Feasibility study on cellular network analysis with patterned cell culture microdevice

In order to realize cellular network analysis on a chip-based system, our group has been developing a patterned cell culture microdevice with pillars in an array for tapping cells into space surrounded by the pillars. The pillar structures has advantages to trap both adhesive and non-adhesive cells and to precisely control positions of cells and distances between cells for understanding effects of various cell patterns on functions of a cellular network such as cell proliferation, differentiation, and network formation. In this paper, HeLa cell cultivation with the patterned cell culture microdevice having a pillar array fabricated by dry film of thick negative photoresist SU-8 on a glass substrate was executed as a feasibility study on a cellular network analysis. The results revealed that the device performance was found to be enough to culture HeLa cells for more than 48 h. In addition, relative extensibility of blocks of multiple cells compared with single cells tapped on the device was observed. Thus, the patterned cell culture microdevice proposed here could be applicable to analysis of cellular functions.     

AC side harmonic and phenomena accompanying DC-injection of utility-interactive PV system

The experiments investigated phenomena related to direct contact between the DC output of a PV array and the AC power from the utility grid. The results show that the DC power flows through the distribution transformers (DC-injection) saturating their magnetic circuits. The saturation of magnetic circuits makes peak currents, incorporating a large portion of even harmonics, flow through the high-voltage side of the distribution transformer, adding the level of harmonic distortion of its exciting current. With the increase of injecting DC-current to the utility grid, peak currents at the primary side of distribution transformer increases the most, and even among the same effective (rms) values, the increase of primary side current is larger than that of the secondary side current.     

A simple approach to observe non-conductive hydrated materials with FE-SEM: Case study on porous hydroxyapatite green bodies

The purpose of this study is to develop a simple method to observe the surface morphology of non-conductive material in its hydrated condition. Here porous hydroxyapatite (HAp) green body prepared by gelcasting process was considered as a case study, and, the resultant body was subsequently treated with hydrophilic ionic liquid (IL). The surface morphology and the pore structure of the IL-treated porous HAp green body were successfully observed even in hydrated condition without any charging using field emission scanning electron microscope (FE-SEM). Results showed that the pore diameter from 300 to 600 μm in as-prepared green body was reduced to 100–300 μm in the sample sintered at 1000 °C. Raman results showed that the IL forms weak hydrogen bond with water molecules within the sample and, that prevents from drying in vacuum condition. In addition, the IL acts as a conducting media for HAp ceramics to be observed under FE-SEM.     

Improvement of strength distribution inside slab concrete by vacuum dewatering method

The strength and hardness of concrete slab surface is considered significantly affected by bleeding of concrete. It has been reported that dewatering by vacuum processing is quite effective to obtain high density of concrete. The method, however, has not been successfully used for the concrete work in the field of building construction, compared with that of civil engineering works in Japan. In the present study, firstly the state of the art concerning vacuum dewatering method is reviewed and the newly improved vacuum dewatering method is introduced. Then the effect of the proposed method on concrete properties of slab is examined by a series of experiments in order to find more reasonable and effective way in the application of the proposed method.     

XPS analysis of CdS/CuInSe2 heterojunctions

CdS/CuInSe₂ (CIS) heterojunctions were investigated by XPS analysis. An In-excess layer which may form an ordered vacancy compound (OVC) was present at the as-deposited CIS surface and it remained after chemical bath deposition of a CdS layer. The In-excess layer was removed by preferential etching with NH₃ aqueous solution. This result implies that the surface of the as-deposited CIS film was converted from the OVC with n-type conductivity into the CIS with p-type by NH₃ treatment. The conduction band offsets at the CdS/p-CIS and CdS/n-OVC were determined to be 1.0 and 0.3 eV, respectively. The CIS solar cells fabricated with n-OVC surface layer exhibited higher cell efficiencies than those fabricated with p-CIS surface layer.     

