Fatigue striation in a wide range of crack propagation rates up to 70 μm/cycle in a ductile structural steel

The relationship between striation spacing and fatigue crack propagation rate up to 70 m/cycle was investigated for a ductile structural steel, qualified as JIS SM58Q. A modified compact-type specimen 400 mm wide and a centre-cracked specimen 200 mm wide were tested at a stress ratio, R, of 0 and 0.8. The fracture surface of the specimen was examined in detail under a scanning electron microscope. The crack propagation rate was expressed by a power function of the range of stress intensity factor from 0.1 to 70 m/cycle for R=0 and to 0.5 m/cycle for R=0.8. The striation spacing coincided with the fatigue crack propagation rate over the range 0.1 to 70 m/cycle. The profile of striation was found to be a ridge and valley type, and the ridges on one fracture surface coincided with those on the matching surface. It is suggested that the striation is formed by a plastic blunting mechanism.     

Growth and structure of heteroepitaxial thin films of homologous compounds RAO3(MO)m by reactive solid-phase epitaxy: Applicability to a variety of materials and epitaxial template layers

A reactive solid-phase epitaxy (R-SPE) method combines deposition of a thick amorphous or polycrystalline layer with a desired chemical composition and post-deposition solid-phase epitaxial growth. The solid-phase epitaxial growth is invoked by thermal annealing with an assistance of a sacrificial layer working as an epitaxial template. Thereby it enables us to grow high-quality epitaxial films of complex oxides whose epitaxial films are not grown by conventional high-temperature growth techniques. It was reported that 2-nm-thick ZnO layers worked as template for growing InGaO₃(ZnO)_m (m = integer) epitaxial films. The present study extended the R-SPE technique to growth of various complex oxides with chemical compositions of RAO₃(MO)_m and to use of various epitaxial template layers. We found that mono oxide epitaxial layers such as In₂O₃ and Ga₂O₃ work as template layers as well. Alternatively, a ZnO epitaxial layer is also applicable to ZnO-free compounds. The films obtained were grown heteroepitaxially on YSZ(111) and single-crystalline when the fabrication conditions are optimized.     

ISS experiments for the clarification of boiling and two-phase flow in microgravity and for the development of high-performance space cold plates

Inflow boiling, gravity effects on the distribution of both phases are observed in a heated tube and heat transfer coefficients due to two-phase forced convection is deteriorated in microgravity. In narrow channels between heated and unheated plates, the increase in subcooling enlarges a size of flattened bubble and reduces the frequency of detachment under microgravity conditions resulting the emphasis of heat transfer deterioration. To clarify reasons for the unknown behaviors of interfacial distribution and corresponding characteristics in heat transfer not easily be clarified through the experiments on ground, the opportunity on the experiments utilizing long-term microgravity duration realized in ISS is required. The experiments on microgravity boiling and two-phase flow are proposed by the collaboration of researchers in five countries. A common test loop is designed to conduct multiple experiments by the interchangeable structures of test sections; a transparent heated tube for the visualized flow boiling, a stainless tube for the measurement of CHF data, a copper surface for the heat transfer data of nucleate boiling with superimposed liquid flows in a duct, a glass heated plate with multiple array of small temperature sensors and transparent heaters for the clarification of mechanisms in nucleate boiling heat transfer, and one or two models of cold plates for practical applications. A direction of researches in the present discipline is proposed based on the existing experimental results and on the idea developed by the present authors.     

Czochralski growth of Yb doped oxyapatite for high power laser application

Ca₈(La,Yb)₂(PO₄)₆O₂ (Yb:CLPA) single crystals with the apatite-type structure could be grown from the melt using the Czochralski method. Grown crystal was 18 mm in diameter and 110 mm in length. It is transparent with slightly blue color. Neither visible inclusion nor crack was observed. Thermal conductivity of Yb:CLPA was calculated from the values of thermal diffusivity, heat capacity measurement and density. Luminescent characterization was carried out from the results of emission, absorption and Raman spectrum.     

