Cowpea cooking characteristics as affected by micronisation temperature: a study of the physicochemical and functional properties of starch

Bechuana white cowpeas were micronised to three temperatures (130, 153 and 170 °C). Cooking properties of the cowpea seeds and the role of starch‐related properties were studied. In all cases, micronisation significantly reduced the cooking time and thus the time required for the cowpea seeds to attain a suitably soft texture. This was attributed in part to the significant improvement in rate of water absorption during cooking and starch pre‐gelatinisation, as evidenced by loss of birefringence and increased susceptibility of the cowpea starch to α‐amylase digestion. However, micronisation to 170 °C resulted in a severe deterioration in pasting properties of the cowpea flour, possibly due to starch depolymerisation and/or amylose‐associated crosslinking. Owing to these changes, cowpea seeds micronised to 170 °C required a longer cooking time than the other two micronised samples. Flour prepared from cowpea seeds micronised to 170 °C may have limited starch functionality. Copyright © 2006 Society of Chemical Industry     

Cracking of concrete structures due to imposed strains with regard to design of reinforcement

The principles for control of cracking in concrete structures due to imposed strain are investigated in this paper. The effects of uniform and non-uniform cooling and shrinkage are studied in medium-thick walls with regard to the amount of reinforcement necessary to distribute cracks. The influence of reinforcement on the behavior after the first crack is investigated, in particular its ability to reduce crack widths. The restraint force is significantly reduced for non-uniformly distributed imposed strain due to softening and cracking in the concrete. The amount of minimum reinforcement needed to distribute cracks is therefore significantly smaller for imposed strain in the form of drying shrinkage than for thermal imposed strain. Crack reinforcement is most effective for structures with large dimensions in the direction of external restraint.     

Archiving and absolute quantitation of solutes separated by single charged droplet coulomb explosion

The electrospray (ES) ion source relies on the transfer of low-volatility solutes to the gas phase as an outcome of coulomb explosion events of charged droplets generated by electrical atomization. Introduced here are two methods for archiving compounds separated by coulomb explosion of single droplets having net charge that had been levitated in an electrodynamic balance. We categorized compounds separated by the explosion as either material ejected, including progeny droplets, or the material retained in the main residue. The potential for this methodology is illustrated by (i) qualitative characterization of solute states, aqueous versus precipitated in the separated material, and (ii) absolute quantitation of solutes separated by such an event. For a droplet containing 5 x 10(7) 20-nm-diameter fluospheres, its first encountered coulomb explosion event resulted in the ejection of 1.70% of them. The capability to acquire such detailed information regarding the individual steps in the process of transferring low-volatility solutes to the gas phase in an ES ion source is essential to develop strategies for absolute quantitation in applications of ES mass spectrometry.     

Apparatus for preparing mimics of suspended particles in the troposphere and their controlled deposition onto individual lung cells in culture with measurement of downstream biological response

Inhalation exposure to particles <10 microm in size that are suspended in the troposphere (PM10) is a factor in respiratory and cardiovascular diseases. The extent of the injury, local to systemic inflammation, is dependent on the number, size, and composition of the particles to which an individual is exposed. The physical properties of and compounds on PM10 that are responsible for these adverse effects on human health are the subject of intense investigation. Here, we report a laboratory method that involved the creation of 1-120 particles per trial that were of known size and composition, followed by deposition of them directly onto individual human lung cells within a cell culture, and after an incubation period, a downstream biological response was measured. To illustrate this methodology, particles that each contained 50 pg of lipopolysaccharide were created and deposited onto individual cells over a region <0.36 mm2 within a genetically modified A549 cell culture. The biological readout was the relative expression of intercellular cell adhesion molecule 1 after 24 h of incubation using an immunocytochemistry assay. The apparatus and methodology introduced here enables studies at the interface between the relevant but diverse areas of atmospheric particle chemistry and lung cell biology to identify the chemical and physical factors of PM10 that cause/exacerbate respiratory and cardiovascular diseases by triggering various biological pathways.     

Nanocomposite bulk of mechanically milled Al-Pb samples consolidated pore-free by the high-energy rate forming technique

It is shown that pore-free bulk samples were produced by the high-energy rate forming axis-symmetrical powder compaction method for different application purposes in case of the very different, immiscible Al and Pb metal pair. The starting Al-Pb nanocomposites were made by mechanical milling of atomized Al and Pb powders either in a SPEX 9000 or a Fritsch Pulverisette 4 mill. Due to the conditions that milling was carried out in air, the PbO layer, originally existing at the surface of the atomized Pb powder, ruptured and was also dispersed in the composite. The presence of the nano PbO particles was proven by XRD and TEM (BF, DF, SAED). When the energy of milling was high, the PbO crystallites became so small that they could hardly be seen by XRD technique. Local distribution of the PbO nanoparticles was still visible in a TEM, using the process diffraction method. Both XRD and SAED proved to be useful for the evaluation of the results of the milling process and compaction.     

Coenzymes Q in lemon shark liver

Earlier studies have shown that some extracts of nonpolar lipids from lemon shark liver are able to stimulate the reticuloendothelial system (RES) of experimental animals. This communication reports the identification of the coenzymes Q as the constituents of a fraction from lemon shark liver lipid which showed intense biological activity.     

Downlink Capacity Analysis of Collaborative Crossed Timeslots in CDMA TDD Systems

Traffic asymmetry between uplink and downlink is expected to be a remarkable 3G characteristic in cellular mobile multimedia communications. CDMA system with TDD is a good solution to this traffic asymmetry. However, the level of traffic asymmetry may be significantly different from a cell to another cell. To tackle this problem and to support the traffic hot spot, crossed slots are examined. The use of crossed slots is restricted within a certain range of a cell by investigating the inter-cell interference and the maximum planned load factor. We examine the radius of inner zone and discuss the capacity of downlink crossed slots for various neighbor cell environments. Computational results show that the capacity increase in the target cell is outstanding by reducing the service range of neighbor cells. When all six neighbors reduce their service range by 20%, the capacity at target cell crossed slot is increased by 35%. Monte Carlo simulation is performed with large scale fading to verify the numerical analysis.