Effect of Hydrogen Atmosphere on Pyrolysis of Cured Polycarbosilane Fibers

SiC-based fibers with various chemical compositions were synthesized using an irradiation-curing process. Polycarbosilane (PCS) fibers were cured by irradiation with an electron beam in a helium atmosphere. The cured PCS fibers were pyrolyzed at 1300°C under controlled hydrogen or argon atmospheres, and SiC fibers with C/Si of 0.84 to 1.56 were obtained. The fibers consisted of <1.0 wt% O, <0.2 wt% N, <0.1 wt% H, with the balance being Si and C. The mechanism of pyrolytic transformation of cured PCS to SiC-based ceramics was investigated using TG/DTA analysis. Greater mass losses were observed during pyrolysis in a hydrogen atmosphere than in argon. This result suggests that the hydrogen atmosphere suppresses H₂ evolution and helps to remove excess carbon as CH₄ during pyrolysis. The microstructure and mechanical properties of the resulting SiC-based fibers were found to be very dependent on their C/Si chemical compositions.     

Structure and viscoelastic properties of epoxy resins prepared from four-nuclei novolacs

The relation between the structure and the viscoelastic properties of seven kinds of epoxy resins was studied. Seven tetraglycidylethers were synthesized from four-nuclei novolacs in which the positions of methylene linkage or number of kind of substituents were different. These epoxy compounds were cured with diaminodiphenylmethane as a hardener. From the viscoelastic properties of the fully cured resins with the hardener, characteristic properties such as glass transition temperature (T_g), average molecular weight between crosslinking points (M̄_c), and front factor (ϕ) were obtained. It was concluded that higher linearity in the main chain of epoxy resins gave a cured resin with a higher T_g, a smaller M̄_c, and a larger ϕ.     

Structural motif of phosphate-binding site common to various protein superfamilies: all-against-all structural comparison of proteinmononucleotide complexes

In order to search for a common structural motif in the phosphate-bindingsites of protein–mononucleotide complexes, we investigatedthe structural variety of phosphate-binding schemes by an all-against-allcomparison of 491 binding sites found in the Protein Data Bank.We found four frequently occurring structural motifs composedof protein atoms interacting with phosphate groups, each ofwhich appears in different protein superfamilies with differentfolds. The most frequently occurring motif, which we call thestructural P-loop, is shared by 13 superfamilies and is characterizedby a four-residue fragment, GXXX, interacting with a phosphategroup through the backbone atoms. Various sequence motifs, includingWalker's A motif or the P-loop, turn out to be a structuralP-loop found in a few specific superfamilies. The other threemotifs are found in pairs of superfamilies: protein kinase andglutathione synthetase ATPase domain like, actin-like ATPasedomain and nucleotidyltransferase, and FMN-linked oxidoreductaseand PRTase.     

Nucleation effect of inclusion complexes with different polyolefin as guest molecules on the crystallization of polypropylene

The γ‐cyclodextrin (γ‐CD) inclusion complexes (ICs) with four kinds of polyolefin (PO) as guest molecules were prepared. The crystallization behavior of isotactic polypropylene (iPP) blended with the γ‐CD and γ‐CD–PO ICs was investigated by differential scanning calorimetry, polarized optical microscopy, and light scattering. The iPP blended with the ICs was found to exhibit higher crystallization temperature (T_C), smaller spherulites, and faster crystallization rate than those of neat iPP, indicating that the ICs play a role of nucleating agent on the crystallization of iPP and induce accelerated crystallization. The IC with PO having higher T_C as guest molecules showed higher nucleation effect than the IC with PO having lower T_C as guest molecules. The results suggest that the nucleation effect of these ICs was affected by the kinds of the guest molecules. The higher T_C guest molecules could result in higher nucleation effect. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Use of a Metal-mould Process in the Development of Hemispherical Heavy-walled Castings

The exacting quality required of hemispherical heavy-walled steel castings, used in nuclear power applications, has been remarkably improved by the adoption of a newly developed metal-mould process. This technique is dependent on the use of a metal core. The optimum conditions for solidification were determined by the finite element analytical method. The appropriate wall-thickness of the chill elements was also investigated using data based on actual experience. The core was designed in such a manner that the surface carried a series of concave “dimples” in the manner of a golf-ball, the pattern being intended to prevent the formation of cracks, generated on the casting surface when in contact with a metal mould. Stresses caused by solidification shrinkage were reduced by splitting the core. In the event, the casting structure conformed well to the results of the solidification analysis. Radiographic examination revealed a high level of soundness, with no trace of internal defects. No anisotropy was detected in mechanical properties. It is shown that this process is being currently employed in the manufacture of actual products.     

