Design of a low-density wood-cement particleboard for interior wall finish

Gypsum boards form a very large part of the building walls and ceilings finishing market. However, they have poor screw-withdrawal resistance, low hardness and are highly sensitive to moisture. The objective of this study was to determine whether it is possible to make wood-cement particleboards of the same density as gypsum boards while avoiding these drawbacks.Wood-cement particleboards were made by pouring the wood-cement paste in a mould. This was made possible by adding a viscosity modifying mixture to the mixing water and a set accelerating mixture to improve wood/cement compatibility. The mechanical properties and surface quality of the wood-cement particleboards were improved by using, on the board surfaces, paper sheets that were the same as those used on gypsum boards.The average specific gravity of the wood-cement particleboards was the same as gypsum boards, at 0.7. The average bending modulus of rupture obtained for the wood-cement particleboards was 10 MPa in the finishing paper principal direction and 5 MPa in the other direction compared to 5.5 MPa and 1.6 MPa respectively for gypsum boards. The average screw-withdrawal resistance of wood-cement particleboards was 570 N, that is, 1.7 times higher than for gypsum boards.     

Analysis of muscle length effect on an S type motor-unit fractional multi-model

Muscle models are useful in bio-inspired robotic, because they allow to reproduce accurately natural motion. When they are used for robotic issue, they need to be compact and embeddable. The non-integer model order has the advantage to ensure a parametrical parsimony that permits to implant it easily on an embedded system. Thus, a fractional multi-model of muscle was identified and presented in later paper. This model is able to predict the response of a motor unit to an electrical stimulation, considering isometric contractions (that is to say, muscle length is constant). There are three different physiological types of motor unit (FR, FF, and S). The aim of this work is to study muscle length impact on the multi-model and the limitations of the linear multi-model. Previous paper was published using FR type motor unit. In this paper, the results of the study using S type motor unit are presented.     

Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds

In this paper, we introduce an original shape representation approach for post-springback characterization based on the automatic generation of parameterized level set functions. The central idea is the concept of the shape manifold representing the design domain in the reduced-order shape-space. Performing Proper Orthogonal Decomposition on the shapes followed by using the Diffuse Approximation allows us to efficiently reduce the problem dimensionality and to interpolate uniquely between admissible input shapes, while also determining the smallest number of parameters needed to characterize the final formed shape. We apply this methodology to the problem of springback assessment for the deep drawing operation of metal sheets.     

New quadratic solid–shell elements and their evaluation on linear benchmark problems

This paper is concerned with the development of a new family of solid–shell finite elements. This concept of solid–shell elements is shown to have a number of attractive computational properties as compared to conventional three-dimensional elements. More specifically, two new solid–shell elements are formulated in this work (a fifteen-node and a twenty-node element) on the basis of a purely three-dimensional approach. The performance of these elements is shown through the analysis of various structural problems. Note that one of their main advantages is to allow complex structural shapes to be simulated without classical problems of connecting zones meshed with different element types. These solid–shell elements have a special direction denoted as the “thickness”, along which a set of integration points are located. Reduced integration is also used to prevent some locking phenomena and to increase computational efficiency. Focus will be placed here on linear benchmark problems, where it is shown that these solid–shell elements perform much better than their counterparts, conventional solid elements.     

Multiplex real-time PCR Method for the detection and quantification of DNA from the four transgenic soy traits DP-356043-5, DP-305423-1, MON 87701, and BPS-CV127-9 and lectin

According to the release of authorization, several new transgenic soy crops are expected to be present in the harvest of soy beans. In contrast to earlier times, methods for the detection of these transgenic crops are available already in advance. However, these methods are mainly still inefficient single real-time PCR methods. To increase the efficiency of product control, a multiplex quantitative real-time PCR system was developed and characterized for the four new transgenic soy traits DP-356043-5, DP-305423-1, MON 87701 and BPS-CV127-9. It showed amplification efficiency, correlation and sensitivity similar to the single PCR systems applied therein. To evaluate the robustness, an appropriate testing scheme was developed and applied for the first time on this multiplex real-time PCR system. It showed the robust amplification of all analytes also in case where conditions were varied. This system allows relative multiplex quantification and/or delta–delta Ct method quantification and proofed the applicability in routine.     

