Analysis of momentum adaptive filtering algorithms

This article analyzes the momentum LMS algorithm and other momentum algorithms using asymptotic techniques that provide information regarding the almost sure behavior of the parameter estimates and their asymptotic distribution. The analysis does not make any assumptions on the autocorrelation function of the input process     

Issues and trends in router design

Future routers must not only forward packets at high speeds, but also deal with nontrivial issues such as scheduling support for differential services, heterogeneous link technologies, and backward compatibility with a wide range of packet formats and routing protocols. The authors outline the design issues facing the next generation of backbone, enterprise, and access routers. The authors also present a survey of advances in router design, identifying important trends, concluding with a selection of open issues     

Zinc diffusion in tellurium doped gallium antimonide

Zinc diffusion into tellurium doped gallium antimonide, GaSb, has been carried out as a function of time, temperature, and antimony over-pressure. Total zinc profiles as well as carrier concentration profiles have been measured. Results favor a substitutional-interstitial vacancy (Frank-Turnbull)¹ or kick-out (Gösele-Morehead)² mechanism, although there is insufficient evidence to conclusively distinguish between them. There is also an inverse dependence of the diffusivity on antimony over-pressure, this is discussed in terms of zinc diffusion superimposed on gallium vacancy diffusion. Tellurium doping seems to have little effect on the diffusion because of its low level in comparison to that of zinc. Furthermore, at high zinc concentrations, the profiles indicate an additional component associated with a non-electrically active zinc species which has a small, strongly temperature dependent diffusion coefficient.     

Equivalent refractive index of MQW waveguides

In this paper, we have proposed some new numerical and semi-analytical methods for developing an equivalent three-layer model of an MQW waveguide. The waveguiding properties like effective index, field distribution, and fractional power within the core of the waveguide of these equivalent structures are compared with those of previously reported equivalent methods. These results are also compared with the results obtained from the exact multilayer analysis of the MQW waveguide. The waveguiding properties are accurately predicted by the semi-analytical method using variational analysis, and the computational effort is significantly reduced. The use of the three-layer equivalent is illustrated in obtaining an estimation of the waveguide losses and is used to study the effect of nonlinearity     

Capacity enhancement of cellular CDMA by traffic-based control ofspeech bit rate

Variable rate speech coding is now recognized as an important system component for high-capacity cellular networks because it exploits speech statistics to reduce the average bit rate, which results in reduced interference and increased capacity. Once a variable rate capability is available, an additional capacity enhancement can be achieved by introducing network control of the user bit rate in response to changing traffic levels. We introduce the concept of network control of rate and propose a particular network-control method for code-division multiple access (CDMA) systems. Based on an M/M/∞//M queueing model applied to a cell under heavy traffic conditions and a new performance measure called averaged speech quality, we obtain simulation results to demonstrate how network control of rate can achieve improved speech quality or increased capacity for a given quality objective     

New trends to grow the n-CdZn (S1−xSex)2/p-CuIn(S1−xSex)2 heterojunction thin films for solar cell applications

The n-CdZn(S_1−xSe_x) and p-CuIn(S_1−xSe_x)₂ thin films have been grown by the solution growth technique (SGT) on glass substrates. Also the heterojunction (p–n) based on n-CdZn (S_1−xSe_x)₂ and p-CuIn (S_1−xSe_x)₂ thin films fabricated by same technique. The n-CdZn(S_1−xSe_x)₂ thin film has been used as a window material which reduced the lattice mismatch problem at the junction with CuIn (S_1−xSe_x)₂ thin film as an absorber layer for stable solar cell preparation. Elemental analysis of the n-CdZn (S_1−xSe_x)₂ and p-CuIn(S_1−xSe_x)₂ thin films was confirmed by energy-dispersive analysis of X-ray (EDAX). The structural and optical properties were changed with respect to composition ‘x’ values. The best results of these parameters were obtained at x=0.5 composition. The uniform morphology of each film as well as the continuous smooth thickness deposition onto the glass substrates was confirmed by SEM study. The optical band gaps were determined from transmittance spectra in the range of 350–1000 nm. These values are 1.22 and 2.39 eV for CuIn(S_0.5Se_0.5)₂ and CdZn(S_0.5Se_0.5)₂ thin films, respectively. J–V characteristic was measured for the n-CdZn(S_1−xSe_x)₂/p-CuIn(S_1−xSe_x)₂ heterojunction thin films under light illumination. The device parameters V_oc=474.4 mV, J_sc=13.21 mA/cm², FF=47.8% and η=3.5% under an illumination of 85 mW/cm² on a cell active area of 1 cm² have been calculated for solar cell fabrication. The J–V characteristic of the device under dark condition was also studied and the ideality factor was calculated which is equal to 1.9 for n-CdZn(S_0.5Se_0.5)₂/p-CuIn(S_0.5Se_0.5)₂ heterojunction thin films.     

