Compressive sensing based high-resolution passive bistatic radar

Passive bistatic radar (PBR) systems using different communication signals can only offer low-resolution target detection due to their inherent low bandwidth. In this paper, compressive sensing (CS) is applied to multichannel FM and GSM PBR to achieve improved range-Doppler resolutions and avoid some limitations of classical multiband PBR processing. In CS context, block-structured time-domain dictionary which is formed from multichannel signals suffers from coherence when fine range resolution is employed. To overcome such a pitfall, this work first transforms the dictionary to spectral domain where only the most important spectral components are retained. Principle component analysis followed by a whitening method are then applied to this spectrally transformed data in order to reduce the dimensionality of problem, thereby reducing the dictionary size and most importantly fulfilling the required condition of dictionary incoherence for better CS-based recovery. Two different block-structured dictionary formations are tested. The performance of the recovery of spatially close targets, in both FM and GSM PBR setups, are reported.     

Three-dimensional computational micro-mechanical model for woven fabric composites

This work presents a computational material model for plain-woven fabric composite for use in finite element analysis. The material model utilizes the micro-mechanical approach and the homogenization technique. The micro-mechanical model consists of four sub-cells, however, because of the existing anti-symmetry only two sub-cells have to be homogenized for prediction of the elastic material properties. This makes the model computationally very efficient and suitable for large-scale finite element analysis. The model allows the warp and fill yarns not to be orthogonal in the plane of the composite ply. This gives the opportunity to model complex-shaped composite structures with different braid angles. General homogenization procedure is employed with two levels of property homogenization. The model is programmed in MATLAB software and the predicted material properties of different composite materials are compared and presented. The material model shows good capability to predict elastic material properties of composites and very good computational efficiency.     

Hybrid features of spatial domain and frequency domain for person identification through ear biometrics

Biometrics proved to be very efficient, more natural and easier for users than traditional methods of human identification. This paper presents an accurate biometric system based on human ear. Many features have been extracted in the spatial domain such as area of the ear, ear edge points, and widths of ear in different places. Those features have been extracted in the enrollment stages and stored as templates. Using a comparing technique such as Euclidean distance for each feature or for the whole features gives different correct recognition rates, which reaches 88.2%. Using spatial domain features as well as frequency domain features such as FFT and DCT coefficients raises our recognition rate to 92% of success. 100% of correct recognition can be achieved by using the average values of five samples instead of three samples for each person. The article is published in the original. Farid Saleh. Graduated from Telecommunications and Electronics Department, Faculty of Engineering of Helwan University, Egypt in 2001. He is presently a M.Sc. student at the same university. His current research interests include image processing and pattern recognition. Alaa Hamdy. Was born in Giza in Egypt, on August 17, 1966. He graduated from the Telecommunications and Electronics Department, Faculty of Engineering and Technology of Helwan University, Cairo, Egypt in 1989. He received the M.Sc. degree in computer engineering from the same university in 1996 and the Ph.D. degree from the Faculty of Electrical Engineering, Poznan University of Technology, Poland in 2004. Currently he is working as a lecturer in the Faculty of Engineering of Helwan University. His special fields of interest include image processing, pattern analysis, and machine vision. Fathy Zaki. Is an associate professor of Microelectronics, Electronics Department, Faculty of Engineering of Helwan University.     

Notes on integral performance indices in fractional-order control systems

Integral performance indices as quantitative measures of the performance of a system are commonly used to evaluate the performance of designed control systems. In this paper, it is pointed out that due to existence of non-exponential modes in the step response of a fractional-order control system having zero steady state error, integral performance indices of such a system may be infinite. According to this point, some simple conditions are derived to guarantee the finiteness of different integral performance indices in a class of fractional-order control systems. Finally, some numerical examples are presented to show the applicability of the analytical achievements of the paper.     

Sandwich shell finite element for dynamic explicit analysis

The contribution of this paper consists of new development of transverse shear stresses through the thickness and finding an expression for the critical time step for explicit time integration of layered shells. This work presents the finite element (FE) formulation and implementation of a higher‐order shear deformable shell element for dynamic explicit analysis of composite and sandwich shells. The formulation is developed using a displacement‐based third‐order shear deformation shell theory. Using the differential equilibrium equations and the interlayer requirements, special treatment is developed for the transverse shear, resulting in a continuous, piecewise quartic distribution of the transverse shear stresses through the shell thickness. Expressions are developed for the critical time step of the explicit time integration for orthotropic homogeneous and layered shells based on the developed third‐order formulation. To assess the performance of the present shell element, it is implemented in the general non‐linear explicit dynamic FE code DYNA3D. Several problems are solved and results are presented and compared to other theoretical and numerical results. Copyright © 2002 John Wiley & Sons, Ltd.     

