Challenges in Liquid‐Phase Exfoliation,Processing, and Assembly of Pristine Graphene

Recent developments in the exfoliation, dispersion, and processing of pristine graphene (i.e., non‐oxidized graphene) are described. General metrics are outlined that can be used to assess the quality and processability of various “graphene” products, as well as metrics that determine the potential for industrial scale‐up. The pristine graphene production process is categorized from a chemical engineering point of view with three key steps: i) pretreatment, ii) exfoliation, and iii) separation. How pristine graphene colloidal stability is distinct from the exfoliation step and is dependent upon graphene interactions with solvents and dispersants are extensively reviewed. Finally, the challenges and opportunities of using pristine graphene as nanofillers in polymer composites, as well as as building blocks for macrostructure assemblies are summarized in the context of large‐scale production.     

A study on the effect of polishing fluid volume in ball end magnetorheological finishing process

Ball end magnetorheological finishing is a unique process that utilizes a magnetically controlled ball of polishing fluid at the tip of the rotating tool to finish workpiece of different materials and shapes. The aim of this research is to study the effect of polishing fluid volume on finishing spot size and the surface finish associated with it. A magnetostatic simulation is done to find the variation of flux density in the working gap and on the workpiece surface. The maximum limit of the polishing fluid volume is selected on the basis of area of threshold magnetic flux density (minimum value required for finishing) region on the workpiece surface. The surface characteristics and the diameter of the finished spot are analyzed by varying the fluid volume. The surface obtained with high fluid volume is poorly finished and has scratch marks as the excess fluid flows out from the working gap and forms a thick ring at the periphery of the tool tip. Contrary to this, if the fluid volume is too less, then it merely rotates over the workpiece surface without causing any finishing action. An optimum range of fluid volume produces a good quality surface finish with constant finished spot size.     

Discrete modeling of sand–tire mixture considering grain-scale deformability

Mixing sand or soil with small pieces of tire is common practice in civil engineering applications. Although the properties of the soil are changed, it is environmentally friendly and sometimes economical. Nevertheless, the mechanical behavior of such mixtures is still not fully understood and more numerical investigations are required. This paper presents a novel approach for the modeling of sand–tire mixtures based on the discrete element method. The sand grains are represented by rigid agglomerates whereas the tire grains are represented by deformable agglomerates. The approach considers both grain shape and deformability. The micromechanical parameters of the contact law are calibrated based on experimental results from the literature. The effects of tire content and confining pressure on the stress–strain response are investigated in detail by performing numerical triaxial compression tests. The main results indicate that both strength and stiffness of the samples decrease with increasing tire content. A tire contact of 40% is identified as the boundary between rubber-like and sand-like behavior.     

Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W–Cu Composites

Tungsten is of industrial relevance due its outstanding intrinsic properties (e.g., highest melting‐point of all elements) and therefore difficult to 3D‐print by conventional methods. Here, tungsten micro‐lattices are produced by room‐temperature extrusion‐based 3D‐printing of an ink comprising WO₃–0.5%NiO submicron powders, followed by H₂‐reduction and Ni‐activated sintering. The green bodies underwent isotropic linear shrinkage of ≈50% during the thermal treatment resulting in micro‐lattices, with overall 35–60% open‐porosity, consisting of 95–100% dense W–0.5%Ni struts having ≈80–300 μm diameter. Ball‐milling the powders and inks reduced the sintering temperature needed to achieve full densification from 1400 to 1200 °C and enabled the ink to be extruded through finer nozzles (200 μm). Partial sintering of the struts is achieved when NiO is omitted from the ink, with submicron interconnected‐porosity of ≈34%. Several tungsten micro‐lattices are infiltrated with molten copper at 1300 °C under vacuum, resulting in dense, anisotropic W–Cu composites with 40–65% tungsten volume fraction. Partially sintered struts (containing nickel) with submicron open porosity are also infiltrated with Cu, resulting in co‐continuous W–Cu composites with wide W struts/Cu channels at the lattice scale (hundreds of micrometers), and fine W–Cu interpenetrating network at the strut scale (hundreds of nanometers) allowing for the design of anisotropic mechanical and electrical properties.

