Colloidal gold submonolayer-coated thin-film glass plates for waveguide-coupled surface plasmon resonance sensors

A novel optical sensor based on spectroscopic measurement of the plasmon absorption of a colloidal gold submonolayer immobilized upon a planar waveguide has been developed for label-free detection of biomolecular interactions at the sensor's surface. We fabricated the sensor by locally modifying a 50-microm-thick glass plate with hemoglobin (Hb) and then self-assembling gold colloids from the aqueous solution onto the Hb-modified area of the glass plate. Polychromatic light from a xenon-arc lamp was launched into the thin-film glass plate by use of a broadband fiber-coupling method. With the use of a CCD detector to monitor the light beam emitted from an end face of the glass plate, the plasmon absorption spectrum of the colloidal gold submonolayer was determined to depend on the polarization states of the guided light and to change with the refractive index of the medium in contact with the colloids. In addition to simplicity of fabrication and the ease of use, the sensor yields a larger absorbance sensitivity than the normal transmission measurement.     

Microwave-assisted steam distillation for simple determination of polychlorinated biphenyls and organochlorine pesticides in sediments

A novel sample extraction technique for polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) analysis using microwave-heating device is developed. In this study, microwave-assisted extraction (MAE) and steam distillation techniques were combined. Desorption of the anatytes from solid matrixes was accelerated with water vapor which was generated by microwave irradiation. A sample holder in a commercial microwave extraction cell kept the sample from direct contact with the organic solvent for analytes trapping during the treatment process. Therefore, relatively clean extracts were obtained with small amount of solvents. Without any cleanup steps, the obtained extract could be analyzed with gas chromatograph/mass spectrometers (GC/MS). Six PCB congeners (PCB15, 28, 70, 101, 180, 194, 209) and three OCPs (gamma-HCH, 4,4'-DDE, 4,4'-DDD) in two marine sediment samples (a sediment collected from a bay of Kyusyu Island, Japan, and a certified reference material NIST SRM1944) were analyzed by using this microwave-assisted steam distillation (MASD) technique and another extraction method (exhaustive steam distillation, MAE, and Soxhlet extraction); and comparisons of the results are shown in this report. Although recovery yields of highly chlorinated biphenyls (PCB180, 194, 209) and relatively polar OCPs (gamma-HCH, 4,4'-DDD) were low (30-60%) compared with other analytes (PCB15, 28, 70, 101, 4,4'-DDE; recovery, 80-100%), use of isotope labeled internal standards for the MASD technique gave comparable results with the values obtained by other extraction methods and the certified values in the samples.     

A Hydrogen Management Method in Residential Distributed Generation Systems with Photovoltaic Cells and Hydrogen‐Storage Type Fuel Cells

Recently, renewable energy has been attracting attention as a result of global warming and the depletion of fossil fuels. Photovoltaic (PV) systems have spread rapidly around the world because they generate electric power quietly and can be installed in many places. The output power generated in a PV system fluctuates with changes in solar irradiance and panel temperature. The reverse flow of surplus power in output spikes may have a negative effect on electric power quality, such as on the frequency and voltage in a power system. A residential distributed generation (DG) system composed of a fuel cell (FC) unit, an electrolyzer (EL) unit, and a PV system has been proposed in order to resolve these problems. In order to operate this system without interruption, the hydrogen storage volume must be managed. This paper proposes a novel hydrogen management method for a residential DG system with PV cells and hydrogen‐storage type FCs. The hydrogen storage volume is maintained at the preset frequency by operating the FC unit and the EL unit. Models of the PV, FC, and EL were constructed for a simulation. In the simulation, we showed that the proposed management method is viable for a residential DG system with PV cells and hydrogen‐storage FCs.     

Synthesis and Preliminary Evaluation of 11C-Labeled VU0467485/AZ13713945 and Its Analogues for Imaging Muscarinic Acetylcholine Receptor Subtype 4

Muscarinic acetylcholine receptors (mAChRs) have five distinct subunits (M₁–M₅) and are involved in the action of the neurotransmitter acetylcholine in the central and peripheral nervous system. Attributed to the promising clinical efficacy of xanomeline, an M₁/M₄-preferring agonist, in patients of schizophrenia and Alzheimer's disease, M₁- or M₄-selective mAChR modulators have been developed that target the topographically distinct allosteric sites. Herein we report the synthesis and preliminary evaluation of ¹¹C-labeled positron emission tomography (PET) ligands based on a validated M₄R positive allosteric modulator VU0467485 (AZ13713945) to facilitate drug discovery. [¹¹C]VU0467485 and two other ligands were prepared in high radiochemical yields (>30 %, decay-corrected) with high radiochemical purity (>99 %) and high molar activity (>74 GBq μmol⁻¹). In vitro autoradiography studies indicated that these three ligands possess moderate-to-high in vitro specific binding to M₄R. Nevertheless, further physiochemical property optimization is necessary to overcome the challenges associated with limited brain permeability.     

