Grain boundary embrittlement in Cu-AI-Niβ-phase alloys

The grain boundary embrittlement in Cu-AI-Ni-phase alloys has been investigated. The study included both the bulk alloys and rapidly solidified ribbons. It was observed that the fracture characteristics and the phase transformations in rapidly solidified ribbons were similar to those in the bulk alloys. Various factors responsible for intergranular fracture were considered. It was found that intrinsic or extrinsic precipitates at the grain boundaries are not responsible for the embrittlement. It was further observed that the segregation of impurities does not occur at the grain boundaries and hence is not a factor contributing to the embrittlement. The intrinsic characteristics, however, appear to play an important role. These may include high elastic anisotropy, ordered structure and plastic incompatibility. Severe embrittlement in high-nickel alloys is associated with spinodal decomposition occurring in these alloys. The large grain size exhibited by these alloys is found not to be a significant factor contributing to the embrittlement.     

Spin glass behaviour in the Co2−xZnxTiO4 compound

A.c. susceptibility measurements were carried out on the disordered spinel system Co_2–x Zn _x TiO₄ (0<x<1) between 10 and 80 K. Our measurements show three peaks in the versus T curve for Co₂TiO₄ and CoZnTiO₄ compounds. In both compounds two peaks are very close to each other, indicating that the Néel and semi-spin glass temperatures are very close. A third peak indicates the presence of the semi-spin glass to spin glass transition. In Co_1.5Zn_0.5TiO₄ only one peak is observed which indicates spin glass ordering at 26 K. Furthermore, the A-site canting present in Co₂TiO₄ and CoZnTiO₄ has a collinear and magnetic structure, indicating strong A-B coupling. X-ray analysis indicated that compounds of the system Co₂Zn_xTiO₄ synthesized with cubic symmetry. From transport properties it was found that the activation energy and thermoelectric coefficient decrease with increasing concentration of Zn in the system. The mobility of the system calculated from infrared measurements is typically of the order of 10^–9cm²V^–1s^–1.     

Application of vertical drainage to dewatering seacoasts

One of the most common difficulties arising when building roads and railway lines in seacoast areas is the high watertable in these regions. Among the applied dewatering methods, the most effective seems to be vertical drainage permanently lowering the level of underground water. Application of this method has also been carried out in Iraq. One should consider the fact that the vertical drainage method permits dewatering of not only the existing targets but also the areas designated for new construction. Lowering the watertable allows stabilization of the bed, and that secures stability and resistance of the foundation. The vertical drainage system depends upon underground water intake flowing to the drains from the directions of watershed in order to avoid its damming up under the building site. Dewatering according to the drainage system is much more efficient than open drain systems applied until now. From the technical point of view the system under discussion is much easier to operate, it consumes, less time and at the same time limits the number of people employed, workmen, engineers, and engineering equipment. Moreover, it has the advantage of dispensing with the expenses connected with the construction of passes and bridges, which are indispensable when the open drain ditches systems are applied. One opening of the proposed drainage may drain about 50 ha. The method is much more economical and much more efficient provided the whole drainage system is properly planned, and properly executed.     

Role of Macrophages and RhoA Pathway in Atherosclerosis

The development, progression, or stabilization of the atherosclerotic plaque depends on the pro-inflammatory and anti-inflammatory macrophages. The influx of the macrophages and the regulation of macrophage phenotype, inflammatory or anti-inflammatory, are controlled by the small GTPase RhoA and its downstream effectors. Therefore, macrophages and the components of the RhoA pathway are attractive targets for anti-atherosclerotic therapies, which would inhibit macrophage influx and inflammatory phenotype, maintain an anti-inflammatory environment, and promote tissue remodeling and repair. Here, we discuss the recent findings on the role of macrophages and RhoA pathway in the atherosclerotic plaque formation and resolution and the novel therapeutic approaches.     

Preparation and Characterization of Inorganic Organic Hybrid Material Based on TEOS/MAPTMS for Biomedical Applications

Silicon - In this study, inorganic-organic hybrid material consisting of tetraethyl orthosilicate (TEOS) and 3-methacryloxypropyl trimethoxysilane (MAPTMS) were prepared with sol-gel process and...     

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7–40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL⁻¹. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5–15.5 ppm for I–IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm² of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.     

Gurum Seeds: A Potential Source of Edible Oil

Cucurbitaceae family seeds are mostly discarded as agro-industrial wastes. Gurum (Citrullus lanatus var. colocynthoide) is an underutilized wild cucurbit plant, closely related to desert watermelon, which is grown abundantly in some African countries. Gurum seeds can play a significant role in health and nutrition due to their high oil content. This review describes the nutritional composition of gurum seeds and their oil profile. Gurum seeds are a good source of oil (27–35.5%), fiber (26–31%), crude protein (15–18%), and carbohydrates (14–17%). Gurum seeds oil is extracted by supercritical CO₂ (SFE), screw press, and solvent extraction techniques. The gurum seeds oil is composed of unsaturated fatty acids with a high proportion of linoleic acid (C18:2) and oleic acid (C18:1). Gurum seeds oil contains various bioactive compounds, such as tocopherols, phytosterols, and polyphenols. It is reported that solvent extraction gives a higher yield than the screw press and SFE, but the SFE is preferred due to safety issues. More studies are required for producing better quality gurum seeds oil by using novel extraction techniques that can increase oil yield.     

The Impact of Metastable Intermolrecular Nanocomposite Particles on Kinetic Decomposition of Heterocyclic Nitramines Using Advanced Solid‐Phase Decomposition Models

Journal of Inorganic and Organometallic Polymers and Materials - Surface oxygen of oxide catalyst has low coordination number; they are negatively charged. Surface oxygen can act active site for...     

Electrochemical behaviour of Mn3+/Mn2+, Co3+/Co2+ and Ce4+/Ce4+ redox mediators in methanesulfonic acid

The redox behaviour of Mn³⁺/Mn²⁺, Co³⁺/Co²⁺ and Ce⁴⁺/Ce³⁺ mediators commonly used in indirect oxidation of organic compounds were evaluated in methane sulfonic acid on a glassy carbon working electrode employing cyclic voltammetry. Manganic methanesulfonate exhibits higher instability in dilute methanesulfonic acid. The solid MnO₂ formed during disproportionation on the glassy carbon electrode further affects the reproducibility. Cobaltic methanesulfonate formation occurs only at oxygen evolution region rendering the overall oxidation process less efficient. Ceric methane sulfonate formation is highly efficient over a wide acid concentration range. Ceric methanesulfonate can also be employed over a wide temperature range to oxidize different aromatic compounds.     

An improved light attenuation technique for measuring large interfacial areas

A laser-based light attenuation technique was successfully used to measure interfacial areas as high as 5832 m²/m³ and Sauter mean bubble diameter varying between 50 and 5600 μm. Good agreement between this approach and the photographic technique was obtained particularly at low gas holdups.