Electrical and photovoltaic response of bulk hetero-junction device made from poly (3-phenyl azo methine thiophene) (PPAT) and 1, 1′-diallyl substituted 4, 4′-dipyridine (DADP)

Electrical and photovoltaic properties of donor–acceptor composite system comprised of poly (3-phenyl azo methine thiophene) (PPAT) and 1, 1′–diallyl substituted 4, 4′-dipyridine (DADP) were investigated. A significant enhancement of photocurrent was observed when PPAT was blended with DADP. The increase in photocurrent has been explained in terms of efficient charge separation that resulted from the transfer of photo-excited electrons from PPAT to DADP. The strong quenching of fluorescence of PPAT was caused by the presence of DADP that indicates the photo-induced charge transfer from PPAT to DADP. The open circuit voltage (V_oc) generated in the device is independent of the variation of work function of negative metal electrode that has been explained in terms of Fermi level pinning between DADP and metal via surface charges. The electrical characteristics of ITO/PPAT: DADP/Al photovoltaic device were determined by analyzing the dependence of short circuit photocurrent density (J_sc) and V_oc under illumination at different temperatures. The V_oc decreases almost linearly with increasing temperature, while short-circuit photocurrent increases logarithmically with temperature and saturates at higher temperature above 330 K. This dependence of J_sc and V_oc on temperature has been discussed in terms of possible mechanism that involves the photovoltage generation and charge carrier transport in the device under thermally activated state. The photovoltaic device made from PPAT: DADP blend has shown three times higher photosensitivity than that of made from pure PPAT.     

Effect of humidity on structure and electrochromic properties of sol–gel-derived tungsten oxide films

The influence of varying relative humidity (RH55 and 75%) during thin film deposition from an oxalato-acetylated peroxotungstic acid sol by dip coating, on the microstructure and electrochromic properties of pristine tungsten oxide (WO₃) films obtained upon annealing is presented. The films fabricated under a relative humidity of 55% are amorphous whereas the ones cast under a substantially humid atmosphere (RH75%) are characterized by interconnected nanocrystallites with a triclinic phase and a nanoporous surface morphology as well. Upon lithium insertion, larger integrated values of transmission modulation and coloration efficiency are observed over the photopic and solar regions, for the films prepared under a RH75% as compared to that observed for the films deposited under a RH of 55%. Functional improvements are due to the larger surface area of nanocrystallites and a porous microstructure, a consequence of a higher degree of hydration and hydroxylation in the former films in contrast to the non-porous and a rather featureless structure of the latter films. Faster switching kinetics between the clear and blue states, a greater current density for lithium intercalation, a higher diffusion coefficient for lithium and a superior cycling stability, again shown by the film fabricated under a 75% RH confirm that the WO₃ film microstructure is most conducive for a more facile ion insertion–extraction process, which hints at its potential for electrochromic window applications.     

Fabrication of zinc‐loaded hollow glass microspheres (HGMs) for hydrogen storage

The greatest challenge for a feasible hydrogen economy lies on the production of pure hydrogen and the materials for its storage with controlled release at ambient conditions. Hydrogen with its great abundance, high energy density and clean exhaust is a promising candidate to meet the current global challenges of fossil fuel depletion and green house gases emissions. Extensive research on hollow glass microspheres (HGMs) for hydrogen storage is being carried out world‐wide, but the right material for hydrogen storage is yet underway. But many other characteristics, such as the poor thermal conductivity etc. of the HGMs, restrict the hydrogen storage capacity. In this work, we have attempted to increase the thermal conductivity of HGMs by ZnO doping. The HGMs with Zn weight percentage from 0 to 10 were prepared by flame spheroidization of amber‐colored glass powder impregnated with the required amount of zinc acetate. The prepared HGMs samples were characterized using field emission‐scanning electron microscope (FE‐SEM), environmental SEM (ESEM), high‐resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy and X‐ray diffraction (XRD) techniques. The deposition of ZnO on the microsphere walls was observed using FE‐SEM, ESEM and HRTEM which was further confirmed using the XRD and ultraviolet–visible absorption data. The hydrogen storage studies done on these samples at 200 °C and 10‐bar pressure for 5 h showed that the hydrogen storage increased when the Zn percentage in the sample increased from 0 to 2%. The percentage of zinc beyond 2, in the microspheres, showed a decline in the hydrogen storage capacity. The closure of the nanopores due to the ZnO nanocrystal deposition on the microsphere surface reduced the hydrogen storage capacity. The hydrogen storage capacity of HAZn2 was found 3.26 wt% for 10‐bar pressure at 200 °C. Copyright © 2015 John Wiley & Sons, Ltd.     

Design, development and testing of a large-size solar cooker for animal feed

A large-size solar cooker for animal feed has been designed, developed and tested. The cooker employs locally available materials of low cost, e.g. pearl-millet husk and horse excreata. The commercial materials required for its fabrication are plain glass, mild steel angle and sheet, wood and aluminium sheet cooking utensils. The solar cooker is capable of boiling 10 kg of animal feed, sufficient for five cattle per day. The efficiency of the solar cooker is 21·8%. The cost of the cooker is only Rs 1200, which can be recovered in 0·45-1·36 years depending upon the fuel it replaces. The short payback periods suggest that the use of the solar cooker is economic. The use of the cooker will save a lot of firewood, cowdung cake and agricultural waste which are presently used for the boiling of animal feed.