Simultaneous handover scheme for IEEE 802.11 WLANs with IEEE 802.21 triggers

Handover performance in wireless networks is important, especially nowadays, when multimedia services are becoming increasingly available over the wireless devices. However, users expect uncompromised mobility when using the service. Thus, the support of multimedia services is not possible if handover is inefficient. At the same time it is clear that a strict separation between IP Layer and the Link Layer results in built-in sources of delay. The paper discusses the IEEE 802.11 and Mobile IPv4 handover performance in practical scenarios. We introduce a new simultaneous handover scheme with IEEE 802.21 triggers. In order to verify the handover performance, simulation experiments have been conducted, whose results are also presented and discussed.     

Development of a surface to increase retinal pigment epithelial cell (ARPE-19) proliferation under reduced serum conditions

Age related macular degeneration of the eye is brought about by damage to the retinal pigment epithelium (RPE) and is a major cause of adult blindness. One potential treatment method is transplantation of RPE cells grown in vitro. Maintaining RPE cell viability and physiological function in vitro is a challenge, and this must also be achieved using materials that can be subsequently used to deliver an intact cell sheet into the eye. In this paper, plasma polymerisation has been used to develop a chemically modified surface for maintaining RPE cells in vitro. Multiwell plates modified with a plasma copolymer of allylamine and octadiene maintained RPE cell growth at a level similar to that of TCPS. However, the addition of bound glycosaminoglycans (GAGs) to the plasma polymerised surface significantly enhanced RPE proliferation. Simply adding GAG to the culture media had no positive effect. It is shown that a combination of plasma polymer and GAG is a promising method for developing suitable surfaces for cell growth and delivery, that can be applied to any substrate material.     

Mechanical and Tribological Properties of Thin Remote Microwave Plasma CVD a-Si:N:C Films from a Single-Source Precursor

Silicon carbonitride (a-Si:N:C) films produced by remote plasma chemical vapor deposition (RP-CVD) were investigated. Tetramethyldisilazane as a single-source precursor and (H₂+N₂) upstream gas mixture for plasma generation were used. The influence of the upstream gas composition on the structure, density, mechanical and tribological properties of the films deposited on p-type Si (001) wafers (both heated—T _s =300°C and unheated—T _s =30°C) are reported. The H₂ RP-CVD process was found to result in the formation of outstanding low friction (0.04) and high hardness (H=27-31 GPa) a-Si:N:C films exhibiting promisingly high H/E values.     

How many protein‐coding genes are there in the Saccharomyces cerevisiae genome?

We have compared the results of estimations of the total number of protein-coding genes in the Saccharomyces cerevisiae genome, which have been obtained by many laboratories since the yeast genome sequence was published in 1996. We propose that there are 5300-5400 genes in the genome. This makes the first estimation of the number of intronless ORFs longer than 100 codons, based on the features of the set of genes with phenotypes known in 1997 to be correct. This estimation assumed that the set of the first 2300 genes with known phenotypes was representative for the whole set of protein-coding genes in the genome. The same method used in this paper for the approximation of the total number of protein-coding sequences among more than 40 000 ORFs longer than 20 codons gives a result that is only slightly higher. This suggests that there are still some non-coding ORFs in the databases and a few dozen small ORFs, not yet annotated, which probably code for proteins.     

A system for rapid large-area monitoring of gamma dose rates in the environment based on MCP-N (LiF:Mg,Cu,P) TL detectors

One lesson learned from the Chernobyl accident was that the spatial distribution of far-field contamination was strongly non-uniform due to local variation of atmospheric conditions, such as wind direction, rain etc. An environmental monitoring system using highly sensitive thermoluminescent LiF:Mg,Cu,P (MCP-N) detectors has been completed and field-tested. The system consists of 3000 MCP-N detectors in 1000 TLD cards (three TLDs per card), two Mikrolab automatic TL readers, heating ovens, and specially developed software which includes a database for rapid evaluation of results. The main dosimetric parameters of MCP-N dosemeters, such as thermally-induced fading, light sensitivity, minimum detectable dose, self-dose, zero-dose, energy response up to 6-7 MeV, influence of annealing and readout conditions on detector stability, have been tested. About 100 locations over an area of about 15,000 km2 in the south of Poland were selected for measurements lasting from 4 days to 3 months. The kerma rates measured over a 4 day screening period agree well with kerma rates determined over a 75 day monitoring period. Results from short- and long-term exposure periods agree well with those performed using MTS-N (LiF:Mg,Ti) over southern Poland in 1985, before the Chernobyl accident. Thus, using the system based on MCP-N detectors, one is able simultaneously to monitor environmental radiation kerma rates at a large number of locations over periods of four days or less. Provided natural background kerma rates at selected monitoring points are available prior to the accident, the system can be applied to assess kerma rates rapidly in the environment, following a nuclear accident.     

