Prediction of mass transfer coefficients in a pulsed disc and doughnut extraction column

A study of the mass transfer performance for a pulsed disc and doughnut extraction column has been presented for a range of operating conditions. The mass transfer performance has been investigated for both directions of mass transfer. This study has examined the mass transfer coefficients which has incorporated the effects of back‐mixing in the continuous phase. The effect of operating variables including pulsation intensity and dispersed and continuous phase velocities on volumetric overall mass transfer coefficient has been investigated. The experiments showed that mixer‐settler, transition and emulsion regimes exist in the column depending on the pulse characteristics. In the present work, effective diffusivity is substituted for molecular diffusivity in the Gröber equation for estimation of overall mass transfer coefficients. The enhancement factor is determined experimentally and there from a single empirical correlation is derived for prediction of enhancement factor in terms of Reynolds number, holdup and Eötvös number for all operating regimes and each mass transfer direction. The experimental results are in very good agreement with the values calculated by the proposed equation. © 2011 Canadian Society for Chemical Engineering     

Investigation of factors affecting rural drinking water consumption using intelligent hybrid models

Identifying the factors affecting drinking water consumption is essential to the rational management of water resources and effective environment protection. In this study, the effects of the factors on rural drinking water demand were studied using the adaptive neuro-fuzzy inference system (ANFIS) and hybrid models, such as the ANFIS-genetic algorithm (GA), ANFIS-particle swarm optimization (PSO), and support vector machine (SVM)-simulated annealing (SA). The rural areas of Hamadan Province in Iran were selected for the case study. Five drinking water consumption factors were selected for the assessment according to the literature, data availability, and the characteristics of the study area (such as precipitation, relative humidity, temperature, the number of subscribers, and water price). The results showed that the standard errors of ANFIS, ANFIS-GA, ANFIS-PSO, and SVM-SA were 0.669, 0.619, 0.705, and 0.578, respectively. Therefore, the hybrid model SVM-SA outperformed other models. The sensitivity analysis showed that of the parameters affecting drinking water consumption, the number of subscribers significantly affected the water consumption rate, while the average temperature was the least significant factor. Water price was a factor that could be easily controlled, but it was always one of the least effective parameters due to the low water fee.     

Extended Antibonding States and Phonon Localization Induce Ultralow Thermal Conductivity in Low Dimensional Metal Halide

Thermal conductivity, which measures the ease at which heat passes through a crystalline solid, is controlled by the nature of the chemical bonding and periodicity in the solid. This necessitates an in-depth understanding of the crystal structure and chemical bonding to tailor materials with notable lattice thermal conductivity (κ_L). Herein, the nature of chemical bonding and its influence on the thermal transport properties (2–523 K) of all-inorganic halide perovskite Cs₃Bi₂I₉ are studied. The κ_L exhibits an ultralow value of ≈0.20  W m⁻¹K⁻¹ in 30–523 K temperature range. The antibonding states just below the Fermi level in the electronic structure arising from the interaction between bismuth 6s and iodine 5p orbitals, weakens the bond and causes soft elasticity in Cs₃Bi₂I₉. First-principles density functional theory (DFT) calculations reveal highly localized soft optical phonon modes originating from Cs-rattling and dynamic double octahedral distortion of 0D [Bi₂I₉]³⁻ in Cs₃Bi₂I₉. These low energy nearly flat optical phonons strongly interact with transverse acoustic modes creating an ultrashort phonon lifetime of ≈1 ps. While the presence of extended antibonding states gives rise to soft anharmonic lattice; Cs rattling provides sharp localized optical phonon modes, which altogether result in strong lattice anharmonicity and ultralow κ_L.     

Design Principles-Based Interactive Learning Tool for Solving Nonlinear Equations

Interactive learning tools can facilitate the learning process and increase student engagement, especially tools such as computer programs that are designed for human-computer interaction. Thus, this paper aims to help students learn five different methods for solving nonlinear equations using an interactive learning tool designed with common principles such as feedback, visibility, affordance, consistency, and constraints. It also compares these methods by the number of iterations and time required to display the result. This study helps students learn these methods using interactive learning tools instead of relying on traditional teaching methods. The tool is implemented using the MATLAB app and is evaluated through usability testing with two groups of users that are categorized by their level of experience with root-finding. Users with no knowledge in root-finding confirmed that they understood the root-finding concept when interacting with the designed tool. The positive results of the user evaluation showed that the tool can be recommended to other users.     

A new mixed integer linear model for selecting the best decision making units in data envelopment analysis

In a recent paper by Amin (Amin, Gholam R. (2009). Comment on finding the most efficient DMUs in DEA: An improved integrated model. Computers & Industrial Engineering, 56, 1701–1702), he proposed an improved approach to determine a single efficient DMU as the most (or the best) efficient DMU. It will be shown that this nonlinear mixed integer model may fail to produce a solution since it can be infeasible in some cases. In this paper, a linear mixed integer model is proposed which is feasible and can produce a single efficient DMU as well. The model can also be extended to rank all extreme efficient DMUs. Some properties and advantages of the model will be explained. The contents of the paper will be illustrated by some numerical examples including a real data set of nineteen facility layout alternatives.     