A two-degree-of-freedom motor-powered gait orthosis for spinal cord injury patients

A number of orthoses have been developed to restore stance and walking in paraplegic subjects. Compliance, however, has been limited, mainly owing to walking effort. Use of the forces produced by actuators is an effective way to solve the problem of the considerable effort required for orthotic gait, namely high muscular effort and high energy expenditure. The purpose of the present study was to investigate the effects of assistance by external actuators on the orthotic gait of spinal cord injury (SCI) patients. Two kinds of linear actuator were developed by using direct current (d.c.) motors for assisting the knee and hip joint of a gait orthosis. They were mounted on the knee and hip joint of a commercial advanced reciprocating gait orthosis (ARGO), and a new two-degree-of-freedom externally powered gait orthosis was thus developed. The orthosis was assessed through inter-subject experiments on five male adult complete SCI patients. Owing to the short training period available for the assisted gait, simultaneous operation of both joint actuators was not conducted: either the knee actuation or the hip actuation was executed only. Thus, the knee actuator and the hip actuator were assessed with a T12 subject and with subjects for T5, T8, T11, and T12 respectively. The motions of the gaits, assisted by the linear actuators, were measured by a Vicon 370 system, and the general gait parameters and compensatory motions were evaluated. Results demonstrated that (a) all subjects could walk without falling, assisted either by the knee or the hip actuator; (b) both the knee and hip joint actuator increased the gait speed and the step length; (c) the knee flexion produced by the orthosis improved the dynamic cosmesis of walking; and (d) lateral compensatory motions as well as vertical ones tended to decrease when the hip joint was assisted, which could contribute to a reduction in walking effort.     

Control of Oxidation State of Eu Ions in Na2O–Al2O3–SiO2 Glasses

Glasses doped with well‐controlled Eu³⁺ and Eu²⁺ ions have attracted considerable interest due to the possibility of tuning the wavelength range of the emitted light from violet to red by using their ⁵D₀→⁷F_j and 5d–4f electron transitions. Glasses were prepared to dope Eu³⁺ ions in a Na₂O–Al₂O₃–SiO₂ system, and the changes in the valence state of Eu³⁺ ions and the glass structure surrounding the Eu atoms during heating under H₂ atmosphere were investigated using fluorescence spectroscopy, X‐ray absorption fine‐structure spectroscopy, and ²⁷Al magic‐angle spinning solid‐state nuclear magnetic resonance spectroscopy. The reduction behavior of Eu³⁺ ions was dependent on the Al/Na molar ratio of the glass. For Al/Na < 1, the Al³⁺ ions formed the AlO₄ network structure accompanied by the Na⁺ ions as charge compensators; the Eu³⁺ ions occupied the interstitial positions in the SiO₄ network structure and were not reduced even under heating in H₂ gas. On the other hand, in the glasses containing Al₂O₃ with the Al/Na ratio exceeding unity, the Eu³⁺ ions commenced to be coordinated by the AlO₄ units in addition to the SiO₄ network structure. When heated in H₂ gas, H₂ gas molecules reacted with the AlO₄ units surrounding Eu³⁺ ions to form AlO₆ units terminated with OH bonds, and reduced Eu³⁺ ions to Eu²⁺ via the extracted electrons.     

Disturbance rejection with information constraints: Performance limitations of a scalar system for bounded and Gaussian disturbances

This paper derives performance limitations for disturbance rejection of scalar systems under information constraints subject to either bounded or Gaussian disturbances. Two kinds of disturbance are treated in a unified manner, using appropriate entropies and distortions. It is shown that the achievable performance cannot be improved even if the maximum information constraint is relaxed to an average information constraint. Another observation is that, while the information constraints are weaker than bit-rate or signal-to-noise ratio constraints on the communication channel, the same performance levels are achieved by the best encoder and decoder for disturbance rejection with the information constraints.