The material properties of sulphonated phenolic resin reinforced cement mortars

The material properties of new sulphonated phenolic resin (SP) reinforced cement mortars have been investigated. SP was found to promote the dispersion of cement particles and to interact with Ca(OH)₂. As a result, the resulting mortars exhibit better workability, more compact structure and higher compressive strength than plain mortars. The mortar with 1 wt% SP present after 28 days curing exhibits a compressive strength of 66MPa, which is about 18% higher than that of plain mortar.     

Transition metal joints for steam generators—An overview

The transition metal joint (TMJ) between an austenitic stainless steel and a chromium-molybdenum (Cr-Mo) ferritic steel used widely in steam generators of power plants has for a long time presented problems relating to premature failures in service. The direct (bimetallic) TMJ presently in use is designed for a service life of about 200,000 h; but such TMJs with iron-base weld metals have been failing in service within about one-third of their design lifetime, while their counterparts with nickel-base weld metals fail within about one-half of their design lifetime. The causes for such premature service failures of these TMJs are discussed in detail, leading to the development of improved TMJs. One of the improved TMJs with a trimetallic configuration of austenitic stainless steel/Alloy 800/Cr-Mo ferritic steel is discussed in detail, covering its development, characterisation and evaluation. Accelerated performance tests in the laboratory have indicated a four-fold improvement in the service life of the TMJ with this trimetallic configuration compared to the bimetallic configuration. The metallurgical details of these studies are also discussed in this paper.     

Reaction of phosphorus with iron,cobalt, nickel,and manganese on heating

X-ray phase, differential thermal, and metallographic analyses are used to study the reaction of phosphorus with Fe, Co, Ni, and Mn on heating in an inert atmosphere. It is found that low-temperature endo- and exothermic effects are related to formation of Fe₃P, Co₂P, Ni₃P, and Mn₃P. The effect of eutectic contact melting on the metal-phosphide interface is observed in all specimens.     

Effects of magnesium sulfate and lidocaine in the treatment of ventricular arrhythmias in experimental amitriptyline poisoning in the rat

OBJECTIVES: Amitriptyline poisoning is associated with ventricular arrhythmias. Standard treatment is sodium bicarbonate but further intervention may be necessary. The present study compared the actions of lidocaine and magnesium sulfate on ventricular tachycardia induced by amitriptyline. DESIGN: Nonrandomized, controlled, intervention trial. SETTING: University laboratory. SUBJECTS: Thirty male Wistar rats anesthetized with pentobarbital and mechanically ventilated. INTERVENTIONS: After pretreatment with norepinephrine, the animals were subjected to a continuous infusion of amitriptyline. After the appearance of ventricular tachycardia, they were treated with magnesium sulfate (45 mg/kg + 15 mg/kg/min) or lidocaine (1 mg/kg + 0.5 mg/kg/min) or glucose infusion as a control. MEASUREMENTS AND MAIN RESULTS: In the group treated with magnesium sulfate, electrocardiogram tracings demonstrated that nine of ten animals converted from ventricular tachycardia to sinus rhythm compared with one of ten in both the lidocaine- and glucose-treated groups (p < .001). The animals treated with magnesium sulfate also had a significantly longer total time in sinus rhythm (10.0 +/- 1.6 mins) than those rats treated with lidocaine (1.7 +/- 1.5 mins) or glucose (1.5 +/- 1.5 mins). Magnesium sulfate significantly decreased blood pressure and heart rate, but no severe hemodynamic side effects were observed. CONCLUSIONS: Magnesium sulfate is effective in converting ventricular tachycardia in hyperadrenergic amitriptyline poisoning. In contrast, lidocaine had no effect on arrhythmias.     

A hybrid wafer-dicing process for GaAs MMIC production

A dicing process for GaAs MMIC (monolithic microwave integrated circuit) wafers using spin-on wax for wafer mounting and a hybrid process of wet chemical etching/mechanical sawing for chip dicing is described. This process minimizes ragged chip edges and reduces generation of microcracks in addition to the elimination of the plated gold burrs on the backside of the diced MMIC chips. This process gives a uniformity of -3 μm across a 2-in wafer following the completion of the whole backside process. This GaAs chip dicing technique is amenable to production because it exhibits both a very high chip yield (>90%) and nearly flawless edges     

Dynamic arrays for fast, efficient, data manipulation during image analysis: a new software tool for exploratory data analysis.

Memory reallocation is used to construct a run-time data structure for fast/efficient storage of information during collection and analysis. The data structure presented uses dynamic memory but does not require the use of pointers to link nodes of information together. It allows for simple and efficient access to data via array indexing rather than through the use of lists or tree structures and it provides flexibility for competing storage requirements that are determined dynamically. The data structure is developed in the C programming language and a suite of ANSI standard C subroutines that make up a run-time data structure management system is provided.     

METEOR: a constraint-based FIR filter design program

It is proposed to specify a filter only in terms of upper and lower limits on the response, find the shortest filter length which allows these constraints to be met, and then find a filter of that order which is farthest from the upper and lower constraint boundaries in a minimax sense. The simplex algorithm for linear programming is used to find a best linear-phase FIR filter of minimum length, as well as to find the minimum feasible length itself. The simplex algorithm, while much slower than exchange algorithms, also allows the incorporation of more general kinds of constraints, such as concavity constraints (which can be used to achieve very flat magnitude characteristics). Examples are given to illustrate how the proposed and common approaches differ, and how the proposed approach can be used to design filters with flat passbands, filters which meet point constraints, minimum phase filters, and bandpass filters with controlled transition band behavior     

A novel technique for fabrication of metallic structures on polyimide by selective electroless copper plating using ion implantation

The successful use of palladium ion implantation into polyimide to seed an electroless plated film of copper on the polyimide surface is reported. Polyimide (Hitachi PIX 3400) was implanted with palladium ions to doses of 1.5 × 10¹⁵ − 1.2 × 10¹⁷ ions cm⁻² using a MEVVA ion implanter. The implanted ions acted as sites for nucleation of copper film. A copper film was then deposited on implanted polyimide using a commercial electroless plating solution. The ion energy was kept low enough to facilitate a low critical ‘seed’ threshold dose that was measured to be 3.6× 10¹⁶ Pd ions cm⁻². Test patterns were made using polyimide to study the adaptability of this technique to form thick structures. Plated films were studied with optical microscopy, Rutherford Backscattering Spectrometry (RBS) and Profilometry. The adhesion of films was qualitatively assessed by a ‘scotch tape test’. The film growth (thickness) was observed to be linear with plating time. A higher implantation dose led to greater plating rates. The adhesion was found to improve with increasing dose.