Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

Esophageal stimulation by hydrochloric acid causes neurogenic inflammation in the airways in guinea pigs

To investigate whether tachykinins are released in the airways in response to stimulation of the esophagus, we studied the airway plasma extravasation induced by intraesophageal HCl in the presence or absence of neutral endopeptidase inhibitor phosphoramidon and NK1-receptor antagonist FK-888 in anesthetized guinea pigs. The airway plasma leakage was evaluated by measuring extravasated Evans blue dye in the animals pretreated with propranolol and atropine. Infusion of 1 N HCl into the esophagus significantly increased plasma extravasation in the trachea. Phosphoramidon significantly potentiated plasma extravasation in the trachea and main bronchi, whereas FK-888 significantly inhibited that extravasation in a dose-related manner. In the capsaicin-treated animals, airway plasma extravasation was completely inhibited even in the presence of phosphoramidon. Tracheal plasma extravasation potentiated by phosphoramidon was significantly inhibited in the bilateral vagotomized animals. These results suggest that 1) tachykinin-like substances are released to cause plasma extravasation in the airways as a result of intraesophageal HCl stimulation and 2) there are neural pathways communicating between the esophagus and airways, including the vagus nerve.     

Effects of electrode arrangement and pressure on synthesis of diamond films by arc discharge plasma jet chemical vapor deposition

The setup and deposition conditions of electrode arrangement and pressure have been studied to synthesize diamond films at high growth rate on wide area efficiently by arc discharge plasma jet chemical vapor deposition. An apparatus has been used in which four plasma torches, one is used for cathode and the others for divided anodes, are arranged and the positions of these torches are changeable. Growth rate, deposition area and thickness of diamond films have increased with changing the electrode arrangements without improvement of thickness variation. Maximum growth rate of our apparatus has occurred at the pressure of 6.7 kPa and diamond films that have less variations of quality and surface roughness have been synthesized at lower pressure during deposition. Moreover, a high conversion rate, which is the ratio of carbon atoms that form diamond in supplied methane gas, of 16% has been obtained at the pressure of 6.7 kPa and methane concentration of 2%.     

Isolation identification and quantitative culture of Helicobacter pylori from gastric mucosa

The biopsy specimens were homogenized and diluted ten-fold serially in Hank's solution. Each dilution samples were streaked on Skirrow's selective medium. The plates were incubated at 37 degrees C 5 to 7 days under micro-aerobic condition and counting the viable cell of H. pylori. The positive rate of specimens with H. pylori in active gastric ulcer tissue (62.0%) was higher than that in scarred tissue (51.9%). Number of H. pylori viable cells in active ulcer tissue was significantly larger than in scarred tissue. The positive correlation between Raw's gastritis score of specimens from patients with erosive gastritis and number of H. pylori viable cells was clearly noticed.     

Inhibition of liver metastasis of human pancreatic carcinoma by angiogenesis inhibitor TNP-470 in combination with cisplatin

The anti-tumor and anti-metastatic effects of O-(chloroacetyl-carbamoyl) fumagillol (TNP-470), an angiogenesis inhibitor, and cisplatin (CDDP), an anti-neoplastic agent, were investigated using our established liver-metastasizing pancreatic carcinoma line, HPC-3H4. HPC-3H4 was injected into the spleens of nude mice. Mice were randomly divided into 5 groups; a control group given saline solution, a group receiving 45 mg/kg TNP-470, a group receiving 90 mg/kg TNP-470, a group receiving 90 mg/kg TNP-470 in combination with 0.25 mg/kg CDDP, and a group receiving 0.25 mg/kg CDDP. In the control group, liver metastasis developed in 14 of 15 mice (93.3%). Liver metastasis developed in 9 of 11 mice (81.8%) receiving 0.25 mg/kg CDDP. It developed in 11 of 15 mice (73.3%) receiving 45 mg/kg TNP-470, in 17 of 18 mice (94.4%) receiving 90 mg/kg TNP-470, and in 4 of 10 mice (40%) receiving 90 mg/kg TNP-470 in combination with 0.25 mg/kg CDDP. TNP-470 in combination with CDDP displayed a significant inhibitory effect on liver metastasis compared to the control. Although TNP-470 alone and CDDP alone had no effect on the tumor growth in vivo, 90 mg/kg TNP-470 in combination with 0.25 mg/kg CDDP had a significant effect. In vitro examinations demonstrated that the growth of HPC-3H4 cells was only mildly inhibited by TNP-470, but the production of vascular endothelial growth factor (VEGF) by HPC-3H4 was clearly inhibited by TNP-470. The inhibitory effect on the production of VEGF was not strong with CDDP treatment. These results indicate that the angiogenesis inhibitor TNP-470 in combination with low-dose CDDP has inhibitory activity against liver metastasis of human pancreatic carcinoma.     

Novel Constitutive Equation for Predicting Dynamic Recrystallization During Hot Working Considering the Efficiency of Power Dissipation

The efficiency of power dissipation (η) in a dynamic material model has been conventionally used for qualitative predictions to estimate the hot working conditions at which dynamic recrystallization (DRX) is dominant. However, predicting the quantitative value of the DRX fraction (X_DRX) from η remains a challenge. In this paper, a constitutive equation is proposed to quantitatively predict X_DRX using η. The proposed equation for describing X_DRX is derived from the reaction rate equation using the assumption that the DRX rate depends on η. The proposed equation is verified via hot compression tests of equiaxed Ti–6Al–4V ELI alloys (Ti-64) in the (α + β) region. The predicted and experimental X_DRX values are found to be generally consistent with one another, exhibiting an average absolute error of 0.05. Furthermore, the proposed equation provides the same level of prediction accuracy as the conventional Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation. Therefore, the proposed equation can be used to quantitatively predict X_DRX following hot compression tests of equiaxed Ti-64. Moreover, compared with the JMAK equation, the proposed equation is expressed in fewer parameters and constant terms. It is, thus, expected to facilitate the quantitative prediction of X_DRX.

     

Application of enzymatically gelled chitosan solutions to water‐resistant adhesives

An investigation was undertaken on the application of dilute chitosan solutions gelled by tyrosinase‐catalyzed reaction with 3,4‐dihydroxyphenethylamine (dopamine). The tyrosinase‐catalyzed reaction with dopamine conferred water‐resistant adhesive properties to the semidilute chitosan solutions. The viscosity of the chitosan solutions increased highly by the tyrosinase‐catalyzed reaction and the subsequent reactions between o‐quinone compounds and chitosan. These highly viscous, gel‐like modified chitosan materials were allowed to spread onto the surfaces of the glass slides, which were tightly lapped together and held them in water. Tensile shear adhesive strength of over 400 kPa was observed for the modified chitosan samples. The increase in the amino group concentration of the chitosan solutions and the molecular mass of the chitosan used effectively led to the increase in adhesive strength of the glass slides. In addition, in the case where the chitosan solution was gelled by the enzymatic reaction with dopamine in the presence of poly(ethylene glycol), adhesive strength sharply increased at shorter reaction times concomitantly with the increase in the viscosity of the chitosan solutions because the tyrosinase activity effectively was retained by poly(ethylene glycol). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1818–1827, 2007