Submilliampere lasing of Zn-diffused mesa buried-hetero AlxGa1-xAs/GaAs multi-quantum-well lasers at 77 K

Extremely low-threshold semiconductor lasers were fabricated by forming Zn-diffused mesa buried-hetero (DMB) structures from low-pressure MOCVD-grown AlxGa1-xAs/GaAs multi-quantum-well, separate-confinement heterostructure wafers. CW threshold currents as low as 880 ?A at 77 K and 2.4 mA at room temperature were obtained for a 100 ?m-long device.     

Evaluation of three-dimensional effects in short deep beams using a rigid-body-spring-model

Three-dimensional (3-D) effects in short deep beams without stirrups that failed in shear were investigated experimentally and analytically. Two deep beams with a shear span to depth ratio (a/d) of 0.5 and with different beam widths were tested. The effect of beam width on load-carrying capacity, failure mode, crack pattern and 3-D behavior was investigated, and shape effect due to beam width was clarified. In addition, the beams were analyzed by the 3-D rigid-body-spring model (RBSM). RBSM is a discrete form of modeling that presents realistic behavior from cracking to failure, and 3-D RBSM is applicable to simulate 3-D behavior as well as the confinement effect of concrete. Analytical results in terms of load–displacement curves and crack pattern are compared with the experimental results. Three-dimensional deformations, strut widths and cross-sectional stress distribution are investigated analytically and compared with the experimental results to determine 3-D behavior in detail. The 3-D effects in short deep beams are clarified.     

Experimental Evaluation of Characteristics of SR Motor Made of Permendur

A switched reluctance (SR) motor has a doubly salient pole structure. The performance of the SR motor strongly depends on the magnetic properties of the core material, since it consists only of an iron core and copper windings. This study experimentally evaluates the performance of an SR motor made of permendur (Fe–49% Co alloy), which has very high saturation flux density and low core loss. Two types of SR motors that have the same dimensions but different core materials are used: one motor is made of the conventional nonoriented Si steel, and the other is made of permendur. Comparison of the characteristics of the two motors shows that the performance of the permendur SR motor surpasses that of the conventional one in terms of output power and efficiency. © 2014 Wiley Periodicals, Inc. Electr Eng Jpn, 187(1): 51–57, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22431     

A Study of Mutual Coupling between Vertical Grounding Electrodes

This paper investigates the mutual grounding impedance between vertical grounding electrodes based on field measurements and FDTD simulations. In the case of vertical electrodes, the mutual impedance between the electrodes is almost completely independent of the electrode length, and thus the induced voltage is nearly constant as the electrode length becomes longer. This characteristic is different from that of an overhead conductor, where the electromagnetic‐induced voltage is proportional to the conductor length. The greater the separation distance between the electrodes, the smaller the induced voltage, as in the case of an overhead conductor. The propagation speed increases as the separation increases. It is found that the speed is not necessarily proportional to the inverse of the relative permittivity of the earth.     

Microbial synthesis and properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

Microbial synthesis of copolymers of [R]-3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB), P(3HB-co-4HB), by Alcaligenes eutrophus, Alcaligenes latus, and Comamonas acidovorans from various carbon sources has been studied. The copolyester compositions varied from 0 to 100 mol% 4HB, depending on the microorganism and the combination of carbon substrates supplied. The thermal and physical properties of compositions with 0–100 mol% 4HB were investigated. The copolyesters represented a wide variety of polymeric materials, from hard crystalline plastic to very elastic rubbers, depending on composition. The copolyester films with high 4HB fractions (64–100 mol% 4HB) exhibited the characteristics of a thermoplastic elastomer, and the tensile strength increased from 17 to 104 MPa as the 4HB fraction increased. The enzymatic degradation of P(3HB-co-4HB) films was studied in an aqueous solution of extracellular polyhydroxybutyrate (PHB) depolymerase from Alcaligenes faecalis or lipase from Rhizopus delemer. The erosion rate of P(3HB-co-4HB) films was strongly dependent on the copolymer composition. In addition, environmental degradation of P(3HB-co-4HB) films in sea water was investigated.     

