Use of recycled copper slag for blended cements

Copper slag is a by‐product generated during smelting to extract copper metal from the ore. The copper slag obtained may exhibit pozzolanic activity and may therefore be used in the manufacture of addition‐containing cements. In this paper the effect of the incorporation of the copper slag in cement is measured. Blends of copper slag with Portland cement generally possess properties equivalent to Portland cement containing fly ash, but very different to the silica fume incorporation. Copper slag and fly ash reduce the heat of hydration more effectively than silica fume in mortars. The replacement of 30% cement by copper slag reduces the flexural and compressive strength in a similar way to fly ash; however, after 28 days, the reduction is less than the percentage of substitution. Hydrated calcium aluminate phases were analysed using scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques. The pozzolanic activity of copper slag is similar to that of fly ash and higher than silica fume. In the presence of low water/cement ratios, certain pozzolanic materials produce a very compact cement paste that limits the space available for hydration products, a determining factor in the formation of hydrated calcium aluminates. SEM was found to be a useful analytical technique when aluminates are formed and can be clearly detected by XRD. Copyright © 2008 Society of Chemical Industry     

Time Decay of the Activity of the Reduction Reaction of NO by CO on a Pd/Al2O3 Catalyst

An experimental study is made of the time decay of activity of the CO–NO reaction on a Pd/Al₂O₃ looking at the effect on reaction order and apparent activation energy. The optimum kinetics parameters fitting the steady state data at moderate pressures are determined. The time decay curves are analyzed through various catalyst deactivation models.     

Manifold mapping: a two-level optimization technique

In this paper, we analyze in some detail the manifold-mapping optimization technique introduced recently [Echeverría and Hemker in space mapping and defect correction. Comput Methods Appl Math 5(2): 107—136, 2005]. Manifold mapping aims at accelerating optimal design procedures that otherwise require many evaluations of time-expensive cost functions. We give a proof of convergence for the manifold-mapping iteration. By means of two simple optimization problems we illustrate the convergence results derived. Finally, the performances of several variants of the method are compared for some design problems from electromagnetics.     

A fuzzy clustering algorithm enhancing local model interpretability

In this work, simple modifications on the cost index of particular local-model fuzzy clustering algorithms are proposed in order to improve the readability of the resulting models. The final goal is simultaneously providing local linear models (reasonably close to the plant’s Jacobian) and clustering in the input space so that desirable characteristics (regarding final model accuracy, and convexity and smoothness of the cluster membership functions) are improved with respect to other proposals in literature. Some examples illustrate the proposed approach.     

Mining data from intensive care patients

In this paper we describe the application of data mining methods for predicting the evolution of patients in an intensive care unit. We discuss the importance of such methods for health care and other application domains of engineering. We argue that this problem is an important but challenging one for the current state of the art data mining methods and explain what improvements on current methods would be useful. We present a promising study on a preliminary data set that demonstrates some of the possibilities in this area.     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

Comparison between photocatalytic ozonation and other oxidation processes for the removal of phenols from water

Photocatalytic ozonation (1O₃ + VUV + TiO₂), ozonation (O₃), catalytic ozonation (O₃ + TiO₂), ozone photolysis (O₃ + VUV), photocatalysis (TiO₂ + VUV) and photolysis (VUV) have been compared in terms of formation of intermediates, extent of, mineralization (TOC, COD, chloride, nitrate) and kinetics in the aqueous treatment of three phenols (phenol, p‐chlorophenol and p‐nitrophenol). In all cases, photocatalytic ozonation led to lower degradation times for chemical oxygen demand and total organic carbon removal. Intermediates formed were similar in the different oxidation systems with some exceptions. They can be classified into three different types: polyphenols (resorcinol, catechol, hydroquinone), unsaturated carboxylic acids (maleic and fumaric acids) and saturated carboxylic acids (glyoxylic, formic and oxalic acids). First order kinetic equations have been checked for the oxidation processes studied in the case of the parent compound. Rate constants of these systems have also been calculated. Copyright © 2005 Society of Chemical Industry     

Fullerene Reactivity in an Oxygen Plasma

Fullerene reactivity in an oxygen plasma was measured and compared with those determined under the same conditions for a comprehensive set of 50 carbon materials. The possible reasons for the high plasma reactivity of the fullerene sample in an oxygen plasma are discussed.     

Stroke in teenagers

Between 3.7% and 8.5% of all strokes occur before the age of 45 years old. In the population under 15 years of age, the annual incidence of strokes is 2.7 per 100,000 children, with ischaemic strokes making up 1.2 and haemorrhagic strokes 1.5 of this total. The main characteristic of ischaemic strokes in childhood is the wide variety of diagnoses involved. Some of these, such as congenital cardiopathy, are rare in adults, as are dissections and arterial dysplasias, arteritis, hereditary connective tissue disorders and disorders of metabolism. Similarly, the aetiology of haemorrhagic stroke is also very varied, with bursting of a vascular malformation or aneurysm being the commonest. Other aetiologies are disorders of haemostasis, arteritis, migraine, retarded post-traumatic phenomena and the use of drugs and sympathomimetic agents. The personal, family and social repercussions are considerable, since both ischaemic and haemorrhagic strokes have an appreciable mortality and morbidity.     

Ventilatory response to severe acute hypoxia in guinea-pigs and rats with high hemoglobin-oxygen affinity induced by cyanate

Laparoscopic pelvic lymph node dissection has been applied as a minimally invasive staging technique for men with prostate cancer. This procedure has been shown to shorten markedly postoperative hospitalization, decrease analgesic requirements and shorten convalescence period compared to open pelvic node dissection. However, the laparoscopic procedure takes longer to perform and many disposable instruments are used, thus increasing the cost. We determine the overall cost of laparoscopic versus open pelvic lymph node dissection. Between January 1989 and April 1992, 61 men underwent only staging pelvic lymph node dissection for cancer of the prostate at a single university teaching hospital. Of these patients 11 and 50 underwent open and laparoscopic pelvic lymph node dissection, respectively. Information from the hospital business office was reorganized into preoperative, intraoperative and postoperative expenses. All individual charges were transformed up or down to the dollar amounts of the 1990 to 1991 fiscal year so as to correct for inflationary changes. Preoperative costs were not significantly different between the 2 operative approaches. Intraoperative expenses were 52% greater if laparoscopic pelvic lymph node dissection was performed and can be explained by the longer operative times and use of disposable instrumentation. However, the postoperative period lasted an average of 1.61 days following laparoscopic pelvic lymph node dissection. Postoperative nursing and analgesic requirements were significantly more for patients undergoing open pelvic lymph node dissection. The overall postoperative costs following open pelvic lymph node dissection were 280% more expensive than for the laparoscopic procedure. The overall total costs were approximately $1,250 more for laparoscopic pelvic lymph node dissection. Wages lost or earned during this period and rapid return to normal activity following laparoscopic pelvic lymph node dissection would, in our opinion, justify this additional cost.