Reactive blending of polyamide with polyethylene: pull-out of in situ-formed graft copolymers and its application for high-temperature materials

Reactive blending of polyamide 6 (PA) with polyethylene (PE) having reactive sites, maleic anhydride (MAH content=0.1 wt%),and glycidyl methacrylate (GMA content=3-12 wt%), was carried out at 70/30 and 65/35 (PA/PE) blend ratios. Blend morphology evolved by reactive blending was analyzed by light scattering and transmission electron microscopy. The blends were then irradiated by electron beam. The degree of crosslinking was estimated by measuring the dynamic storage modulus at a temperature above melting point of PA. It was found that surface-to-surface interparticle distance τ was significantly reduced by the micelle formation via pull-out of in situ-formed graft copolymers. The blend with shorter τ was crosslinked by electron-beam irradiation at the lower dose level. A blend having the minimum τ (∼0.2 μm) was nicely crosslinked at a low dose level same as for PE, and even for the PA matrix system.     

Penetration treatment of plasma-sprayed ZrO2 coating by liquid Mn alloys

The penetration phenomena of liquid manganese (Mn) alloy into porous ZrO₂ (8 vvt % Y₂O₃) coating plasma sprayed on SS400 steel substrate was studied by heating in a vacuum atmosphere. The improvement in mechanical properties of the coating by heat treatment with liquid Mn alloys was examined. Liquid Mn alloys, such as Mn-Cu, Mn-Sn, and Mn-In, rapidly penetrated the coating and formed a chemical bond between the coating and the substrate. The densification of the ZrO₂ coating occurred when ZrO₂ particles were sintered with liquid Mn alloys that penetrated the porous coating. The dense coating was free of porosity, and its hardness increased after heat treatment with Mn alloys, compared with assprayed ZrO₂ coating. Moreover, the fracture toughness of the coating reached the same levels as those of sintered yttria-stabilized PSZ.     

Catastrophic chaos theory: predicting recovery of health or death

Recently, we revealed a standard pattern of a macroscopic molecular network for controlling morphogenetic processes such as the development of organs, including blast, mesoderm, heart, and hands during about sevenfold cell divisions and a standard bio-chemical clock like the circadian one (Naitoh in Artif Life Robot 13, 2008; Japan J Ind Appl Math 28(1), 2011; J Phys Conf Ser 344, 2012; Artif Life Robot 17, 2012) A network model derived logically based on experimental observations is described by a nonlinear differential equation for predicting time evolutions of six macroscopic molecular groups: three gene groups and three enzyme groups, which include promoting and suppressing factors. Here, the macroscopic model extended for also describing aging processes shows various types of cycles and reveals the physical condition for determining whether or not living beings such as humans can survive after getting ill. It is stressed that, after becoming ill, living systems with overly fast generation of information molecules such as various genes end in death, whereas relatively fast production of enzymes leads to recovery. This may also explain an essential feature underlying carcinogenic processes.     

An architecture framework for an adaptive extensible processor

To improve the performance of embedded processors, an effective technique is collapsing critical computation subgraphs as application-specific instruction set extensions and executing them on custom functional units. The problem with this approach is the immense cost and the long times required to design a new processor for each application. As a solution to this issue, we propose an adaptive extensible processor in which custom instructions (CIs) are generated and added after chip-fabrication. To support this feature, custom functional units are replaced by a reconfigurable matrix of functional units (FUs). A systematic quantitative approach is used for determining the appropriate structure of the reconfigurable functional unit (RFU). We also introduce an integrated framework for generating mappable CIs on the RFU. Using this architecture, performance is improved by up to 1.33, with an average improvement of 1.16, compared to a 4-issue in-order RISC processor. By partitioning the configuration memory, detecting similar/subset CIs and merging small CIs, the size of the configuration memory is reduced by 40%.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

Quantitative imaging of Young's modulus of solids: a contact-mechanics study

We developed equipment and methods for measuring quantitatively the local Young's modulus of solids. It consists of an electrodeless langasite oscillator and line antennas, and oscillator vibrations are generated and detected contactlessly. A constant biasing force results from oscillator mass and is independent of surface roughness. The effect of material anisotropy on the measured stiffness is theoretically discussed for studying the limitation of the quantitative measurement. The microscopy has been applied to polycrystalline copper, and the measured modulus is compared to calculations based on electron-backscatter-diffraction measurements. Also, we applied it to a duplex stainless steel and an embedded silicon-carbide fiber. The results reveal textured regions, defects with high sensitivity, and even stiffness distribution in a single grain.     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

Self-identification algorithm for zeolite-based thermal capacity gas sensor

Microsystem Technologies - We demonstrate a new operation mode of thermal gas sensor based on thermal capacity extraction with identification algorithm. The system is a silicon microstructure...     

Mechanical property enhancement of aligned multi-walled carbon nanotube sheets and composites through press-drawing process

A solid-state drawing and winding process was done to create thin aligned carbon nanotube (CNT) sheets from CNT arrays. However, waviness and poor packing of CNTs in the sheets are two main weaknesses restricting their reinforcing efficiency in composites. This report proposes a simple press-drawing technique to reduce wavy CNTs and to enhance dense packing of CNTs in the sheets. Non-pressed and pressed CNT/epoxy composites were developed using prepreg processing with a vacuum-assisted system. Effects of pressing on the mechanical properties of the aligned CNT sheets and CNT/epoxy composites were examined. Pressing with distributed loads of 147, 221, and 294 N/m showed a substantial increase in the tensile strength and the elastic modulus of the aligned CNT sheets and their composites. The CNT sheets under a press load of 221 N/m exhibited the best mechanical properties found in this study. With a press load of 221 N/m, the pressed CNT sheet and its composite, respectively, enhanced the tensile strength by 139.1 and 141.9%, and the elastic modulus by 489 and 77.6% when compared with non-pressed ones. The pressed CNT/epoxy composites achieved high tensile strength (526.2 MPa) and elastic modulus (100.2 GPa). Results show that press-drawing is an important step to produce superior CNT sheets for development of high-performance CNT composites.     

Mobility and Localization of Carriers in a Quasi-One-Dimensional Electron System over Liquid Helium

The properties of a quasi-one-dimensional (Q1D) electron system on liquid helium are considered and the experiments on the carrier transport are presented. It has been shown that the electron mobility changes from high values close to that for bulk helium to very small values as a function of the Q1D channel width. Such a behaviour of is connected to a gradual transition from the regime of the quasi-free movement of the carriers in a Q1D system to the conditions of strong localization of the electrons. In the last case depends on temperature exponentially with the activation energy of a few degrees. It is predicted that in Q1D channels in regime of the localization two optical plasmon branches can exist. One of them (a high frequency branch) is connected with the oscillations of electrons in potential wells and another one has lower frequency and is due to the oscillations of dimples, which are created by localized electrons on the liquid helium surface, in the potential wells. Possible new experiments on study of magnetotransport, plasma oscillations and phase diagram of ordered-disordered states in a Q1D electron system of a finite length over liquid helium are proposed and discussed.