Maresin-1 and Inflammatory Disease

Inflammation is an essential action to protect the host human body from external, harmful antigens and microorganisms. However, an excessive inflammation reaction sometimes exceeds tissue damage and can disrupt organ functions. Therefore, anti-inflammatory action and resolution mechanisms need to be clarified. Dietary foods are an essential daily lifestyle that influences various human physiological processes and pathological conditions. Especially, omega-3 fatty acids in the diet ameliorate chronic inflammatory skin diseases. Recent studies have identified that omega-3 fatty acid derivatives, such as the resolvin series, showed strong anti-inflammatory actions in various inflammatory diseases. Maresin-1 is a derivative of one of the representative omega-3 fatty acids, i.e., docosahexaenoic acid (DHA), and has shown beneficial action in inflammatory disease models. In this review, we summarize the detailed actions of maresin-1 in immune cells and inflammatory diseases.     

Comparison of RRR-α- and all-rac-α-tocopherol uptake by permanent rat skeletal muscle myoblasts (L6 cells): Effects of exogenous lipoprotein lipase

The purpose of the present investigation was to test whether permanent skeletal muscle cells (rat L6 cells) could serve as an in vitro model for α-tocopherol (αTocH) biodiscrimination studies. L6 cells were incubated in the presence of high density lipoprotein (HDL), low density lipoprotein (LDL), and very low density lipoprotein (VLDL) labeled in the lipid moiety with either all-rac-or RRR-[¹⁴C]αTocH. These incubations were performed either in the absence or in the presence of exogenously added bovine lipoprotein lipase (LPL) since skeletal muscle is one of the major expression sites of LPL in vivo. Time-dependent uptake studies (up to 24 h) in the absence of LPL have shown that equipotent doses of all-rac- and RRR-[¹⁴C]αTocH (1.36∶1) led to almost identical accumulation of the tracer, independent of the lipoprotein class used as αTocH carrier. With regard to αTocH donor capacity, it appeared that HDL is the most potent αTocH donor, followed by LDL and VLDL. In the presence of LPL, all-rac- and RRR-[¹⁴C]αTocH uptake was significantly enhanced (between two- and tenfold). Biodiscrimination studies using chiral high-performance liquid chromatographic analysis with radiometric detection of the corresponding methyl ether derivatives on a Chiralcel OD column have demonstrated that the 2S-and 2R-isomers of αTocH were taken up in a 1∶1 ratio by L6 cells independent of the absence or presence of LPL. In addition, we have not observed biodiscrimination between the four 2R-isomers, i.e., there was no preferential accumulation of the RRR-isomer. These data suggest that L6 cells do not discriminate between different αTocH isomers and that the addition of endogenous LPL significantly enhances the uptake of RRR- and all-rac-αTocH.     

Guiding and blocking of highly charged ions through a single glass capillary

Highly charged ions produced in an electron beam ion trap, I^q+, q = 10-50, were transmitted through a tapered glass capillary having diameter of at the end. We found that for a particular beam current, there exists an optimum tilting angle of the capillary in which a steady output of ions is observed, while for smaller angles, the ion counts first rise, then gradually decay on a time scale of minutes. In the case of steady transmission, the charge state distribution is found to be slightly towards the lower side.     

Basic information on new regulatory criteria requiring on-site emergency preparedness for accelerator facilities in Japan

For basic information on new regulatory criteria, the dose rate around a thick target bombarded by proton, electron, or carbon beam having incident energy of 10 MeV–50 GeV (per nucleon in case of carbon) was simulated using the PHITS Monte Carlo code. Based on this simulation, the benchmark which is ‘1 Sv/h at 1 m away from the beam line’ assuming 1% beam loss was evaluated, and compared with the criteria in France and Canada. Based on this evaluation, a new regulatory criteria has been established for requiring on-site emergency preparedness for accelerator facilities in Japan, which is required for the ion accelerator beyond the ion beam of 100 MeV/nucleon and 0.5 kW beam power, and the electron accelerator beyond the electron beam of 50 MeV energy and 1 kW beam power.