A miniature cell for gas solubility measurements in oils and bitumen

A miniature cell has been designed and constructed to measure gas solubility in crude oils and bitumen. The cell was made of stainless steel with a total internal volume of 1.835 cc and only an oil sample of 0.4 cc was required for one set of measurements at different pressures. By using this small cell, the waiting time for reaching equilibrium was less than 10 min. The technique was validated by measuring CO(2) gas solubility in two bitumen samples. The results were compared and found to be in very good agreement with available data. The apparatus was also used to study the effect of ashphaltene on CO(2) solubility in bitumen. It was shown that ashphaltene had a negligible effect on CO(2) solubility in bitumen.     

Specificities of proteases for use in leather manufacture

Proteases are used in leather manufacture in the processes of soaking, unhairing and bating of hides and skins. However proteases can be relatively non‐specific in their usage, and for improved efficacy of enzyme biocatalysis within the industry, an analysis of specific activities of enzymes towards skin proteins was undertaken. Most commercial proteases for soaking showed substantial activity against the substrates elastin–Congo Red and Azocoll but little or no activity against keratin–azure and hide powder black. Enzymes used for unhairing in conjunction with 30% of the usual concentration of sulfide to effect chemical unhairing showed moderate activity against all substrates tested (selected as representative of skin proteins), while proteases used in bating showed activity against Azocoll and elastin–Congo Red but had no keratinase activity and little activity against hide powder black. Bating proteases and soaking proteases displayed similar activities at pH 8. Microbes isolated in the screening of organisms from putrefied skins included one fungal and two bacterial isolates whose extracellular enzymes had efficient unhairing activity without the addition of sulfide. Enzyme activities for these proteases included high activity measured against Azocoll with little or no activity against elastin–Congo Red, keratin–azure and hide powder black. Neither elastase nor keratinase activities were determined as being essential for unhairing. Copyright © 2005 Society of Chemical Industry     

Carbon isotope effects associated with Fenton-like degradation of toluene: potential for differentiation of abiotic and biotic degradation

Hydrogen peroxide (H(2)O(2))-mediated oxygenation to enhance subsurface aerobic biodegradation is a frequently employed remediation technique. However, it may be unclear whether observed organic contaminant mass loss is caused by biodegradation or chemical oxidation via hydroxyl radicals generated during catalyzed Fenton-like reactions. Compound-specific carbon isotope analysis has the potential to discriminate between these processes. Here we report laboratory experiments demonstrating no significant carbon isotope fractionation during Fenton-like hydroxyl radical oxidation of toluene. This implies that observation of significant isotopic fractionation of toluene at a site undergoing H(2)O(2)-mediated remediation would provide direct evidence of biodegradation. We applied this approach at a field site that had undergone 27 months of H(2)O(2)-mediated subsurface oxygenation. Despite substantial decreases (>68%) in groundwater toluene concentrations carbon isotope signatures of toluene (delta(13)C(tol)) showed no significant variation (mean=-27.5+/-0.3 per thousand, n=13) over a range of concentrations from 11.1 to 669.0 mg L(-1). Given that aerobic degradation by ring attack has also been shown to result in no significant isotopic fractionation during degradation, at this site we were unable to discern the mechanism of degradation. However, such differentiation is possible at sites where aerobic degradation by methyl group attack results in significant isotopic fractionation.     

Mass transfer coefficient in the eductor liquid-liquid extraction column

In this research gasoil desalting was investigated from mass transfer point of view in an eductor liquid–liquid extraction column (eductor-LLE device). Mass transfer characteristics of the eductor-LLE device were evaluated and an empirical correlation was obtained by dimensional analysis of the dispersed phase Sherwood number. The Results showed that the overall mass transfer coefficient of the dispersed phase and extraction efficiency have been increased by increasing Sauter mean diameter (SMD) and decreasing the nozzle diameter from 2 to 1 mm, respectively. The effects of Reynolds number (Re), projection ratio (ratio of the distance between venturi throat and nozzle tip to venturi throat diameter, R_pr), venturi throat area to nozzle area ratio (R_th-n) and two phases flow rates ratio (R_Q) on the mass transfer coefficient (K) were determined. According to the results, K increase with increasing Re and R_Q and also with decreasing R_pr and R_th-n. Semi-empirical models of drop formation, rising and coalescence were compared with our proposed empirical model. It was revealed that the present model provided a relatively good fitting for the mass transfer model of drop coalescence. Moreover, experimental data were in better agreement with calculated data with AARE value of 0.085.