凸非球面补偿检验的工艺球面分析解

本文从三级像差理论出发,推导了几种工艺球面检验凸二次曲面的计算公式。根据这些公式计算结果,进行了光路追迹,给出了这些公式对凸二次曲面的补偿范围;并讨论了几种特殊情况下的平面解。     

10Gbit/S以太网,RPR和MPLS协同工作:城域网的未来

随着数据业务的发展,目前在城域网领域出现了3种很有希望的新技术:MPLS(多协议标记交换)、10 Gbit/s以太网和弹性分组环(RPR).这三种技术都各自有着自己的特点和优点,然而仅仅采用某一项技术并不能解决网络中的全部问题,将这三种技术综合应用就成为一种必要,本文将简要分析这几种技术,及其它们综合起来协同工作的必要性和现实意义.     

转子系统热膨胀状态下固有横振频率

把转子的惯性力看成作用在轴上的外力,采用新的非线性渐近法研究热膨胀对转子系统固有横振频率的影响.     

The orientation dependence of fatigue-crack growth in 8090 Al-Li plate

A series of fatigue-crack growth rate (FCGR) tests was carried out on 8090 Al-Li plate to examine the effects of specimen orientation on fatigue-crack growth. The directionality of fatigue fracture behavior is found to be related to the strong {110}〈112〉 texture in this alloy. Based on a previously developed transgranular FCGR model using restricted slip reversibility (RSR) concepts, [1] a mechanistic model is developed for transgranular fatigue-crack growth in highly textured materials. The model takes the form of the Paris relationship with a power law exponent of 3, and the material texture is shown to strongly influence the proportional factor. The effect of texture on FCGR is related through a geometric factor cos² ϕ, where ϕ defines the angle between the load axis and the normal of the favorable slip plane. The effect of specimen orientation on FCGR in 8090 Al-Li alloy is shown to be related to a combination of its anisotropic mechanical properties and the variation of angleϕ with specimen orientation. The model further predicts that fatigue-crack growth rates will be slower in many textured materials than texturefree materials becauseϕ > 0 and cos₂ ϕ < 1.     

The impact of SONET digital cross-connect system architecture ondistributed restoration

The viability of distributed control restoration using digital cross-connect systems (DCS) depends on its capability for restoring services within specified time requirements, and its economics for providing restoration compared to other alternatives. The authors report a Bellcore study for the impact of the DCS architecture on distributed restoration. This study concludes that currently proposed distributed control DCS self-healing schemes may not meet the 2 second restoration objective for large metropolitan local exchange carrier's networks, regardless of the distributed algorithm used, if the present DCS system architecture which uses serial message processing and serial path cross-connection remains unchanged. They also discuss several DCS architecture enhancement options, including a parallel processing/cross-connect DCS architecture, which may improve the service restoration time     

Design considerations for Rowland circle gratings used in photonicintegrated devices for WDM applications

Design issues of photonic integrated devices for WDM applications based on Rowland circle gratings have been studied. Effects of grating period, diffraction order, grating aperture (size), and Rowland circle size on device performance are discussed. The point spread function of a typical Rowland circle grating is evaluated numerically which yields an optical image (spot) size of several microns in diameter. Our study shows that there is a tradeoff between channel dispersion and feedback efficiency in choosing the grating period when a Rowland circle grating is used as the wavelength-selective element for a parallel-waveguide-type wavelength division multiplexing device     

Ti-23Al-14Nb-3V合金氩弧焊接头的显微组织及其力学性能

研究了预热对Ｔｉ－２３Ａｌ－１４Ｎｂ－３Ｖ合金焊接性，特别是对消除氩弧焊冷裂纹的作用以及对接头显微组织和力学性能的影响。结果表明，焊前预热可有效降低该合金的冷裂倾向。经预热处理后，焊缝区的结晶层状线消失，热影响区的硬度峰得到缓和，整个焊缝的显微硬度分布趋于均匀，但焊缝区的枝晶发生粗化，热影响区有所扩大。焊件接头的拉伸试验表明，预热可使焊缝区的接头强度系数增加，但无论预热与否，接头强度均低于母材强度，且不显示宏观塑性。     

Design of a product quality control system based on the use of data mining techniques

In recent years industries have increasingly used customer relationship labor in management as a tool to improve their position in the marketplace. This research involves using a data warehouse, decision-tree-based data mining, and neural network pattern classification analysis to isolate the causes of non-conformity in IC packaging. The correctness of the classification analysis produced using the two methods is compared. Our objective is to establish an information analysis system, that is able to quickly identify the causes of problems thereby reducing the time taken to solve quality-related problems. It is shown that predictions made about the target group using decision tree analysis are more accurate than those made by neural network classification, indicating that decision tree analysis is an effective means of classification analysis of a company's quality problems.     

Dynamic properties of carbon black filled chlorinated polyethylene/hindered phenol blends

Aggregates of carbon black (CB) in a polymer matrix have a tendency to form a CB network. The dynamic mechanical properties of binary systems of chlorinated polyethylene (CPE) and CB or 3,9‐bis{1,1‐dimethyl‐2[β‐(3‐tert‐butyl‐4‐hydroxy‐5‐methylphenyl)propionyloxy]ethyl}‐2,4,8,10‐tetraoxaspiro[5,5]‐undecane (AO‐80) and their ternary systems were investigated. It was found that the dynamic mechanical properties of those systems depend on the colloidal properties, surface oxides, and surface modification of CB. For binary systems of CPE and CB, oxidized CB gives a high modulus at low strain amplitude and a large Payne effect compared with untreated CB. In contrast, the reverse effect was observed for their ternary systems. Consequently, a good micro‐dispersion is obtainable by surface modification due to physical adsorption of AO‐80 on oxidized CB particles via hydrogen bonds. © 2003 Society of Chemical Industry