Optical equalization to combat the effects of laser chirp and fiberdispersion

Optical equalizers capable of combating the effects of laser chirp and fiber chromatic dispersion on high-speed long-haul fiber-optic communication links at 1.5 μm are described. They consist of both reflective and transmissive cavity structures. The equalizers are adaptive in the sense that the position of their periodic frequency responses are optimally adjusted in real time. The equalizers are evaluated by using computer simulation routines based on the rate equations for intensity-modulated lasers. It is shown that, by using equalizers of the type proposed, the receiver data eyes remain open well beyond where they would close without equalization     

Optical equalization for high-bit-rate fiber-optic communications

An optical equalizer consisting of a reflective cavity structure, which gives an all-pass amplitude response and a frequency-selective delay response, is described. Equalizer performance is evaluated for links using external modulation with chirp absent. It is also shown that, by using equalizers of the type described, the receiver data eye can remain open for distances more than twice those where the unequalized system becomes inoperable     

On the Computational Cutoff Rate, R0for the Peak-Power-Limited Gaussian Channel

The "computational cutoff rate," R0, represents a practical measure of the maximum reliable data rate that can be achieved by coding over a given communication channel using a given modulation format, in contrast with the "channel capacity,"C, which represents an idealized theoretical limit on the achievable data rate. Moreover, designing signal sets with good error probabilities using the R0criterion results in a mathematical problem that is much more tractable than that obtained by using the probability of error itself as a criterion. Both of the above reasons establish the importance of R0in communications theory. This paper starts with a brief tutorial background, which reveals the origin and the significance of R0. Next, the problem of achieving R0over the additive white Gaussian noise (AWGN) dispersive or nondispersive channel, using quadrature-amplitude modulation (QAM) with a peakpower constraint, is addressed. The major result is that, for both cases, the optimum transmission signal set is chosen from a discrete distribution. The solution is derived in detail for the peak-power-limited nondispersive channel, where it is shown that the optimum QAM symbols are selected independently from a probability distribution that is uniform in the phase and discrete in the radius. The solution for the corresponding peak-power-limited dispersive channel is obtained only asymptotically, for large signal-to-noise ratio (SNR), where it is shown that the QAM symbols are selected independently from a uniform distribution within a disk in the complex signal space.     

Fruit‐based functional foods I: production of food‐grade apple fibre ingredients

With the increased consumer interest in fibre‐enriched functional foods, industrial‐scale methods for functional fibre production are demanded. The development of a food‐grade fibre preparation method at lab scale that is feasible for industrial scale‐up is a pre‐requisite. This paper describes two lab‐scale fibre preparation methods that have potential to be scaled up to industrial setting for the production of fruit fibres containing desired bioactives and functionality. The two methods, one aqueous and the other ethanolic, were used to isolate fibres from Granny Smith apples (Malus domestica Borkh cv. ‘Granny Smith’). In the aqueous method, ground apple tissues were suspended in HEPES buffer (20 mM, pH 6.5), and then mechanically ruptured using an Ultra‐Turrax and ring grinder. Between steps, the cell‐wall materials were washed with the HEPES buffer. In the ethanolic method, ground apple tissues were stirred in 72% ethanol at 4 °C, filtered, re‐suspended in 72% ethanol and then washed. Microscopic examination and chemical analysis were performed on the resultant fibres. The aqueous method produced natural and uniform dietary fibres in the form of plant cell walls containing 0.282 g uronic acid per g dried fibre. By comparisons, the ethanolic method produced crude fibres containing only 0.182 g uronic acid per g dried fibre, the lower uronic acid content indicating the presence of impurities. Thus, the aqueous method appeared to be advantageous in terms of the retained pectic polysaccharide content and cost‐effectness for industrial scale‐up. Further characterisation using Folin‐Ciocalteu assay and high performance liquid chromatography indicates that the fibres obtained by the aqueous method contained significant amounts of phenolic compounds (2.6 mg catechin equivalent per g dried fibre). These results suggest that fibres obtained by the aqueous method may be more suitable for functional food applications where fibres with high pectic polysaccharide and beneficial phenolic antioxidants are preferred.     

Corrosion inhibition by naturally occurringsubstances—I. The effect of Hibiscus subdariffa (karkade) extract on the dissolution of Al and Zn

The thermometric, the weight-loss and the galvanostatic polarization techniques wereused to establish the inhibition of the dissolution of Al and Zn in HCl and NaOH by different concentrations of aqueous extract of Hibiscus subdariffa (Karkade). The extent of corrosion inhibition as measured by the three techniques is comparable. The results indicated that the additive acts by way of adsorption on both cathodic and anodic corrosion areas. Curves representing the variation of the reaction number (R.N.), in thermometric experiments, and the decrease in weight as a function of the concentration of the additive, are invariably sigmoid in nature. When present in enough amounts, the additive decreases the dissolution rate by as much as 85 per cent of the value recorded in its absence.