Inhibitory effect of zinc on beta-hexosaminidase release from RBL-2H3 cells by synthetic chemicals

The effects of foods and chemicals related to food hygiene on degranulation were evaluated using a method for assaying the enzyme activity of beta-hexosaminidase as an index of chemical mediator release from RBL-2H3 cells in vitro. Using a previously developed assay system, we had found a large number of inhibitors and promoters of degranulation of RBL-2H3 cells. In the present study, we examined the inhibitory effect of zinc chloride on the degranulation (beta-hexosaminidase release) from RBL-2H3 cells with or without antigen in the presence of the degranulation-promotive chemicals, namely, 4 food additives, 7 pesticides and 2 veterinary drugs. These promotive chemicals were classified into two types on the basis of inhibitory profile by zinc chloride: 1) those which showed marked degranulation-inhibitory action when the cells were stimulated with antigen, such as butylhydroxyanisole, dibutylhydroxytoluene, EPN, cis- and trans-permethrin, prothiofos, pyridaben, terbufos, 2) those which showed marked degranulation-inhibitory action whether the cells were stimulated with antigen or not, such as butyl p-hydroxybenzoate, o-phenylphenol, bitertanol, salinomycin. In conclusion, zinc had a dramatic inhibitory effect on enhanced degranulation induced by synthetic chemicals in vitro.     

粉末冶金结构零件材料的泊松比

研究了粉末冶金机械零件使用的烧结材料的杨氏模量、切变模量及泊松比与孔隙度的关系.制备了三种钢粉,在不同条件下进行了压制、烧结与热处理.孔隙度对杨氏模量、切变模量及泊松比的影响最大.特别是泊松比还受孔隙形状的影响,而孔隙形状随粉末类型、烧结温度与烧结气氛及热处理条件而变化.对于大部分实际应用的粉末组成来说,烧结气氛对经烧结和热处理后材料的泊松比影响不大.对于部分预合金化粉末(Fe4%Ni1.5%Cu0.5%Mo)+0.8%石墨,只有在孔隙度低于20%时,烧结温度对泊松比与孔隙度的关系才有影响.在这种情况下.提出了烧结与热处理试样泊松比与孔隙度关系的较简单近似方程:在烧结温度1 423K下,v=0.300-0.266P+0.579P2;在烧结温度1 523K下,v=0.304-0.264P+0.548P2.     

Additive effects of methyl ammonium bromide or formamidinium bromide in methylammonium lead iodide perovskite solar cells using decaphenylcyclopentasilane

Journal of Materials Science: Materials in Electronics - Fabrication and characterization of methylammonium lead iodide perovskite solar cells incorporated with methylammonium bromide (MABr),...     

Digital Computer Control of a Research Reactor

This report describes a feasibility experiment for a fully automatic operation of Hitachi Training Reactor, emploving an digital computer control system. The system consists of a small control computer (2K words), an input-output peripherals, 3 BF3 counters and a countrol rod mechanism driven by a pulse motor.     

Hot Corrosion Behavior and Microstructural Change of Al-Gradient CoNiCrAlYSi Coatings, Produced by LVPS and Diffusional Processes

Conventional and gradient CoNiCrAlYSi coatings were produced by using low vacuum plasma spray and an additional step of diffusional over aluminizing (pack cementation) techniques on an Inconel-738 substrate. Hot corrosion of these coatings was investigated using Na₂SO₄–20wt%NaVO₃ molten salt at 880?°C for 800?h. Hot corrosion rate was determined by measuring the weight gain of the specimens at regular intervals for a duration of 20?h. X-ray diffraction, field emission scanning electron microscopy and electron probe micro analysis techniques were used to determine the nature of phases, investigation of the thermally grown oxide, examination of the surface attack and determination of the elemental distribution. The gradient coating showed better performance by re-healing alumina scale due to its possession of more β phase as Al reservoir. Results indicated that pack cementation process caused an increase in amount of aluminum-rich β phase and better hot corrosion properties of gradient coatings owing to the Al enrichment in the outer layer and rapid formation of protective oxide on the surface.     

Real-time 3D microtubule gliding simulation accelerated by GPU computing

A microtubule gliding assay is a biological experiment observing the dynamics of microtubules driven by motor proteins fixed on a glass surface. When appropriate microtubule interactions are set up on gliding assay experiments, microtubules often organize and create higher-level dynamics such as ring and bundle structures. In order to reproduce such higher-level dynamics on computers, we have been focusing on making a real-time 3D microtubule simulation. This real-time 3D microtubule simulation enables us to gain more knowledge on microtubule dynamics and their swarm movements by means of adjusting simulation parameters in a real-time fashion. One of the technical challenges when creating a real-time 3D simulation is balancing the 3D rendering and the computing performance. Graphics processor unit (GPU) programming plays an essential role in balancing the millions of tasks, and makes this real-time 3D simulation possible. By the use of general-purpose computing on graphics processing units (GPGPU) programming we are able to run the simulation in a massively parallel fashion, even when dealing with more complex interactions between microtubules such as overriding and snuggling. Due to performance being an important factor, a performance model has also been constructed from the analysis of the microtubule simulation and it is consistent with the performance measurements on different GPGPU architectures with regards to the number of cores and clock cycles.     

Electrochemically reduced Pt oxide thin film as a highly active electrocatalyst for direct ethanol alkaline fuel cell

The Pt oxide thin film and Pt thin film were prepared by reactive sputtering and the electrocatalytic activity of the ethanol oxidation reaction was investigated in a KOH solution for developing the alkaline direct ethanol fuel cells. After electrochemical reduction by passing a cathodic electric charge, the Pt oxide thin film showed 29 times larger ethanol oxidation current than the Pt thin film. This superior activity was caused by an increase in the electrochemical active surface area and the existence of residual oxygen, which was confirmed by cyclic voltammetry and XPS measurement. Due to the contribution of the residual oxygen, the rate-determining step of the ethanol oxidation reaction might change, because the Tafel slope of the Pt oxide thin film during the ethanol oxidation reaction was changed by electrochemical reduction. Despite the total Pt amount in the Pt oxide thin film being smaller than that in the Pt thin film, the Pt oxide thin film showed excellent ethanol oxidation activity. Therefore, the Pt oxide treated by electrochemical reduction may be a promising anode catalyst for the direct ethanol fuel cells.     

Evaluation of absorption of micro-droplets on paper for creation of paper-based microstructures

This study clarifies the absorption behavior of micro-droplets of water on treated paper to support the design of functional microstructures, such as electronics and micro-fluid channels, on paper. The period of time between when a micro-droplet of water ejected from an ink-jet head lands on the paper’s surface and its complete disappearance by absorption was defined as the micro-sizing degree (MSD), and an MSD measurement method was established. The MSD was evaluated using microscopic high-speed video images of the side view recorded every millisecond. Several grades of commercially available ink-jet paper media and laboratory sheets having different levels of water repellency prepared from a pulp and a sizing agent were examined. The MSD of commercial ink-jet papers, which are known to absorb water very quickly, was 3–6 ms. Weakly sized laboratory sheets exhibited a lower MSD of 2–3 ms. The absorption behavior was analyzed in terms of the capillary pressure with and without the Laplace pressure; the theoretical and experimental results agreed moderately well. The results indicated that the Laplace pressure cannot be neglected in the analysis. The MSD of a wet surface where a preceding micro-droplet had already landed was higher than that on a dry or partially wet surface, presumably because water remains inside pores for an unexpectedly long time.