     

Biosynthesis of SeNPs by Mycobacterium bovis and their enhancing effect on the immune response against HBs antigens: an in vivo study

Conventional hepatitis B vaccine contains alum but is less effective to induce Th1 response. Selenium nanoparticles and Bacillus Calmette–Guerin were reported as immune modulators. In this study, SeNPs were extracted from Mycobacterium bovis and characterised. SeNPs were mixed with HBs‐Ag and administered to the mice to investigate he immune response pattern. With an addition of Se ions at a sub‐inhibitory concentration to the Sauton medium broth after 24 h, SeNPs were extracted from M. bovis and characterised by Fourier transform infrared spectroscopy, dynamic light scattering, atomic forcemicroscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, and thermogravimetric analysis. Furthermore, female inbred BALB/c mice were injected subcutaneously on the first, 14th, 28th day with 100 and 200 µg doses of that SeNPs supplemented with HBs‐Ag vaccine. Later, the total antibody, isotypes of Immunoglobulin G1, Interlukin 4, and interferon‐γ were measured by enzye‐linked immunosorbent assay. The size of the SeNPs was <150 nm. Level of total antibody and immunoglobulin G2a increased significantly in the group that received 200 µg/ml nano selenium extracted from M. bovis. SeNPs in dose of 200 µg coated with organic materials of M. bovis could induce an influential immune response in relation to the conventional HBs‐Ag vaccine.Inspec keywords: selenium, nanoparticles, nanofabrication, microorganisms, Fourier transform spectra, infrared spectra, light scattering, atomic force microscopy, X‐ray chemical analysis, transmission electron microscopy, thermal analysis, nanomedicineOther keywords: biosynthesis, selenium nanoparticles, Mycobacterium bovis, enhnced immune response, HBs antigens, Bacillus Calmette‐Guerin, immune modulators, biogenic SeNPs, immune response pattern, Sauton medium broth, Fourier transform infrared spectroscopy, dynamic light scattering, atomic force microscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, thermogravimetric analysis, female inbred BALB/c mice, antibody, IgG1 isotype, IgG2a isotype, IL₄ isotype, interferon‐γ, enzyme‐linked immunosorbent assay, bacterium, time 24 h, time 14 day, time 28 day, Se     

Tracking and Analysis of Pedestrian’s Behavior in Public Places

Crowd management becomes a global concern due to increased population in urban areas. Better management of pedestrians leads to improved use of public places. Behavior of pedestrian’s is a major factor of crowd management in public places. There are multiple applications available in this area but the challenge is open due to complexity of crowd and depends on the environment. In this paper, we have proposed a new method for pedestrian’s behavior detection. Kalman filter has been used to detect pedestrian’s using movement based approach. Next, we have performed occlusion detection and removal using region shrinking method to isolate occluded humans. Human verification is performed on each human silhouette and wavelet analysis and particle gradient motion are extracted for each silhouettes. Gray Wolf Optimizer (GWO) has been utilized to optimize feature set and then behavior classification has been performed using the Extreme Gradient (XG) Boost classifier. Performance has been evaluated using pedestrian’s data from avenue and UBI-Fight datasets, where both have different environment. The mean achieved accuracies are 91.3% and 85.14% over the Avenue and UBI-Fight datasets, respectively. These results are more accurate as compared to other existing methods.     

A Service Level Agreement Aware Online Algorithm for Virtual Machine Migration

The demand for cloud computing has increased manifold in the recent past. More specifically, on-demand computing has seen a rapid rise as organizations rely mostly on cloud service providers for their day-to-day computing needs. The cloud service provider fulfills different user requirements using virtualization - where a single physical machine can host multiple Virtual Machines. Each virtual machine potentially represents a different user environment such as operating system, programming environment, and applications. However, these cloud services use a large amount of electrical energy and produce greenhouse gases. To reduce the electricity cost and greenhouse gases, energy efficient algorithms must be designed. One specific area where energy efficient algorithms are required is virtual machine consolidation. With virtual machine consolidation, the objective is to utilize the minimum possible number of hosts to accommodate the required virtual machines, keeping in mind the service level agreement requirements. This research work formulates the virtual machine migration as an online problem and develops optimal offline and online algorithms for the single host virtual machine migration problem under a service level agreement constraint for an over-utilized host. The online algorithm is analyzed using a competitive analysis approach. In addition, an experimental analysis of the proposed algorithm on real-world data is conducted to showcase the improved performance of the proposed algorithm against the benchmark algorithms. Our proposed online algorithm consumed 25% less energy and performed 43% fewer migrations than the benchmark algorithms.     