Fatigue crack initiation and growth under mixed mode loading in aluminum alloys 2017-T3 and 7075-T6

Fatigue crack initiation and growth characteristics under mixed mode loading have been investigated on aluminum alloys 2017-T3 and 7075-T6, using a newly developed apparatus for mixed mode loading tests. In 2017-T3, the fatigue crack initiation and growth characteristics from a precrack under mixed mode loading are divided into three regions—shear mode growth, tensile mode growth and no growth—on the ΔK_I-ΔK_II plane. The shear mode growth is observed in the region expressed approximately by ΔK_II > 3MPa√m and ΔK_II/ΔK_I > 1.6. In 7075-T6, the condition of shear mode crack initiation is expressed by ΔK_II > 8 MPa√m and ΔK_II/ΔK_I > 1.6, and continuous crack growth in shear mode is observed only in the case of ΔK_I/ΔK_II, 0. The threshold condition of fatigue crack growth in tensile mode is described by the maximum tensile stress criterion, which is given by Δσ_θmax √2πr 1.6MPa√m, in both aluminum alloys. The direction of shear mode crack growth approaches the plane in which K_I decreases and K_II increases towards the maximum with crack growth. da/dN-ΔK_II relations of the curved cracks growing in shear mode under mixed mode loading agree well with the da/dN-ΔK_II relation of a straight crack under pure mode II loading.     

Properties of bifunctional phosphonate fibers derived from chloromethylstyrene grafted polyolefin fibers

Bifunctional fibers containing phosphonate and sulfonate were derived from chloromethylstyrene grafted polyolefin fibers (PPPE-g-CMS) by phosphorylation and subsequent sulfonation reactions. It was clarified that phosphorylation of PPPE-g-CMS by Arbusov reaction is more suitable than one by the reaction with PCl₃ in the presence of AlCl₃, because the latter damaged fibers and gave phosphinate groups in addition to phosphonate ones. Then, bifunctional fibers containing phosphonate and sulfonate groups were prepared by sulfonation of monofunctional phosphonate fibers obtained via Arbusov reaction with chlorosulfonic acid. The metal ion selectivity of the bifunctional fibers was governed by both phosphonate and sulfonate groups. In addition, bifunctional fibers gave much more excellent kinetic performances in column-mode uptake of Cu(II) than the monofunctional phosphonate fibers and resin.     

Separation of PRMMC into matrix alloy and reinforcements by nozzle filtering method

The SiC_P/Al–4 mass%Cu alloy composites fabricated by a low-pressure infiltration process (LPI process) were remelted and separated by nozzle filtering method. In the separation process, the PRMMC specimen was placed in a container with a small nozzle at the bottom. The molten PRMMC was forced to flow out through the nozzle by applying a certain pressure of Ar gas. Most of the molten matrix alloy flowed out through the nozzle and the remainder in the container consisted of SiC particles and a part of the matrix alloy. The particle volume fraction of the remainder was higher than that of the original PRMMC and the remainder would work as a filter to separate SiC particles from the matrix alloy melt. When nozzle tip angle was ranged from 60° to 120°, about 80% of matrix alloy in the PRMMC was separated and few SiC particles were observed in the separated matrix alloy. The surface of recovered SiC particles became slightly roughened due to the reaction with the molten matrix during the separation process. However, this is not expected to affect their reuse.     

Oxygen Diffusion in Single- and Poly-Crystalline Zinc Oxides

¹⁸O diffusion coefficients were measured in zinc oxide ceramics using a secondary ion mass spectrometer. The results are interpreted as indicating extrinsic behavior. The values of the lattice diffusion coefficients with higher valence dopants compared with zinc ions are greater than lower valence dopant such as lithium ions. Using the data at deeper depth, the grain boundary diffusivity of oxide ions was also evaluated. Although the lattice diffusion coefficients varied by two orders of magnitude, the products of grain boundary width and grain boundary diffusion coefficient were less sensitive to the type of dopants.     

Sedimentation study on the binding of fibrinogen or of antithrombin III with acidic polysaccharides including heparin

Summary The binding of fibrinogen with heparin and dextran sulfates, and of antithrombin III with heparin and dextran sulfate were investigated by sedimentation velocity method. From the measurement of fibrinogen-acidic polysaccharide systems, it was confirmed that heparin and low molecular weight dextran sulfate(DSC) forms soluble complexes with fibrinogen, though the amount bound of the latter was rather small compared with high molecular weight dextran sulfate(DSD). Antithrombin III was also found to be bound by heparin and DSC. The numbers of heparin molecules bound to one molecule of fibrinogen and antithrombin III were estimated to be 4.2 and 0.3, respectively.