Giant room-temperature magnetoresistance in single-crystal Fe/MgO/Fe magnetic tunnel junctions

The tunnel magnetoresistance (TMR) effect in magnetic tunnel junctions (MTJs) is the key to developing magnetoresistive random-access-memory (MRAM), magnetic sensors and novel programmable logic devices. Conventional MTJs with an amorphous aluminium oxide tunnel barrier, which have been extensively studied for device applications, exhibit a magnetoresistance ratio up to 70% at room temperature. This low magnetoresistance seriously limits the feasibility of spintronics devices. Here, we report a giant MR ratio up to 180% at room temperature in single-crystal Fe/MgO/Fe MTJs. The origin of this enormous TMR effect is coherent spin-polarized tunnelling, where the symmetry of electron wave functions plays an important role. Moreover, we observed that their tunnel magnetoresistance oscillates as a function of tunnel barrier thickness, indicating that coherency of wave functions is conserved across the tunnel barrier. The coherent TMR effect is a key to making spintronic devices with novel quantum-mechanical functions, and to developing gigabit-scale MRAM.     

Study on anisotropy of growth rate of ice crystal in supercooled water

The purpose of this research was to investigate the ice growth of a single crystal in three dimensions. Three-dimensional pattern of ice crystal growth in supercooled water was observed using Mach–Zehnder spectro-interferometer. Temperature was varied from −0.3 to −1.6 °C. It was found that the ice crystal began to grow as a single crystal at the tip of the capillary tube and propagated freely in supercooled water. Time variation of the shape of dendrite on a–c plane was obtained. It was found that half parabola fits the shape very closely, and the coefficient of squared term, a, of a quadratic function was calculated. The coefficient, a varied in time but at quasi steady state it was found to be depending mostly upon the degree of supercooling. Furthermore, the growth velocity in c-axis at the flat surface was calculated from the thickness measured. It was found that the velocity in c-axis is independent of the degree of supercooling but depends upon time, in other words, the thickness in c-axis.     

Spider Mites Assess Predation Risk by Using the Odor of Injured Conspecifics

When a predatory mite, Amblyseius womersleyi is present, Tetranychus kanzawai takes refuge on its webs during a quiescent stage. To examine the factors responsible for the antipredator behavior of T. kanzawai, we exposed T. kanzawai to the odor of conspecifics, A. womersleyi, and both T. kanzawai and A. womersleyi. The proportion of T. kanzawai females that took refuge was significantly higher when they were exposed to the odor of `both T. kanzawai and A. womersleyi.' Furthermore, the proportion of T. kanzawai females that took refuge was significantly higher when they were exposed to injured conspecifics than to intact conspecifics. These results suggest that T. kanzawai assesses predation risk, at least in part, by using the odor of injured conspecifics.     

Sentence alignment using P-NNT and GMM

Parallel corpora have become an essential resource for work in multilingual natural language processing. However, sentence aligned parallel corpora are more efficient than non-aligned parallel corpora for cross-language information retrieval and machine translation applications. In this paper, we present two new approaches to align English–Arabic sentences in bilingual parallel corpora based on probabilistic neural network (P-NNT) and Gaussian mixture model (GMM) classifiers. A feature vector is extracted from the text pair under consideration. This vector contains text features such as length, punctuation score, and cognate score values. A set of manually prepared training data was assigned to train the probabilistic neural network and Gaussian mixture model. Another set of data was used for testing. Using the probabilistic neural network and Gaussian mixture model approaches, we could achieve error reduction of 27% and 50%, respectively, over the length based approach when applied on a set of parallel English–Arabic documents. In addition, the results of (P-NNT) and (GMM) outperform the results of the combined model which exploits length, punctuation and cognates in a dynamic framework. The GMM approach outperforms Melamed and Moore’s approaches too. Moreover these new approaches are valid for any languages pair and are quite flexible since the feature vector may contain more, less or different features, such as a lexical matching feature and Hanzi characters in Japanese–Chinese texts, than the ones used in the current research.     

Electrochemical Fabrication of Metallic Nanowires and Metal Oxide Nanopores

A nuclear track etched polycarbonate membrane filter with numerous cylindrical nanopores was applied as a nanoporous template for growing metallic nanowires. Nickel, cobalt, and iron nanowires were electrodeposited into the cylindrical nanopores. Cathodic polarization curves were measured to determine an optimum condition for growing nanowires. The shape of nanowires was observed using scanning electron microscope (SEM) and the crystal structure was analyzed using transmission electron microscopy (TEM). Diameter and length of nanowires corresponded to those of nanopores and each nanowire was composed of a single crystal. Anodized aluminum oxide films were also fabricated as a novel nanoporous template. The pore length and diameter was controlled changing anodizing conditions. Ordering behavior of nanopores array in an anodized aluminum oxide film was also investigated to make a novel nanoporous template with a highly ordered honeycomb array of nanopores.     

