Shear-induced crystallization of poly(phenylene sulfide)

The crystalline morphology of poly(phenylene sulfide) (PPS) isothermally crystallized from the melt under shear has been observed by polarized optical microscope (POM) equipped with a CSS450 hot-stage. The shish–kebab-like fibrillar crystal structure is formed at a higher shear rate or for a longer shear time, which is ascribed to the tight aggregation of numerous oriented nuclei in the direction of shear. The crystallization induction time of PPS decreases with the shear time, indicating that the shear accelerates the formation of stable crystal nuclei. Under shear, the increase of spherulite growth rate results from highly oriented chains. The melting behavior of shear-induced crystallized PPS performed by differential scanning calorimetry (DSC) shows multiple melting peaks. The lower melting peak corresponds to melting of imperfect crystal, and the degree of crystal perfection decreases as the shear rate increases. The higher melting peak is related to the orientation of molecular chains. These oriented molecular chains form the orientation nuclei which have higher thermal stability than the kebab-like lamellae that are developed later. A new model based on the above observation has been proposed to explain the mechanism of shish–kebab-like fibrillar crystal formation under shear flow.     

宝钢曲轴用非调质钢的生产与展望

在实验室研究的基础上，开发了屈服强度为520MPa级的曲轴用微合金化非调质钢48MnV。工业生产了6000余吨φ151mm大规格圆钢，其各项性能满足了用户要求。指出了宝钢曲轴用非调质钢开发和努力的方向。     

Al2O3/TiB2/SiCw三元复合材料的力学性能及显微结构

以Al₂O₃为基体,SiC晶须和TiB₂颗粒两种增韧剂,采用热压烧结工艺制备了Al₂O₃/TiB₂/SiC_w三元复合陶瓷材料。研究了热压工艺参数对材料致密度的影响和晶须含量对该复合材料的力学性能和显微结构的影响。结果表明;随晶须含量的增加,该复合材料的热压温度和保温时间需要相应的增加;晶须拔出、裂纹偏转和晶须的桥接为该复合材料的主要增韧机理;随晶须含量的增加,该材料的室温断裂韧性增加;该材料的断裂韧性随温度的升高而呈增大趋势,并且晶须含量越高,材料的高温断裂韧性增幅越大。     

60MHz相位介电测井仪模拟刻度器设计

文章以介电测井理论为基础，借鉴感应仪的模拟刻度方法，对大庆油田的６０ＭＨｚ相位介电井仪的模拟刻度进行了研究。参照国内外有关资料，提出了模拟刻度器的设计模型，通过理论分析与计算，建立了一套模拟刻度方法。现场初步试验，该方法取得了一定物效果，为进一步提高仪器的测量精度提供了依据。     

Titania NOx sensors for exhaust monitoring

Oxide semiconductors have been examined to develop NO_x sensors for exhaust monitoring. Titania doped with trivalent elements, such as Al³⁺, Sc³⁺, Ga³⁺ or In³⁺, has a good sensitivity and selectivity to NO between 450 and 550 °C, and shows rapid response. A sensor probe for monitoring exhaust NO_x has been fabricated. Many kinds of interference gases, such as C₃H₆, CO and SO₂, have been found to have only a slight influence on the sensor response to NO. The influence of O₂ and H₂O is also negligible, except for the cases of 0% H₂O and fuel-rich conditions. In accordance with these results, the sensor probe operates satisfactority in the exhaust gas of various combustion conditions without interference from the various kinds of gas species in the exhaust gases.     

强化管理提高特超稠油开发效果

河南稠油资源品位低,开采难度大,效益差。近几年,通过实践,逐渐摸索出一套适应开发需要的科学生产管理方法,明显地改善了稠油开发效果。以提高热效率为核心,形成了八大生产管理制度;深化油藏认识,使油藏-工艺-管理三者有机结合,充分利用了地层储热,提高了周期吞吐开发水平;以降粘、防砂、堵窜为重点,实现了地面-井筒-油层三位一体工艺配套,保证了油井正常生产。     

用于虚拟现实的360度视频编码技术新进展*

随着虚拟现实技术不断发展,360度视频编码开始成为研究热点。应用于虚拟现实的360度视频与传统的视频相比分辨率更高,编码数据量更大,在实际应用中面临传输带宽有限的瓶颈,编码效率问题有待解决。归纳分析了国际标准组织联合视频研究组（joint video exploration team, JVET）正在制定的360度视频编码投影变换技术及其编码优化方法,综合对比了各变换技术的编码性能。根据当前最新研究成果,对下一步研究需要解决的问题进行了探讨总结,给出未来的研究方向和思路。     

Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries

Based on the voltammetric behaviour of a series of methyl-substituted benzenes in 1M LiPF₆/EC-DMC electrolyte, xylene was selected and tested as an electrolyte additive for overcharge protection of Li-ion batteries. From the overcharge curves, CV behaviour and SEM observations of the cells in the presence of xylene, it was found that the additive can polymerize at the overcharged voltage to form a dense layer of isolating polymer film at the cathode surface, which blocks off further oxidation of the electroactive material and electrolyte and, therefore, improves the overcharge tolerance of the Li-ion battery. In addition, the xylene additive has shown only a slight influence on the cycling behaviour.     

基于数据密度的半监督自训练分类算法

在实际的分类任务中,无标记样本数量充足而有标记样本数量稀少的情况经常出现,目前处理这种情况的常用方法是半监督自训练分类算法。提出了一种基于数据密度的半监督自训练分类算法,该算法首先依据数据的密度对数据集进行划分,从而确定数据的空间结构;然后再按照数据的空间结构对分类器进行自训练的迭代,最终得到一个新的分类器。在UCI中6个数据集上的实验结果表明,与三种监督学习算法以及其分别对应的自训练版本相比,提出的算法分类效果更好。     

Affordances of social media in collective action: the case of Free Lunch for Children in China

This paper studies the socialised affordances of social media in the processes of collective action, exploring the role of technology in the under‐researched area of civil society. We examine the case of Free Lunch for Children (FL4C), a charitable programme in China based on the microblogging platform, Weibo. Adopting the perspective of affordances‐for‐practice, we draw upon the collective action model to better understand the sociomaterial practices and social processes involving social media, and seek to address the ‘when’ and ‘how’ questions of affordances. The study generates theoretical and practical implications for understanding the role of social media in social transformation.