Incorporation into Polymer Matrices for Antibacterial and Marine Antifouling Applications

With the ban of tributyltin, copper‐based biocides are now widely used in antifouling coatings as the major active ingredients. Given the past experience of heavy‐metal accumulation in harbors with limited water exchange, there is a significant interest in developing copper materials that greatly reduce the amount of copper ions released into marine surroundings. In this paper, copper nanowires (NWs) encapsulated in polymer matrices are investigated as the means to control the release of copper ions and to achieve a long‐lasting antifouling effect. Very long CuNWs with high aspect ratio in organic solution are drop‐coated onto substrates to fabricate uniform thin films. They are then incorporated into an elastomeric polydimethylsiloxane (PDMS) matrix. A small amount of CuNWs in PDMS can inhibit barnacle cyprid settlement, while it exhibits low mortality to cyprids and nauplii present in the surrounding seawater environment. The low levels of copper released after 50 days suggest that the intersecting and interconnected CuNWs embedded in PDMS could potentially release copper ions continuously over a few years in seawater. This approach provides a novel platform to use hybrid materials as effective marine antifouling coatings, and may be applied to fouling release materials to enhance their antifouling properties.     

In vitro synthesis of biogenic amines by Brochothrix thermosphacta isolates from meat and meat products and the influence of other microorganisms

Twenty Brochothrix thermosphacta strains tested for biogenic amines (BAs) production, formed histamine (6.6-16.2 mg/kg) and tyramine (18.7-35.4 mg/kg) but neither putrescine nor cadaverine. Six of the twenty strains were also investigated in respect of their influence on the synthesis of BAs by Escherichia coli, Pseudomonas sp., Proteus mirabilis and Lactobacillus sakei. In pure culture Escherichia coli produced all of the studied amines (histamine, tyramine, putrescine and cadaverine) with a total concentration of 167.7 mg/kg, P. mirabilis produced a total of 56.7 mg/kg histamine, tyramine and cadaverine, while Lactobacillus sakei and Pseudomonas sp. produced histamine and tyramine, totaling 37.9 and 35.2 mg/kg respectively. All B. thermosphacta promoted cadaverine production by Escherichia coli which increased by 12-68%, and some of them contributed to the appearance of this amine among the metabolites of Pseudomonas. The presence of B. thermosphacta decreased the potential ability of P. mirabilis to produce BAs.     

Tight and uniform layer of covalently bound aminoethylophenyl groups perpendicular to gold surface for attachment of biomolecules

Strongly adhered layers of the compound with the primary amino group directed toward the solution were obtained at the gold surface by chronoamperometric electroreduction of 4-aminoethylobenzenodiazonium salt (AEBD) in acetonitrile solution at appropriately selected potential. The used techniques (EQCM, AFM, EIS, PM, IRRAS) showed that the nature and thickness of formed aminoethylophenyl layer strongly depend on the potential applied to the electrode. Electroreduction of AEBD salt at a potential more negative than -0.6 V (vs Ag/AgCl) leads to about monolayer on the gold surface. Additionally, such a layer was very tight and uniform. The electrochemical measurements indicate that the efficient and precise attachment of biomolecules to the aminoethylophenyl layer is only possible when this layer is formed at appropriate potential. This was shown for ss- and dsDNA.     

Preventive effect of germinated barley foodstuff on diarrhea induced by water-soluble dietary fiber in rats

The two cases presented illustrate the diagnostic difficulties and recommend an approach to use in patients in whom features of acute renal allograft rejection and posttransplant lymphoproliferative disorder (PTLD) appear simultaneously in allograft biopsies. Both patients developed acute allograft rejection episodes in the early post-transplant period followed by severe immunosuppression (OKT-3) and active Epstein-Barr virus infection. In addition to early recognition of light microscopic features of PTLD, immunohistology and in situ hybridization for EBV complement the diagnostic work-up and provide clues to the prompt diagnosis of rapidly developing PTLD affecting the allograft even in the face of persisting rejection.     

