An analytical model for high electron mobility transistors

In this paper we present a new model for HEMT's which is based on a single analytical function that describes the electron concentrations in the two dimensional electron gas and in the AlGaAs layer. Besides accounting for the AlGaAs conduction, the model includes the effect of mobility degradation, channel length modulation in the saturation region and the series resistances R_S and R_D. The model results in closed form expressions for the current, transconductance, output conductance and gate capacitance. Finally, the theoretical predictions of the model are compared with the experimental data and shown to be in good agreement over a wide range of bias conditions     

Over GHz electrical circuit model of a high-density multiple line grid array (MLGA) interposer

The multiple line grid array (MLGA) interposer was recently introduced as a future high-density high-speed bonding method. In this paper, we introduce an electrical model and high-frequency characteristics of the MLGA interposer. The high-frequency electrical model was extracted from microwave S-parameter measurements up to 20 GHz as well as from fundamental microwave network analysis. For the parameter fitting process during model extraction, an optimization method was used. Several different types of MLGA interposers were designed, assembled and tested. The test vehicles contained coplanar waveguides, probing pads and an MLGA interposer structure. The height of the MLGA, the conductor shape inside the MLGA, and the dielectric insulator of the MLGA were varied. From the model, an MLGA with a height of 0.4 mm and a polymer dielectric insulator was found to have 203 pH of self inductance, 49 pH of mutual inductance with the nearest ground conductor line, and 186 fF of mutual capacitance. By reducing the height of the MLGA and by using an insulator with a lower dielectric constant, parasitic inductance and capacitance is further reduced. TDR/TDT simulation and measurement showed the validity of the extracted model parameters of the MLGA interposer. Circuit simulation based on the extracted model revealed that the MLGA interposer could be successfully used for microwave device packages up to 20 GHz and for high-speed digital device packages with a clock cycle up to 5 GHz.     

Effects of potential and heat treatment on phase transition of alumina dielectric layer

The characteristics and growth behaviors of alumina dielectric layer formed by anodic oxidation were investigated. The aluminum oxide layer anodized at 400 V was predominantly amorphous alumina, but at the applied potentials more than 500 V, amorphous and crystalline γ-alumina were existed in anodic oxide layer and the ratio of γ-alumina increased with the increasing applied potential. During the heat treatment at 600^°C or higher temperature, amorphous alumina layer was transformed into the crystalline γ-alumina. The phase transition of anodic amorphous alumina into crystalline depends on anodic applied potentials and heat-treatment temperatures.     

Nanoporous activated carbon cloth for capacitive deionization of aqueous solution

Activated nanostructured-carbon cloths with a high ratio of surface area to volume are used as electrode for capacitive deionization. The electrochemical properties on capacitive deionization for NaCl solution have been investigated to improve efficiency of capacitive deionization properties from aqueous solution, employing chemical surface-modification by etching in alkaline and acidic solution. The removal efficiency of inorganic salts of activated carbon cloths by chemical modification significantly increased. Specially the carbon cloth surface modified in HNO₃ showed an effect of improvement in the CDI efficiency due to not only ion adsorption by an electric double layer, but also electron transfer by Faradaic reaction.     

Analysis of hazard area associated with hydrogen gas transmission pipelines

Hydrogen is considered to be the most important future energy carrier in many applications reducing significantly greenhouse gas emissions, but the safety issues associated with hydrogen applications need to be investigated and fully understood to be applicable as the carrier. Generally, the locations of hydrogen production and consumption are different. Hydrogen must be transported from the point of production to the point of use. Pipeline delivery is cheaper than all other methods for large quantities of hydrogen. The rupture of a hydrogen pipeline can lead to outcomes that can pose a significant threat to people and property in the immediate vicinity of the failure point. In this work, a simplified equation of hazard analysis is proposed for the pipeline transporting hydrogen, which relates the diameter, the operating pressure and the length of the pipeline to the size of the affected area in the event of a failure of the pipeline. The dominant hazards are thermal radiation from sustained fire and shock pressure from gas cloud explosion. For a transmission pipeline of hydrogen gas, the hazard area from the fire is slightly larger than by the other event. The hazard area is directly proportional to the operating pressure raised to the power one-half, and to the pipeline diameter. This simplified equation to estimate the hazard area will be a useful tool for safety management of hydrogen gas transmission pipelines.     

Effects of forage level and canola seed supplementation on site and extent of digestion of organic matter, carbohydrates, and energy by steers

The objective of this study was to determine the effects of fat supplementation from canola seed (CS) on ruminal fermentation and postruminal digestion of OM, carbohydrates, and energy of diets containing different levels of forage. Six ruminally and duodenally cannulated beef steers (354 kg +/- 18) were given ad libitum access to six isonitrogenous diets that were offered twice daily in a 6 x 6 Latin square design. Treatments were arranged as a 2 x 3 factorial with two forage levels (70 vs 30% of dietary DM as corn silage) and three forms of CS supplementation including no CS or CS added at 10% of dietary DM as whole CS treated with alkaline hydrogen peroxide or untreated crushed CS. Fat from CS provided 5% of dietary DM. The remaining dietary ingredients were corn, canola meal, molasses, and urea. No interactions (P > .05) between dietary forage level and CS supplementation were observed for ruminal characteristics or digestion of OM, carbohydrates, and energy in the rumen, postruminally, or in the total tract. Fat supplementation from CS did not affect (P > .05) DMI. With few exceptions, fat supplementation did not affect (P > .05) ruminal, postruminal, or total tract digestibilities of OM, structural and nonstructural carbohydrates, and GE. Ruminal disappearance of GE was decreased (P < .05) when diets were supplemented with fat from whole treated CS, and total tract digestibilities of OM and GE were decreased (P < .05) when diets were supplemented with fat from CS in either form. Ruminal pH, concentrations of NH3 N and total VFA, and molar proportions of acetate, propionate, and butyrate were not affected (P > .05) by fat supplementation. Results suggest that fat supplementation from CS (at 5% of dietary DM) as whole treated or untreated crushed had no negative effects on ruminal fermentation of OM, carbohydrates, or energy when steers were given ad libitum access to diets containing high or low forage.     

Transluminal balloon angioplasty, stents, and atherectomy

Arterial bypass grafting for occlusive disease is still considered the gold standard in the treatment of arterial occlusive disease. However, less invasive methods are available for select patients. Percutaneous balloon angioplasty has been shown to be effective in focal iliac artery stenosis, with patency rates of 50% to 90% at 5 years. Patency rates for femoropopliteal lesions are generally less than 50% at 2 years. Complications seen with balloon angioplasty often can be treated with arterial stents. Stents can be categorized into balloon-expandable, which provide a rigid scaffold to support the artery, self-expanding, which exert radial force to resist external compression, and thermal expanding stents, which allow for the use of a smaller introducer sheath. Another treatment option is atherectomy, in which the offending lesion is removed instead of fracturing and dilating the lumen. Although overall initial results of atherectomy have not been favorable, short lesions with eccentric atheroma or intimal hyperplasia, such as those seen in dialysis access fistulas or vein graft stenoses, may respond well.