Effects of Broadband Laser Generated Ultrasound on Array Gain

Array gain is a common parameter used in laser phased array research. This paper will present a new parameter called the frequency modulation of laser phased array (FMLPA). The array gain model for laser phased arrays was derived using an assumption that ultrasound from each array member interferes with each other. This would be always true if laser generated ultrasound is narrow band. However, laser generation of ultrasound is broad band. Broad band ultrasound signals have short duration in the time domain. If the time delay between generated wave fronts from each array member is longer than the duration of the broad band ultrasound signal from each array member, the ultrasound signals from each array member will not interfere with each other. The time delay between generated wave fronts from each array member is 0 s at a laser phased array’s beam steering angle and increases away from the beam steering angle. Therefore, ultrasound from each array member always interfere at angles close to the beam steering angle. However, ultrasound from each array member may not interfere at angles away from the beam steering angle depending on the time delay between generated wave fronts and duration of the broad band ultrasound signal. A theoretical model of the FMLPA was developed and experimentally verified for use when ultrasound from each array member does not interfere with each other. It was experimentally verified that current array gain equations still apply when ultrasound from array members interfere with each other. The FMLPA can be used to create new techniques for measuring weld penetration depth, crack location, and dimensions of objects.     

Techniques for flexible image/video resolution conversion with heterogeneous terminals

Multimedia capturing and display devices of different resolutions and aspect ratios can be easily connected by networks and, thus, there is a great need to develop techniques that facilitate flexible image/video format conversion and content adaptation among these heterogeneous terminals. Quality degradation due to downsampling, up-sampling, coding/decoding, and some content adaptation mechanism (say, image mosaicking) in the transmission process is inevitable. It is desirable that multimedia contents can be easily captured, displayed, and seamlessly composed. Challenges and techniques to achieve this goal are reviewed first. Then, two specific topics, i.e., image/video mosaicking and super resolution (SR) conversion, are highlighted. As compared with previous work developed for these problems, the challenge under the current context is to strike a balance between low computational complexity and high quality of resultant image/video. Several new developments along this line are discussed     

Feasibility study on cellular network analysis with patterned cell culture microdevice

In order to realize cellular network analysis on a chip-based system, our group has been developing a patterned cell culture microdevice with pillars in an array for tapping cells into space surrounded by the pillars. The pillar structures has advantages to trap both adhesive and non-adhesive cells and to precisely control positions of cells and distances between cells for understanding effects of various cell patterns on functions of a cellular network such as cell proliferation, differentiation, and network formation. In this paper, HeLa cell cultivation with the patterned cell culture microdevice having a pillar array fabricated by dry film of thick negative photoresist SU-8 on a glass substrate was executed as a feasibility study on a cellular network analysis. The results revealed that the device performance was found to be enough to culture HeLa cells for more than 48 h. In addition, relative extensibility of blocks of multiple cells compared with single cells tapped on the device was observed. Thus, the patterned cell culture microdevice proposed here could be applicable to analysis of cellular functions.     

Improvement of strength distribution inside slab concrete by vacuum dewatering method

The strength and hardness of concrete slab surface is considered significantly affected by bleeding of concrete. It has been reported that dewatering by vacuum processing is quite effective to obtain high density of concrete. The method, however, has not been successfully used for the concrete work in the field of building construction, compared with that of civil engineering works in Japan. In the present study, firstly the state of the art concerning vacuum dewatering method is reviewed and the newly improved vacuum dewatering method is introduced. Then the effect of the proposed method on concrete properties of slab is examined by a series of experiments in order to find more reasonable and effective way in the application of the proposed method.     

Properties of bifunctional phosphonate fibers derived from chloromethylstyrene grafted polyolefin fibers

Bifunctional fibers containing phosphonate and sulfonate were derived from chloromethylstyrene grafted polyolefin fibers (PPPE-g-CMS) by phosphorylation and subsequent sulfonation reactions. It was clarified that phosphorylation of PPPE-g-CMS by Arbusov reaction is more suitable than one by the reaction with PCl₃ in the presence of AlCl₃, because the latter damaged fibers and gave phosphinate groups in addition to phosphonate ones. Then, bifunctional fibers containing phosphonate and sulfonate groups were prepared by sulfonation of monofunctional phosphonate fibers obtained via Arbusov reaction with chlorosulfonic acid. The metal ion selectivity of the bifunctional fibers was governed by both phosphonate and sulfonate groups. In addition, bifunctional fibers gave much more excellent kinetic performances in column-mode uptake of Cu(II) than the monofunctional phosphonate fibers and resin.