The influence of organic myocardial damage on parameters of signal-averaged electrocardiogram in patients with electrically-induced atrial fibrillation

The aim of this study was to assess the effects of myocardium organic damage on time-domain parameters of atrial signal-averaged ECG (ASAECG) in patients with electrically induced paroxysmal atrial fibrillation (PAF). The investigation was done in 120 patients with subjective symptoms of cardiac rhythm disorders suggesting atrial fibrillation and for further analysis were selected 51 patients in whom atrial PAF was induced during transoesophageal pacing (TEP). Patients were divided according to organic damage of myocardium-38 pts (24 male and 14 female, mean age 52.1 +/- 11.6-group I) and without-13 pts (9 male and 4 female, mean age 35.4 +/- 9.9 -group II). In all two dimensional echocardiographic examination, 24-hours Holter monitoring, exercise testing and TEP were made. Recording of ASAECG was done with a commercially available system HIPEC-200 HA Aerotel. The following time-domain parameters of ASAECG were calculated: the root mean square voltage of the terminal 10, 20, 30 ms of the filtered P-wave (RMS 10, 20, 30) and time duration of filtered P-wave (PWD) and also time duration of P-wave from Frank's leads X, Y, Z (XP, YP, ZP). Atrial late potentials (ALP) were defined as the presence of two parameters: RMS 10 < 4 microV and PWD > 123 ms. If we compared time-domain parameters of ASAECG between examined groups it occurred that only the values of PWD attained statistically significant differences, respectively 123.3 +/- 15.4 ms vs 115 +/- 11.2 ms, p < 0.05. In 14 (36.8%) patients from first group and in 2 (15.4%) patients from second ALP were confirmed. We concluded that presence of myocardium organic damage have essentially influenced on time duration of filtered P-wave.     

Prediction of horse carcass composition using linear measurements

An analysis of meat quality performed on 107 horses showed that there are significant relationships between some linear measures of carcasses and the irrespective tissue contents. Thus, there is some potential for fat quantity estimation on the basis of nape fat thickness. The equation for the assessment of fat percentage in the carcass contains one variable, i.e., nape fat thickness only. However, even in this case the obtained multiple correlation coefficient was high, R=0.86 and the estimation error was at the level of 2.5%. As a consequence, the estimation of fat deposits in carcasses may be made more objective, and the measurement of nape fat thickness may be applied for the assessment of fat in the live animal.     

First recorded outbreak of yellow fever in Kenya, 1992-1993. II. Entomologic investigations

OBJECTIVES: The physiology of the female sexual response and its molecular mediators remain poorly understood. Nitric oxide (NO) is synthesized in neurons and is a potent relaxor of vascular and nonvascular smooth muscle. In this study, we hypothesize that vaginal atrophy and declining sexual function during menopause may be NO dependent. Using the rat as an experimental model, we examined the expression and topologic localization of vaginal NO synthase (NOS) and the concomitant induction of apoptosis under normal and estrogen-depleted conditions. METHODS: Thirty rats were categorized into six groups on the basis of phase of the estrous cycle or estrogen status after oophorectomy. The expression and cellular localization of NOS was examined in frozen sections using specific antibodies against neuronal (N-NOS) and endothelial NOS (E-NOS). Apoptotic cells were identified in situ using the terminal transferase technique (TUNEL). Trichome staining was performed in all specimens to determine smooth muscle/collagen ratios. RESULTS: N-NOS immunoreactivity was localized to nerve fibers supplying vaginal smooth muscle, perivascular nerve plexuses, and lamina propria. E-NOS was localized to vascular endothelium and perivascular smooth muscle fibers. Both E-NOS and N-NOS expression in intact cycling animals was highest during proestrous and lowest during metestrous. After oophorectomy, levels of both N-NOS and E-NOS declined substantially compared with those of intact animals, and there was a parallel induction of apoptosis. Estrogen withdrawal also resulted in increased vaginal atrophy, intramural collagen accumulation, and perivascular wall thickening, as identified by trichome staining. Estrogen replacement resulted in a significant increase in E-NOS and N-NOS expression, as well as diminished apoptosis and vaginal atrophy. CONCLUSIONS: This cellular distribution of NOS in the rat vagina suggests that NO may modulate both vaginal blood supply and vaginal smooth musculature. Estrogen appears to play a critical role in concomitantly regulating vaginal NOS expression and apoptosis in nerves, smooth muscle, vascular endothelium, and epithelium of the rat vagina. These findings may have significant clinical implications for the pathophysiology of postmenopausal female sexual dysfunction.     