Characterizing hydrocyclone performance for grit removal from wastewater treatment activated sludge plants

Typically, 15–45% of the mixed liquor (sludge) in biological wastewater treatment plants (WWTPs) consists of inorganic (fixed) suspended solids. A portion of these inorganic compounds is grit (sand) originating from the influent. Grit accumulation impacts WWTP design and operating costs as these unbiodegradable solids reduce the effective treatment capacity of the bioreactor and other unit operations that must be sized to carry this material.The goal of this study was to characterize the performance of a hydrocyclone to selectively separate grit from activated sludge. Laboratory experiments were conducted with a 13 mm diameter Krebs hydrocyclone treating sludge from eight WWTPs. Reduced efficiencies of 17 ± 7% on fixed suspended solids and 9 ± 6% on volatile suspended solids were obtained. Grade efficiency curves enabled the development of a modified definition for cut size useful for this application. The characterization of hydrocyclone performance for grit removal from activated sludge will enable modelling of the process for integration into wastewater treatment simulators used for process performance prediction and design.     

Tree-to-tree variation in stearic and oleic acid content in seed fat from Allanblackia floribunda from wild stands: Potential for tree breeding

We determined whether Allanblackia floribunda, a forest tree species that is valued for the fat extracted from its seeds, could be genetically improved for fruit/seed production by sampling 17–40 fruits from each of 70 trees that were distributed among four sites in wild stands. Fat was extracted from the seeds, and stearic and oleic acid content of the fat was estimated. Highly significant (P < 0.0001) between- and within-tree variation characterised fruits and seed characters. Between-site phenotypic variation was not significant. Stearic and oleic acid percentages in seed fat ranged from 44.16% to 66.12%, and from 24.95% to 48.42% per tree sample, respectively. Moderate repeatabilities were identified in fruit characters and mean seed mass. Moderate positive relationships were found between stearic and oleic acid percentages. Seed fat profiles were not found to vary with other fruit characters. Twenty “plus trees” were selected for breeding.     

Impact of oxygen transport properties on the kinetic modeling of polypropylene thermal oxidation. II. Effect of oxygen diffusivity

The kinetic model, established in a previous article (François‐Heude et al., J. Appl. Polym. Sci., in press) to predict the homogeneous oxidation in iPP films typically thinner than 100 µm, is now extended to simulate the oxidation profiles in thicker plates by coupling the oxygen diffusion and its consumption by the chemical reactions. In this perspective, oxygen transport properties (namely oxygen solubility, diffusivity, and permeability) are measured by permeametry on a reference iPP. These values are compared with an exhaustive compilation of literature data to evaluate their variability among the whole iPP family, which one has been reasonably ascribed to initial differences in polymer morphology, but also to evaluate their consistency, especially their temperature dependence between 20 and 140°C. Failing to simulate oxidation profiles, the kinetic model is then used as an inverse resolution method for estimating more satisfactory values of oxygen transport properties. It is thus evidenced that the crystallinity changes induced by thermal oxidation largely explains the dramatic decrease in oxygen penetration toward the sample core just after the induction period. A strategy aimed for introducing the relationship between the polymer crystalline morphology and oxygen transport properties into the kinetic model is given in the graphical abstract, although the effect of polymer polarity remains to be established prior to this implementation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41562.     

Time‐space PGD for the rapid solution of 3D nonlinear parametrized problems in the many‐query context

This work deals with the question of the resolution of nonlinear problems for many different configurations in order to build a ‘virtual chart’ of solutions. The targeted problems are three‐dimensional structures driven by Chaboche‐type elastic‐viscoplastic constitutive laws. In this context, parametric analysis can lead to highly expensive computations when using a direct treatment. As an alternative, we present a technique based on the use of the time‐space proper generalized decomposition in the framework of the LATIN method. To speed up the calculations in the parametrized context, we use the fact that at each iteration of the LATIN method, an approximation over the entire time‐space domain is available. Then, a global reduced‐order basis is generated, reused and eventually enriched, by treating, one‐by‐one, all the various parameter sets. The novelty of the current paper is to develop a strategy that uses the reduced‐order basis for any new set of parameters as an initialization for the iterative procedure. The reduced‐order basis, which has been built for a set of parameters, is reused to build a first approximation of the solution for another set of parameters. An error indicator allows adding new functions to the basis only if necessary. The gain of this strategy for studying the influence of material or loading variability reaches the order of 25 in the industrial examples that are presented. Copyright © 2015 John Wiley & Sons, Ltd.