On the growth mechanism of single-walled carbon nanotubes by catalytic carbon vapor deposition on supported metal catalysts

A comprehensive kinetic study was performed to throw light on the formation mechanism of single walled carbon nanotubes (SWNTs) in chemical vapor deposition processes. SWNTs were synthesized by catalytic decomposition of methane or ethylene on supported transition metal catalysts. Kinetic curves (the amount of SWNT as a function of time) were obtained as a function of the nature and the preparation of the supported catalysts, temperature, the fluxes of the gases (the reagent hydrocarbon and the carrying gas), and the partial pressure of the hydrocarbon. The final products were characterized by transmission electron microscopy, Raman spectroscopy, chemical analysis, and thermogravimetric measurements. The fundamental factors determining the SWNT formation are discussed in detail, taking into consideration several observations from the literature as well.     

Hydrocarbon decomposition in alumina membrane: an effective way to produce carbon nanotubes bundles

Carbon nanotubes were synthesised within the pores of an alumina membrane. The membrane had 200 nm diameter pores and 60 microm thickness, and ethylene was used as carbon source. Membrane dissolution by HF results in a bundle of parallel open tubes, aligned without macroscopic defects. The external diameter of the tubes is uniform and there is no evidence of any amorphous carbon. Wall thickness control was obtained by varying the reaction time, length by the thickness of alumina membrane, and external tube diameter by the membrane pore size. Scanning (SEM) and transmission (TEM) electron microscopy, atomic force microscopy (AFM), X-ray diffraction, thermogravimetric analysis (TG) and surface area evaluation by nitrogen adsorption were used for the characterization of membrane and nanotubes.     

Device for the reversed-phase separation and on-target deposition of peptides incorporating a hydrophobic sample barrier for matrix-assisted laser desorption/ionization mass spectrometry

The separation of peptide mixtures from proteolytic cleavage is often necessary prior to mass spectrometry (MS) to enhance sensitivity and peptide mapping coverage. When buffers, salts, and other higher abundance peptides/contaminants are present, competition for charge during the electrospray ionization and matrix-assisted laser desorption/ionization (MALDI) processes can lead to ion suppression for the targeted analyte(s). In this note, a simple reversed-phase microcolumn sample separation and deposition device (Sep-Dep) is described. The use of this device improves or renders possible the analysis of complex or contaminated peptide mixtures by MALDI-MS. The method is simple and inexpensive and utilizes single-use low-cost Geloader-type columns packed with reversed-phase material. The device described utilizes an open column, allowing for a gradient or narrow-step gradient to be applied by any solvent delivery system or manually with a pipet. A key feature of the device is a deposition chamber that can be custom-built to hold any MALDI target. The Sep-Dep device is attached directly to an in-house vacuum line and draws solvent from the open-ended LC column. The elution of separated peptides is performed directly onto a target that has been treated with a hydrophobic barrier. This barrier effectively isolates fractions and improves the quality and morphology of the matrix crystals. The method produces efficient separations of proteolytic peptides, significantly reducing signal suppression effects in MALDI.     

The yield,fatty acid composition and physical properties of milk fat obtained by feeding soya oil to dairy cows

The presence in the bovine mammary gland of a desaturase specific for the conversion of stearic to oleic acid allows the manipulation of the physical properties of milk fat by varying the dietary intake of C₁₆ and C₁₈ fatty acids. In particular, feeding the dairy cow an oil with a high C₁₈: C₁₆ ratio should allow the proportion of milk fat that is liquid at 5°C to be increased, with a consequent improvement in the low-temperature spreadability of butter. In this paper, the effect of feeding concentrate rations containing (a) soya oil as the free oil and as cracked soya beans; (b) various levels of soya oil, the ration being offered twice or 24-times daily, on the thermal properties of the milk fat and on the yield of milk constituents is examined in detail. Feeding ratios containing free soya oil greatly increased the proportion of milk fat liquid at 5°C, whereas cracked soya oil gave only slight increases. Proportion and yield of milk fat were decreased by feeding soya oil twice daily but were increased by continuous feeding.     

Coulomb fission event resolved progeny droplet production from isolated evaporating methanol droplets

An electrodynamic balance was used to levitate a single methanol droplet while it evaporated down to, and just beyond, its first encountered Coulomb fission limit as ascertained by the time dependence of its laser light scatter signal. At its Coulomb limit, the primary droplet fragmented and approximately 81% of its net charge was released in the form of small droplets that are termed progeny. The window of time over which the progeny droplets were ejected from the electrodynamic balance was deltat = 850 ms, indicating that these droplets were formed with a range of mass-to-charge values. An average of 13.2 (+/-4.4) progeny droplets were detected as a result of this fragmentation event. On the assumption that the average initial radius of the progeny droplets were one-tenth the radius of the droplet undergoing the Coulomb fission event, approximately 50% of the total net charge ejected would not have been carried by the 13 progeny droplets detected.     

Quantitative electroencephalographic profiles for children with autistic spectrum disorder.

The present study examined quantitative electroencephalographic (QEEG) profile for children with autistic spectrum disorder (ASD). Five-minute QEEG data were obtained from 90 normal controls (NCs) and 66 children with ASD. Spectrum analyses revealed that ASD children showed significantly less relative alpha and more relative delta than NC. Specifically, 26% of ASD children and 2% of NCs showed 1.5 SDs of relative alpha below the normative mean. Children with this QEEG profile had 17 times the risk of having ASD than those without such a profile. Sensitivity and specificity of relative alpha were 91% and 73%, respectively. Split-half cross-validation yielded a sensitivity of 76%. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Assessment of nuclear energy sustainability index using fuzzy logic

Nuclear energy is increasingly perceived as an attractive mature energy generation technology that can deliver an answer to the worldwide increasing energy demand while respecting environmental concerns as well as contributing to a reduced dependence on fossil fuel. Advancing nuclear energy deployment demands an assessment of nuclear energy with respect to all sustainability dimensions.In this paper, the nuclear energy, whose sustainability will be assessed, is governed by the dynamics of three subsystems: environmental, economic, and sociopolitical. The overall sustainability is then a non-linear function of the individual sustainabilities. Each subsystem is evaluated by means of many components (pressure, status, and response). The combination of each group of indicators by means of fuzzy logic provides a measurement of sustainability for each subsystem.     

Technique to Measure 3D Work-of-Fracture of Concrete in Compression

A high-resolution 3D scanning technique called X-ray microtomography was applied to measure internal damage and crack growth in small mortar cylinders loaded in compression. Synchrotron-based microtomography allows us to resolve internal features that are only a few microns in size. Multiple tomographic scans were made of the same specimen at different levels of deformation using a custom-built loading frame. 3D image analysis was used to measure internal crack growth during each deformation increment. Measured load-deformation curves were used to calculate the nonrecoverable work of the external load on the specimen. Nonrecoverable work of load was related to measured incremental change in crack surface area to estimate work-of-fracture in three dimensions. Initial results indicate a nearly constant work-of-fracture for the early stages of crack growth. These results show that basic fracture mechanics principles may be applied to concrete in compression; however, we must think in terms of 3D multiple crack systems rather than traditional 2D single crack systems.