Experimental analysis of flow structure in contra-rotating axial flow pump designed with different rotational speed concept

As a high specific speed pump, the contra-rotating axial flow pump distinguishes itself in a rear rotor rotating in the opposite direction of the front rotor, which remarkably contributes to the energy conversion, the reduction of the pump size, better hydraulic and cavitation performances. However, with two rotors rotating reversely, the significant interaction between blade rows was observed in our prototype contra-rotating rotors, which highly affected the pump performance compared with the conventional axial flow pumps. Consequently, a new type of rear rotor was designed by the rotational speed optimization methodology with some additional considerations, aiming at better cavitation performance, the reduction of blade rows interaction and the secondary flow suppression. The new rear rotor showed a satisfactory performance at the design flow rate but an unfavorable positive slope of the head-flow rate curve in the partial flow rate range less than 40% of the design flow rate, which should be avoided for the reliability of pump-pipe systems. In the present research, to understand the internal flow field of new rear rotor and its relation to the performances at the partial flow rates, the velocity distributions at the inlets and outlets of the rotors are firstly investigated. Then, the boundary layer flows on rotor surfaces, which clearly reflect the secondary flow inside the rotors, are analyzed through the limiting streamline observations using the multi-color oil-film method. Finally, the unsteady numerical simulations are carried out to understand the complicated internal flow structures in the rotors.     

Abilities of cumulus and granulosa cells to enhance the developmental competence of bovine oocytes during in vitro maturation period are promoted by midkine; a possible implication of its apoptosis suppressing effects

We previously reported that when midkine (MK), a heparin-binding growth differentiation factor was used in in vitro maturation (IVM) culture of bovine cumulus-enclosed oocytes (CEOs), their developmental competence to the blastocyst stage after in vitro fertilization (IVF) was enhanced and the effect of MK might be mediated by its action upon mural granulosa cells and cumulus cells that closely surround the oocyte. In the present study, when denuded oocytes (DOs) were matured in IVM medium with or without MK (200 ng/ml) in the presence or absence of isolated cumulus cell masses and subjected to IVF, the enhancing effects of MK on the developmental competence of DOs to the blastocyst stage after IVF were exerted only in the presence of cumulus cells. In addition, we prepared the conditioned media of granulosa cells cultured with or without 200 ng MK/ml (CMMK+ or CMMK- respectively) and examined their effects on the IVM of DOs in terms of their developmental competence to the blastocyst stage after IVF. The supplementation of CMMK+ into IVM medium at 40% (v/v) significantly enhanced the blastocyst development compared with the no additive control and the CMMK- supplemented groups. Furthermore, the effects of MK during IVM of bovine CEOs on the cumulus cell apoptosis were investigated. CEOs were cultured up to 24 h in IVM medium without (control) or with 200 ng MK/ml. The genomic DNA was extracted from CEOs at 0, 6, 12, 18 and 24 h of IVM and subjected to ligation-mediated PCR (LM-PCR) to detect the apoptotic internucleosomal DNA fragmentation. DNA fragmentation was scarcely detected at the start of IVM, whereas it increased time-dependently as the IVM culture progressed. The degree of the fragmentation was significantly lower in the MK-treatment group compared with the control group at 18 and 24 h of IVM. The apoptosis-suppressing effect of MK on cumulus cells was further confirmed in situ by using TUNEL on CEOs. In conclusion, data from the present study further confirmed that MK enhances the developmental competence of bovine oocytes via cumulus and granulosa cells. It was also demonstrated that MK suppresses the apoptosis that occurs in cumulus cells during the period of IVM of bovine CEOs. The putative soluble factor(s) from cumulus cells was suggested from the experiment using CMMK+ . MK may promote the production of such factors in part by its anti-apoptotic effects on cumulus cells.     

The influence of side chains on formation of inclusion complexes prepared with polyolefin and cyclodextrins

We investigated the formation of inclusion complexes (ICs) between cyclodextrins (CDs) with different cavity size and polyolefin (PO) with different side chains by using Fourier transform infrared (FTIR) spectroscopy, wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry. The analysis of FTIR spectra revealed that the resultants were complexes of CD and PO, and the analysis of WAXD revealed that the molecules of CD had a channel structure due to the formation of ICs. We found that IC could not be obtained when the cavity size of CD was small for PO molecules to thread and it was too large for cross-sectional area of PO molecules. Thus, it was found that PO1 with few side chains could form IC with α-CD, and PO2 with ethyl side chain could form IC with β-CD and γ-CD, while the PO3 with 2-methyl-propyl side chain could form IC with γ-CD. These results suggest that the cross-sectional areas of polymer and the cavity size of CDs play critical roles in the formation of ICs. It is only possible to form ICs when the polymer chains can tread into cavities of CDs, and the space between the polymer and CD is suitable to provide enough intermolecular interaction to keep the structure of IC stable.     

Basic design of 70-MW-class superconducting generators

The application of superconductivity technology to electric power apparatus is very important from the viewpoint of energy saving. Especially, the superconducting generators using superconductors as the field windings have many merits compared with conventional generators. Super-GM has been researching and developing 70-MW-class model machines since FY 1988 for a scheduled period of eight years, aiming at a 200-MW-class superconducting generator. This paper describes the basic specifications and designs of 70-MW-class superconducting generators by Super-GM and also describes the propriety of these basic specifications and designs.     

CONTINUOUS VACUUM DRYER FOR ENERGY SAVING

A continuous vacuum dryer for energy saving has been developed in order to produce dried foods without heat denaturation in the products. This drying method is suitable for heat sensitive I and highly viscous foods and can dry to 1 to 4% in moisture content with good quality at around 40°C in product temperature andin 5 -10 min a drying time. Feed material with high viscosity has to I have uniform distribution on the belt in the vacuum chamber to I keep a constant drying for which a special feed nozzle has been developed after considerabl~ testing. Heat transfer on the wet material in the dryer has occurred by both conduction and radiation because of the design so that the thermal efficiency in