Electromagnetic Shielding Properties of Woodceramics Made from Wastepaper

Woodceramics are new porous carbon materials, which are made by impregnating woody materials with phenol resin and then thermoformed in a vacuum furnace and these have been shown to have electromagnetic shielding properties. In the recycling of wastepaper, ways of using the wastepaper other than for paper pulp are needed to be developed. In this study, we made Woodceramics from handbill advertisement paper and telephone directory paper, and measured their electromagnetic shielding properties in order to find new uses for wastepaper. The results showed that the Woodceramics made from wastepaper had an electric shielding effectiveness of 30 dB for 100 MHz and 40 to 43 dB for 300 MHz or higher, and had a magnetic shielding effectiveness of 30 dB for 100 MHz and 37 dB for about 400 MHz. An electric equivalent circuit of the pore model in the Woodceramics is introduced. In addition, it is proposed that the excellent electromagnetic shielding effectiveness of the Woodceramics is caused by dielectric loss.     

Photopolymerization synthesis of poly(N-isopropylacrylamide) hydrogels

Poly(N-isopropylacrylamide) (NIPAAm) gels were formed by photopolymerization of NIPAAm in the absence of a crosslinker using a water solvent at 25°C. Factors affecting formation were the wavelength region of irradiated light, the type of photoinitiators, and the concentrations of the photoinitiator and monomer. A high-pressure mercury lamp (400 W) was used as a light source. An NIPAAm concentration of 10 wt % and irradiation time of 15 h was used for the photopolymerization. The gel (68% yield) was formed when the quartz glass system was used, but no gelation was observed for the Pyrex glass system that transmits light with π > 290 nm. The gel (100% yield) was easily formed, even in the latter system, when 30 mmol/L of hydrogen peroxide and potassium persulfate were used as the photoinitiator. Water soluble photoinitiators such as ferric chloride and sodium anthraquinone-2,7-disulfonate were not effective for the gel formation. Yield of the gel increased with increasing the potassium persulfate concentration (1–30 mmol/L), but it decreased when a high concentration of hydrogen peroxide (60 mmol/L) was used. The gel yield increased with the NIPAAm concentration (5–20 wt %). The degree of swelling of the resultant poly(NIPAAm) gels, which was measured by immersing the gels in water at various temperatures (0–50°C) for 24 h, steeply decreased at about 30°C with increasing temperature, exhibiting a temperature-responsive character. The gels swelled and shrank in water below and above the temperature, respectively. The extent of the character depended on the concentrations of hydrogen peroxide and monomer. The formation mechanism of the gel in the photopolymerization of NIPAAm using hydrogen peroxide photoinitiator was discussed. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:1313–1318, 1997     

Silver(I)-Ion-Mediated Cytosine-Containing Base Pairs: Metal Ion Specificity for Duplex Stabilization and Susceptibility toward DNA Polymerases

Spectroscopic characterization of Ag^I-ion-mediated C-Ag^I-A and C-Ag^I-T base pairs found in primer extension reactions catalyzed by DNA polymerases was conducted. UV melting experiments revealed that C-A and C-T mismatched base pairs in oligodeoxynucleotide duplexes are specifically stabilized by Ag^I ions in 1:1 stoichiometry in the same manner as a C-C mismatched base pair. Although the stability of the mismatched base pairs in the absence of Ag^I ions is in the order C-A≈C-T>C-C, the stabilizing effect of Ag^I ions follows the order C-C>C-A≈C-T. However, the comparative susceptibility of dNTPs to Ag^I-mediated enzymatic incorporation into the site opposite templating C is dATP>dTTP≫dCTP, as reported. The net charge, as well as the size and/or shape complementarity of the metal-mediated base pairs, or the stabilities of mismatched base pairs in the absence of metal ions, would be more important than the stability of the metallo-base pairs in the replicating reaction catalyzed by DNA polymerases.     

