Densification of 8Y‐Tetragonal‐Stabilized Zirconia Optoceramics with Improved Optical Properties by Y Segregation

8% Yttria‐stabilized zironcia (8YSZ) transparent ceramics have a wide technological applications. Segregation of the Y around the grain boundaries is favored by slow heating rate. The optimized sintering parameters helped in obtaining transparent ceramics of 8YSZ with a high percentage of cubic phase in addition to the presence of tetragonal phase. HRTEM was used to verify the grain growth suppression and to observe the presence of the cubic phase. The presence of cubic phase has suppressed the grain growth, which increased the transparency in the visible and infrared region without the addition of dopants or by utilizing high pressure.     

Dual,Site‐Specific Modification of Antibodies by Using Solid‐Phase Immobilized Microbial Transglutaminase

Microbial transglutaminase (MTG) was stably solid‐phase immobilized on glass microbeads by using a second‐generation dendronized polymer. Immobilized MTG enabled the efficient generation of site‐specifically conjugated proteins, including antibody fragments, as well as whole antibodies through distinct glutamines and, unprecedentedly, also through lysines with various bifunctional substrates with defined stoichiometries. With this method, we generated dual, site‐specifically modified antibodies comprising a fluorescent probe and a metal chelator for radiolabeling—a strategy anticipated to design antibodies for imaging and simultaneous therapy. Furthermore, we provide evidence that immobilized MTG features higher siteselectivity than soluble MTG.     

Modelling of flocculation using a population balance equation

In this paper, a model based on a population balance equation (PBE) is developed. It aims at reproducing experimental floc size distributions obtained at steady state in a jar-test. The objective is to develop a simple model, based on physical phenomena, and that does not contain any adjustable parameters. Floc size distributions obtained using a part of a particle image velocimetry (PIV) device and image analysis are used to develop mathematical expressions for the aggregation and breakage kernels. A critical volume beyond which breakage is of significant importance is identified and related to the hydrodynamics. Hydrodynamic sequencing allows the distribution of the daughter particles resulting from a breakage event to be established. The model is finally successfully validated against experimental results.     

Electroless ultrasonic functionalization of diamond nanoparticles using aryl diazonium salts

We report a novel and very handful strategy for the functionalization of diamond nanoparticles (NDs), based on the ultrasound-assisted grafting of aryl groups from the electroless reduction of diazonium salts. For this study, 4-nitrobenzenediazonium salt was used as a model molecule and the reaction was investigated in neutral and acidic aqueous media. Spectroscopic evidence for the successful attachment of aryl groups to nanodiamonds (NDs) was given by IR and XPS which clearly detect characteristic NO₂ peaks. Moreover, the absence of any peaks from the ⁺N≡N group in the IR spectra is a clear indication of the chemical reduction of the parent diazonium salt at the surface of NDs. This spontaneous chemical modification of NDs by aryl diazonium salts was confined to the surface of the ND particles; indeed, XRD measurements have shown that the crystalline structure of the bulk of the particles was unaffected. It opens up new possibilities towards the control of the surface chemical composition of NDs using simple protocols operated in very soft conditions, i.e. in water at room temperature. It shows conclusively that the chemistry toolbox of experts interested in nanodiamonds should contain aryl diazonium salts, given their versatility in forming active platforms.     

Model selection, identification and validation in anaerobic digestion: a review

Anaerobic digestion enables waste (water) treatment and energy production in the form of biogas. The successful implementation of this process has lead to an increasing interest worldwide. However, anaerobic digestion is a complex biological process, where hundreds of microbial populations are involved, and whose start-up and operation are delicate issues. In order to better understand the process dynamics and to optimize the operating conditions, the availability of dynamic models is of paramount importance. Such models have to be inferred from prior knowledge and experimental data collected from real plants. Modeling and parameter identification are vast subjects, offering a realm of approaches and methods, which can be difficult to fully understand by scientists and engineers dedicated to the plant operation and improvements. This review article discusses existing modeling frameworks and methodologies for parameter estimation and model validation in the field of anaerobic digestion processes. The point of view is pragmatic, intentionally focusing on simple but efficient methods.     

钛基复合材料的高周疲劳性能研究

研究了TiC粒子增强的钛基复合材料的室温轴向高周疲劳性能。测试Kt=1的试样时采用的试验频率为76Hz，R＝0．06和R＝－1时，复合材料的室温疲劳强度分别为594MPa和494MPa。试验结果表明TiC粒子增强的钛基复合材料的室温高周疲劳性能与细晶组织的Ti-6Al-4V和IMI834的相当。复合材料内含有较细小的薄片状组织，这种组织为α β相互相交错构成，这种细小的α β相间的层状组织对于阻止疲劳裂纹的扩展和提高疲劳裂纹的扩展寿命有重要作用。退火后的复合材料疲劳裂纹扩展区规则且较宽广，从而也使复合材料具有较高的疲劳强度，疲劳裂纹扩展寿命延长。     

Neutronic characterization of the MEGAPIE target

The MEGAPIE project aimed to design, build and operate a liquid metal spallation neutron target of about 1 MW beam power in the SINQ facility at the Paul Scherrer Institut (Villigen, Switzerland). This project is an important step in the roadmap towards the demonstration of the accelerator driven system (ADS) concept and high power liquid metal targets in general. Following the design phase, an experimental program was defined to provide a complete characterization of the facility by performing a “mapping” of the neutron flux at different points, from the center of the target to the beam lines. The neutronic performance of the target was studied using different experimental techniques with the goals of validating the Monte Carlo codes used in the design of the target; additionally, the performance was compared with the solid lead targets used before and after the MEGAPIE experiment.     

Identification of microstructural mechanisms during densification of a TiAl alloy by spark plasma sintering

This work aims at identifying, by coupled scanning and transmission electron microscopy (SEM and TEM) observations, the densification mechanisms occurring when an atomized Ti-47Al-1W-1Re-0.2Si powder is densified by spark plasma sintering (SPS). For this purpose, interruptions of the SPS cycle have been performed to follow the evolution of the microstructure step by step. The powder particles exhibit a classical dendritic microstructure containing a large amount of out-of-equilibrium α phase. During heating-up, the microstructure undergoes successive transformations. At T = 525-875 °C the α phase transforms into γ. The γ phase formed is supersaturated in W and Re. It de-saturates for T above 875 °C by discontinuous precipitation of W and Re-rich B2 phase. Densification takes place for T between 900 °C and 1150 °C by plastic deformation of the powder particles. TEM observations show that the repartition of the plastic deformation is correlated to the dendritic microstructure, and that dynamic recrystallization mechanisms occur. Microstructural phenomena directly resulting from the high currents involved in the SPS process have not been observed.     

Portfolio Risk Measures: The Time’s Arrow Matters

The traditional ex post risk measure associated to a portfolio, a fund or a market performance, is the standard deviation of a series of past returns, called volatility. We propose an alternative risk measure, that turns out to better quantify the risk actually supported by an investor or asset manager with respect to a portfolio or a fund. This alternative measure is computed from the actual dispersion of successive cumulated returns relative to the corresponding successive cumulated returns produced by an accrued performance of null volatility, which better reflects the dynamics of the risk-return relationship over time. Hence, the proposed name of “accrued returns variability”, for such a risk measure that incorporates the passage of time. Applications are presented, to enlighten the advantage of this risk measure.