A circuit technology for high-speed battery-operated 16-Mb CMOSDRAM's

A battery-operated 16-Mb CMOS DRAM with address multiplexing has been developed by using an existing 0.5-μm CMOS technology. It can access data in 36 ns when powered from a 1.8-V battery-source, and 20 ns at 3.3 V. However, this device requires a mere 57 mA of operating current for an 80-ns cycle time and only 5 μA of standby current at 3.3 V. To achieve both high-speed and low-power operation, the following four circuit techniques have been developed: 1) a parallel column access redundancy (PCAR) scheme coupled with a current sensing address comparator (CSAC), 2) an N&PMOS cross-coupled read-bus-amplifier (NPCA), 3) a gate isolated sense amplifier (GISA) with low V_T, and 4) a layout that minimizes the length of the signal path by employing the lead on chip (LOC) assembly technique     

Controversies about the occurrence of chloral hydrate in drinking water

Besides trihalomethanes (THMs) and haloacetic acids (HAAs), chloral hydrate (CH) is the next most prevalent disinfection by-product (DBP) in drinking water, formed as a result of the reaction between chlorine and natural organic matter (NOM). Chloral hydrate (trichloroacetaldehyde) should be limited in drinking water because of its adverse health effect. The controversies concerning the appearance of CH in disinfected water found in literature are discussed in the present paper. According to some authors the CH yield during chlorination of water depends only on TOC. However, there are other data available that do not confirm this relationship. Another fact requiring clarification is the dependence of CH formation on pH. In the present study, CH formation is analysed in different types of water disinfected with different doses of chlorine. Formation of CH is correlated with the dose of Cl₂ and the contact time. The formation of chloral hydrate takes place as long as chlorine is available in the water. Total organic carbon (TOC) is not considered the main factor influencing the production of chloral hydrate in water treated with Cl₂ as the production depends also on the nature of NOM. Higher levels of CH are observed at alkaline conditions (pH > 7). A significant correlation (R² > 0.9) between the concentrations of chloral hydrate and chloroform has been observed. The preozonation increases significantly the chloral hydrate formation potential in the water treated. Biofiltration process does not remove all of CH precursors and its efficiency depends strongly on the contact time. Chloral hydrate was analyzed by gas chromatography with electron capture detector with the detection limit 0.1 μg L⁻¹.     

An electron microscopy three‐dimensional characterization of titania nanotubes

To characterize complex, three‐dimensional nanostructures, modern microscopy techniques are needed, such as electron tomography and focused ion beam (FIB) sectioning. The aim of this study was to apply these two techniques to characterize TiO₂ nanotubes in terms of their size, shape, volume, porosity, geometric surface area, and specific surface area (SSA). For these experiments, titania nanotubes were fabricated by means of the electrochemical oxidation of titanium at a voltage of 20 V for 2 hr followed by heat treatment at 450°C for 3 hr to change the amorphous structure into a crystalline anatase structure. The quantitative data obtained from the FIB and electron tomography reconstructions show a high similarity in porosity and some differences in SSA. These might be the result of differences in resolution between the two reconstruction techniques.