水乳型丙烯酸酯建筑防水胶的研制(Ⅱ)

摘 要 研究水乳型丙烯酸酯建筑防水胶与水泥的配比及共混性能、共混固化物胶膜的力学性能、耐冷热性能及老化性能。     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

Electrorheological Fluids Based on Titania Particles Coated with Silica and Their Application in Smart Windows

The electrorheological (ER) fluids are colloidal suspension of highly polarizable particles in a non-conducting solvent.Chains of submicron-sized particles formed along an applied DC electric field by the so-called electrorheological effect.According to the obvious change of transmittance of the ER fluids in a DC electric field when the polarized particles arranged along the field,the model of smart window was proposed by sandwiching the ER fluids based on titania particles coated with silica between a pair of In-Sn oxide (ITO) coated glasses.The solar transmittance change as much as 48.0% was obtained with the wavelength of 500 nm at the maximum on applying and removing the electric field of 500V/mm.     

纳米氧化铝的制备及应用

介绍了高科技产品纳米氧化铝的 3大制备方法 :固相法、气相法、液相法的优缺点 ,以及纳米氧化铝的应用与发展前景     

液相色谱法测定萘普生中间体1-(6-甲氧基-2-萘基)乙醇

建立了萘普生中间体 1 (6 甲氧基 2 萘基 )乙醇的高效液相色谱分析方法。流动相 :甲醇 +水 =80 + 2 0 (v/v ) ,在C18柱上UV 2 38nm下测定其含量 ,方法精密度为 0 19,变异系数为 0 2 7% ,回收率在 98 5 %～ 10 0 4 %之间     

微分代数方程的一类并行算法

本文提出求解微分代数方程的一类并行算法,进行误差估计。对于一个模型问题进行稳定性分析,画出稳定区域。计算实例表明算法是有效的。     

光学全交叉网络与SW榕树（F＝S＝2）网络拓扑等价的多样性

本文对有关互连网络拓扑等价的分析方法作了简单评述。并采用互连网络拓扑等价的图分析法分析了自由空间光学互连全交叉网络与ＳＷ榕树网络的拓扑等价及其多样性，拓展了全交叉网络在数字光计算、光子交换及多处理机系统的潜在应用。     

缓冲层对氮化镓二维生长的影响

报道了在射频等离子体（RF-Plasma)辅助的分子束外延（MBE）技术中，使用白宝石（0001）衬底，采用低温缓冲层工艺外延氮化镓（GaN)。通过原子力显微镜（AFM）的表面形貌比较及X射线双晶衍射（XRD）ω扫描摇摆曲线的分析，讨论了低温缓冲层成核机理及缓冲层生长温度与形成准二维生长的关系，确立了缓冲层的三维成核，准二维生长的生长机理，并在此基础上实现了氮化镓外延层更好地二维生长，进一步提高了氮化镓外延层的晶体质量。     

高海拔长日低温条件下选择水稻光温敏核不育系的效果和方法研究

在高海拔长日低温、低海拔日高温、低海拔长日高温和人工气候室长光低温条件下，进行了光温敏不育水稻分离世代的不育株出现频率以及选择实用型不育系的效果和选择方法的研究。     

两种自主开发的图形外延SiGe工艺

使用清华大学微电子学研究所研发的UHV/CVD系统深入研究了图形外延SiGe工艺,分别选用单一的SiO2介质层和SiO2/P0ly-Si复合介质层,作为图形外延SiGe单晶材料的窗口屏蔽介质,开发出了不同的实用化图形外延SiGe工艺.