Solving Failing Queries through Cooperation and Collaboration

Sometime Query Answering Systems (QAS) for a Distributed Autonomous Information System (DAIS) may fail by returning the empty set of objects as an answer for a query q. Systems in DAIS can be incomplete, have hierarchical attributes, and the semantics of attributes and their values may differ between sites. Also, if there are no objects in S matching q, the query may fail when submitted to S. Alternatively, QAS for S may try to relax the query q as it was proposed in T. Gaasterland (IEEE Expert, 12(5), 1997, 48–59), P. Godfrey (International Journal of Cooperative Information Systems, 6(2), 1997, 95–149) and W. Chu et al. (Journal of Intelligent Information Systems, 6(2/3), 1996, 223–259). It means that q can be replaced by a new more general query. Clearly, the goal is to find possibly the smallest generalization of q which will not fail in S. Smaller generalizations guarantee higher confidence in objects returned by QAS. Such QAS is called cooperative (only one site is involved). Queries may also fail in S when some of the attributes listed in q are outside the domain of S. To resolve this type of queries, assuming that S is a part of DAIS, we may extract definitions of such attributes from information systems residing at some of the remote sites for S and next use them to approximate q in S. In order to do that successfully, we assume that all involved systems have to agree on the ontology of some of their common attributes Z.W. Raś and A. Dardzińska (Information Systems International Journal, 29(1), 2004, 47–58; Proceedings of FQAS 2004 Conference, LNCS/LNAI No. 3055, 2004, pp. 125–136); Z.W. Raś and S. Joshi, Fundamenta Informaticae Journal, 30(3/4), 1997, 313–324. QAS based on the above strategy is called collaborative (minimum two sites are involved). Similarly, a query may fail in S when the granularity of an attribute used in q is finer than the granularity of the same attribute in S. This paper shows how to use collaboration and cooperation approach to solve failing queries in DAIS assuming that attributes are hierarchical. Some aspects of a collaboration strategy dealing with failing query problem for non-hierarchical attributes have been presented in Z.W. Raś and A. Dardzińska (Information Systems International Journal, 29(1), 2004, 47–58; Proceedings of FQAS 2004 Conference, LNCS/LNAI No. 3055, 2004, pp. 125–136).     

Determination of Young''''s modulus by nanoindentation

Loadanddepthsensingindentationtechniqueisveryusefulinprobingthemechanicalpropertiesofmaterialsonsmallscales[1—5].Youngsmodulusisoneofthemostcommonlyconcernedmaterialpropertiesmeasuredbythiskindoftechnique.Conventionally,itisachievedonthebasisofthemethodproposedbyOliverandPharr[4]usingthewell-knownrelationship:whereSuistheinitialslopeofunloadingcurve,EristhereducedmodulusandrelatedwiththeYoungsmodulusEandPoissonsratioνoftheindentedmaterialandthose(Ei,ni)oftheindenterbytheequation1/Er=(1-n2…     

叶酸-青霉素G酰化酶对SKOV3实体肿瘤靶向性的实验研究

采用Iodogen法对叶酸-青霉素G酰化酶(Folate-conjugated Penicillin G Amidase,F-PGA)和PGA进行125I标记。将纯化后的标记物由尾静脉注入荷SKOV3实体瘤裸鼠体内,观察F-PGA对叶酸受体阳性的SKOV3的靶向性。结果显示:标记产品纯化后放化纯度>95%,且体内外稳定性较好;荷SKOV3肿瘤的裸鼠注射125I-F-PGA后4~24 h肿瘤显像较清晰,而注射125I-PGA组所有时相均未见明显的肿瘤部位放射性浓聚影;125I-F-PGA组的肿瘤与健侧肌肉的摄取比值(T/M)明显高于对照组(F=13.38,P=0.014 6),且在非靶组织中清除较快。表明F-PGA在荷瘤鼠体内能特异性地与叶酸受体阳性的SKOV3实体肿瘤进行靶向结合,其T/NT>1,有望用于靶向治疗。     

Regularization of the inverse heat conduction problem by the discrete Fourier transform

Two methods of solving the inverse heat conduction problem with employment of the discrete Fournier transform are presented in this article. The first one operates similarly to the SVD algorithm and consists in reducing the number of components of the discrete Fournier transform which are taken into account to determine the solution to the inverse problem. The second method is related to the regularization of the solution to the inverse problem in the discrete Fournier transform domain. Those methods were illustrated by numerical examples. In the first example, an influence of the boundary conditions disturbance by a random error on the solution to the inverse problem (its stability) was examined. In the second example, the temperature distribution on the inner boundary of the multiply connected domain was determined. Results of calculations made in both ways brought very good outcomes and confirm the usefulness of applying the discrete Fournier transform to solving inverse problems.