Structural and electrochemical characterization of mechanochemically synthesized calcium zincate as rechargeable anodic materials

Hydrated calcium zincate was synthesized by mechanical ball milling of ZnO and Ca(OH)₂ in water at room temperature. The structural and electrochemical properties of this material used as rechargeable anodic material were examined by microelectrode voltammetry, charge–discharge measurements and structural analysis. The results showed that during mechanical milling, ZnO, Ca(OH)₂ and H₂O reacted rapidly to form Ca[Zn(OH)₃]₂ · 2H₂O which was subsequently transformed to a stable structure CaZn₂(OH)₆ · 2H₂O. Since this composite oxide has lower solubility in KOH solution (<35 wt %) and better electrochemical reversibility than ZnO-based negative materials, the zinc anodes using this material can overcome the problems of shape changes and dendritc formation, and therefore exhibit improved cycling life.     

分离机械在金隆公司废酸处理中的应用

介绍375kt/a铜冶炼烟气制酸装置废酸处理系统的分离机械－－石膏脱水离心机，铜、砷滤饼压滤机和硫酸中和渣回转真空过滤机。对使用过程出现的主要故障进行分析，提出相应的解决办法。     

脲醛树脂微胶囊包覆红磷阻燃剂制备工艺的研究 Ⅰ.预聚物合成工艺研究

研究了脲醛树脂的预聚物通过原位聚合对红磷进行包覆的一些影响因素。实验表明影响预聚物质量的主要因素是第一阶段尿醛比(F/U)1,第二阶段尿醛比(F/U)2,反应温度和pH值。制备预聚物的最佳条件为:第一阶段尿醛比为2.3∶1(摩尔比),第二阶段尿醛比为1.3∶1(摩尔比),pH值为5.1,反应温度为75℃。制备的预聚物来包覆红磷,颜色为白色;用微胶囊红磷阻燃聚乙烯,当含量为9%时,在500℃下残余物为4.85%。     

对苯二胺生产工艺条件的研究

对以铁 盐酸为还原体系 ,由对硝基苯胺制取对苯二胺的工艺条件进行了研究 ,研究了各种工艺条件如反应的配料、pH、温度、升华条件等对产率和产品质量的影响 ,获得了最佳的合成工艺。实验表明 :还原反应的反应温度在 95℃～ 10 5℃、pH为 3～ 4时 ,产率在 70 %以上 ;减压升华时油浴温度在 2 4 0℃ ,真空度为0 0 5MPa ,升华气相温度为 5 5℃～ 6 5℃时 ,产品的质量和白度达标     

超高密度磁记录的课题与展望

介绍了超高密度记录的研究开发状况 ,论述了垂直磁记录技术的课题以及采用TMR磁头的、记录密度为Subterabit in2 的记录 读出特性。作为高密度记录所必需的头 盘界面技术 ,提出了接触记录技术的课题 ,还就STM (Scanningtunnelingmicroscopy)存储器论述了未来超高密度技术     

Effects of sulfate-reducing bacteria on the corrosion behavior of carbon steel

The influences of the growing process of sulfate-reducing bacteria (SRB) in seawater system on the medium state and corrosion behavior of carbon steel were studied by detecting solution state parameters and using corrosion electrochemical methods. The growing process of SRB in the seawater shows the three stages of growing, death and residual phases. The solution state parameters of the concentration of sulfide, the pH value and the redox potential changed during the three stages of the SRB growing process. And the corrosion rate of D36 carbon steel was accelerated during the growing phase and stable during the death and residual phases. The results indicate that the medium state and the corrosion rate of the steel do not depend on the number of active SRB, but depend on the accumulation of the metabolism products of SRB.     

2,6-二氟苯甲酸合成工艺研究

为优化2,6-二氟苯甲酸(DFBA)的合成工艺,以2,6-二氯苯腈(DCBN)和氟化钾为原料,N,N-二甲基酰胺(DMF)为溶剂,在聚醚类催化剂A的催化下氟代合成中间体2,6-二氟苯腈,然后中间体在碱性条件下水解制得(DFBA).试验结果表明,合成DFBN的最佳条件为:DCBN在DMF中的质量浓度为0.38g/mL,KF的量为DCBN的量的2.3～2.4倍,反应时间10 h,最高收率93.5%;合成DFBA时,以质量分数为20%的NaOH为介质,反应时间9 h,收率≥92%.收率93.5%,纯度99.7%.该工艺收率高、三废排放少,可节省成本,有望工业推广.     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

铝电解电容器用新型宽温高压工作电解液

采用异癸二酸铵为主溶质,乙二醇和γ-丁内酯为复合溶剂,制备新型宽温(-40~105℃)、高压(400 V)铝电解电容器工作电解液,并检测了该电解液和用该电解液生产的电解电容器的性能。测试结果表明,该工作电解液25℃时电导率达到1.6 mS/cm,闪火电压为480 V,-40℃下未见晶体析出;CD 110/400 V铝电解电容器试样的漏电流≤10μA,损耗0.03,容量变化率只有-3%。经过105℃高温贮存250 h后各项电气性能不仅优于国家标准,而且能达到严格的企业标准。     

国产MB-86催化剂使用情况分析

抚顺引进的５００００ｔ／ｙ丙烯腈装置要改造到７００００ｔ／ｙ的生产能力，其中更换国产催化剂ＭＢ－８６是较为关键的一步，文章对此进行了总结与分析。