Central Aggregator Intrusion Detection System for Denial of Service Attacks

Vehicle-to-grid technology is an emerging field that allows unused power from Electric Vehicles (EVs) to be used by the smart grid through the central aggregator. Since the central aggregator is connected to the smart grid through a wireless network, it is prone to cyber-attacks that can be detected and mitigated using an intrusion detection system. However, existing intrusion detection systems cannot be used in the vehicle-to-grid network because of the special requirements and characteristics of the vehicle-to-grid network. In this paper, the effect of denial-of-service attacks of malicious electric vehicles on the central aggregator of the vehicle-to-grid network is investigated and an intrusion detection system for the vehicle-to-grid network is proposed. The proposed system, central aggregator–intrusion detection system (CA-IDS), works as a security gateway for EVs to analyze and monitor incoming traffic for possible DoS attacks. EVs are registered with a Central Aggregator (CAG) to exchange authenticated messages, and malicious EVs are added to a blacklist for violating a set of predefined policies to limit their interaction with the CAG. A denial of service (DoS) attack is simulated at CAG in a vehicle-to-grid (V2G) network manipulating various network parameters such as transmission overhead, receiving capacity of destination, average packet size, and channel availability. The proposed system is compared with existing intrusion detection systems using different parameters such as throughput, jitter, and accuracy. The analysis shows that the proposed system has a higher throughput, lower jitter, and higher accuracy as compared to the existing schemes.     

Implementation of VLSI on Signal Processing-Based Digital Architecture Using AES Algorithm

Continuous improvements in very-large-scale integration (VLSI) technology and design software have significantly broadened the scope of digital signal processing (DSP) applications. The use of application-specific integrated circuits (ASICs) and programmable digital signal processors for many DSP applications have changed, even though new system implementations based on reconfigurable computing are becoming more complex. Adaptable platforms that combine hardware and software programmability efficiency are rapidly maturing with discrete wavelet transformation (DWT) and sophisticated computerized design techniques, which are much needed in today’s modern world. New research and commercial efforts to sustain power optimization, cost savings, and improved runtime effectiveness have been initiated as initial reconfigurable technologies have emerged. Hence, in this paper, it is proposed that the DWT method can be implemented on a field-programmable gate array in a digital architecture (FPGA-DA). We examined the effects of quantization on DWT performance in classification problems to demonstrate its reliability concerning fixed-point math implementations. The Advanced Encryption Standard (AES) algorithm for DWT learning used in this architecture is less responsive to resampling errors than the previously proposed solution in the literature using the artificial neural networks (ANN) method. By reducing hardware area by 57%, the proposed system has a higher throughput rate of 88.72%, reliability analysis of 95.5% compared to the other standard methods.     

A new method of reinforcing graphene nanoplatelets in glass/epoxy composites

This research aims to develop a method for the amalgamation of graphene nanoplatelets in glass/epoxy composites. The poor interface bonding between the fiber and matrix is critical and hinders the full performance of the composites. Glass fabric and epoxy were used as reinforcement and matrix in the composite, respectively. Graphene nanoplatelets were utilized as an additional nano-materials filler for the composites. Glass/graphene/epoxy and glass/epoxy composites were fabricated via vacuum infusion molding. The new method of applying graphene nanoplatelets as secondary reinforcement in the composite was developed based on proper functionalization in the sonication process. The physical, tensile, flexural, and short beam interlaminar properties of fabricated composites were examined to analyze the method's effectiveness. The results showed that density decreased by around 5 %; however, thickness increased by around 34 % after introducing graphene nanoplatelets into the composites. The tensile strength and modulus of the composites declined by approximately 19 %, on the other hand, flexural strength and modulus increased by around 63.3 % and 8.3 %, respectively, after the addition of graphene nanoplatelets into the composites. Moreover, interlaminar shear strength of the composite was enhanced by approximately 50 %.