Electrochemical corrosion and materials properties of reactively sputtered TiN/TiAlN multilayer coatings

TiN/TiAlN multilayers of 2 μm thickness were successfully prepared by reactive DC magnetron sputtering method. XRD pattern showed the (1 1 1) preferential orientation for both TiN and TiAlN layers. XPS characterization showed the presence of different phases like TiN, TiO₂, TiON, AlN and Al₂O₃. Cross sectional TEM indicated the columnar growth of the coatings. The average RMS roughness value of 4.8 nm was observed from AFM analysis. TiN/TiAlN coating showed lower friction coefficient and lower wear rate than single layer coatings. The results of electrochemical experiments indicated that a TiN/TiAlN multilayer coating has superior corrosion resistance in 3.5% NaCl solution.     

Effects of dietary lipids on daunomycin-induced nephropathy in mice: comparison between cod liver oil and soybean oil

Although it is well known that dietary lipids affect the course of glomerulonephritis in rats and humans, the precise mechanisms involved have not been fully elucidated. The aim of this study was to investigate the effects of different types of dietary lipids (fish oil and vegetable oil) on daunomycin (DM)-induced nephropathy in mice fed on soybean oil (SO) or cod liver oil (CLO). Urinary protein excretion, serum albumin, creatinine, total cholesterol, and TG were measured, and glomerular histological changes were evaluated. Antioxidant enzymes were also measured, along with the levels of lipid peroxide, GSH, thromboxane (Tx) B_2′ and 6-keto prostaglandin F_1α in renal cortical tissue. Dietary CLO significantly reduced urinary albumin excretion and ameliorated the histological changes induced by DM. The increase of tissue lipid peroxide levels seen in SO-fed mice was suppressed in CLO-fed mice, whereas CLO-fed mice showed higher GSH levels than SO-fed mice throughout the experiment. In addition, renal tissue GSH peroxidase activity was significantly higher at 72 h after DM injection in CLO-DM mice than in SO-DM mice. Both renal cortical TxB₂ and 6-keto PGF_1α levels were significantly lower in CLO-DM mice than in SO-DM mice. These results suggest that inhibition of oxidative damage by dietary CLO played an important role in the prevention of DM nephropathy in this mouse model. The effect of CLO was closely associated with the inhibition of Tx synthesis.     

Piezoresistivity of Hi-Nicalon Type-S Silicon Carbide-Based Fiber

Piezoresistivity effect of a silicon carbide-based ceramic fiber (Nicalon family) was evaluated when a single fiber was buried at the tensile plane in a plastic rectangular bar subjected to bending to apply a stable tensile strain. Electrical resistivity change during the bending was monitored by a digital high-resistance meter. From the fracture strain, Young's modulus, and the resistivity change, the piezoresistance coefficient is calculated to be 1.6 × 10⁻¹¹ m²/N, which is in agreement with the reported value for silicon carbide single crystals and our own reported value for polycrystalline silicon carbide ceramics.     

Template synthesis of novel porous carbons using various types of zeolites

As previously reported, high surface area microporous carbons with long-range order can be synthesized by using zeolite Y as a template. In this work, an attempt is made to synthesize porous carbon using several other types of zeolites (zeolite β, ZSM-5, mordenite and zeolite L). Special attention is paid to whether the structural regularity of each zeolite can be transferred to the carbon structure as well as with the case of zeolite Y. The carbon filling method was then examined to see which gives the highest regularity to the carbon structure. It has been found that the optimum carbon filling method for zeolite Y is not an optimum one for the other zeolites and the degree of the regularity of long-range ordering in the carbons strongly depends on zeolite type. The order of the regularity in the resultant carbons is zeolite β>>zeolite L>mordenite>ZSM-5. The effect of zeolite type on the regularity is discussed in relation to the size and the shape of the zeolite channels.     

Effect of polymer density on polyethylene hollow fiber membrane formation via thermally induced phase separation

Microporous high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE) hollow fiber membranes were prepared from polyethylene–diisodecyl phthalate solution via thermally induced phase separation. Effect of the polyethylene density on the membrane structure and performance was investigated. The HDPE membrane showed about five times higher water permeability than the LDPE membrane because it had the larger pore and the higher porosity at the outer membrane surface. The formation of the larger pore was owing to both the initial larger structure formed by spinodal decomposition and the suppression of the diluent evaporation from the outer membrane surface due to the higher solution viscosity. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 471–474, 2004