Automated Synthesis of (rac)‐, (R)‐, and (S)‐[18F]Epifluorohydrin and Their Application for Developing PET Radiotracers Containing a 3‐[18F]Fluoro‐2‐hydroxypropyl Moiety

To introduce the 3‐[¹⁸F]fluoro‐2‐hydroxypropyl moiety into positron emission tomography (PET) radiotracers, we performed automated synthesis of (rac)‐, (R)‐, and (S)‐[¹⁸F]epifluorohydrin ([¹⁸F] 1 ) by nucleophilic displacement of (rac)‐, (R)‐, or (S)‐glycidyl tosylate with ¹⁸F^? and purification by distillation. The ring‐opening reaction of (R)‐ or (S)‐[¹⁸F] 1 with phenol precursors gave enantioenriched [¹⁸F]fluoroalkylated products without racemisation. We then synthesised (rac)‐, (R)‐, and (S)‐ 2‐{5‐[4‐(3‐[¹⁸F]fluoro‐2‐hydroxypropoxy)phenyl]‐2‐oxobenzo[d]oxazol‐3(2H)‐yl}‐N‐methyl‐N‐phenylacetamide ([¹⁸F] 6 ) as novel radiotracers for the PET imaging of translocator protein (18 kDa) and showed that (R)‐ and (S)‐[¹⁸F] 6 had different radioactivity uptake in mouse bone and liver. Thus, (rac)‐, (R)‐, and (S)‐[¹⁸F] 1 are effective radiolabelling reagents and can be used to develop PET radiotracers by examining the effects of chirality on their in vitro binding affinities and in vivo behaviour.     

The effects of di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) administration on human intestinal microbiota

Di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) was shown to enhance Ca absorption in rat and human intestine. The effects of DFA III administration (9 g per day for 4 weeks that corresponded to 3-fold the optimal dosage of DFA III) on human intestinal microbiota were studied using denaturing gradient gel electrophoresis (DGGE). The major groups of human intestinal microbiota reported previously: the Bacteroides, the Clostridium coccoides group (Clostridium cluster XIVa), the Clostridium leptum group (Clostridium cluster IV), and the Bifidobacterium group were detected. The similarity of 30 DGGE profiles based on the V3 region (before and after administration to the 15 subjects) of the 16S rDNA were calculated using Pearson's correlation based on numbers, positions and intensity of bands, and then a dendrogram of DGGE profiles was constructed by the unweighted pair group method using arithmetic average (UPGMA) clustering method. By these analyses, no difference in DGGE profiles after DFA III administration was observed in healthy subjects, while two subjects with chronic constipation showed different profiles, namely on numbers, positions and the intensity of some bands. Their stools were softer and stool frequencies increased and they obtained relief from constipation.     

Performance of compression/absorption hybrid refrigeration cycle with propane/mineral oil combination

This paper discusses the feasibility of a vapor compression/absorption hybrid refrigeration cycle for energy saving and utilization of waste heat. The cycle employs propane as a natural refrigerant and a refrigeration oil as an absorbent. A prototype of the cycle is constructed, in which a compressor and an absorption unit are combined in series. The performance of the cycle is examined both theoretically and experimentally. Although the solubility of the propane with the oil is not enough as a working pair in the absorption unit, the theoretical calculation shows that the hybrid cycle has a potential to achieve a higher performance in comparison with a simple vapor compression cycle by using the waste heat. In the experiment, the prototype cycle is operated successfully and it is found that an improvement of an absorber is necessary to achieve the good performance close to the theoretical one. The application of an AHE (absorber heat exchanger) can reduce the heat input to a generator. Further examinations on some other combinations of refrigerant/refrigeration oil and additives are desirable.     

Shear properties of metal-free wooden load-bearing walls using plywood jointed with a combination of adhesive tape and wood dowels

In this study, the potential of wood-only (metal-free) load-bearing walls was proposed and tested based on the idea of using the same type of material throughout wherever possible while improving basic properties such as strength, sound insulation, and heat insulation. Specifically, a technique was tested of combining pressure sensitive adhesive tape and wood dowels in place of nails for load-bearing structures with panel reinforcement represented by wood-frame construction. For this paper, its strength was evaluated by conducting in-plane shear tests, which revealed that the initial rigidity and maximum load of the proposed test specimens were greater than that of specimens using nails for jointing. However, the shear load factor, which is calculated based on some strength parameters and which forms the foundation of housing strength design, was slightly lower than that of the nail-jointed specimen. This was because there was a large decline in post-collapse resistance and a lower calculated absorbed energy caused by brittleness. The early detachment of panels was also revealed as a problem in the tests.     

Growth of Cu2ZnSnS4 thin films on Si (100) substrates by multisource evaporation

Cu₂ZnSnS₄ films were grown on Si (100) by vacuum evaporation using elemental Cu, Sn, S and binary ZnS as sources. X-ray diffraction patterns of films grown at different substrate temperatures indicated that polycrystalline growth was suppressed and the orientational growths were relatively induced in a film grown at higher temperatures. Tetragonal structure of Cu₂ZnSnS₄ films was confirmed by studying RHEED patterns. The existence of c-axis ([001] direction) growth, two kinds of a-axis (〈100〉 direction) growth and four kinds of {112} twins which can be classified as two symmetrical pairs is proposed. Broad emissions at around 1.45 eV and 1.31 eV were observed in the photoluminescence spectrum measured at 13 K.