Neutronic characterization of the MEGAPIE target

The MEGAPIE project aimed to design, build and operate a liquid metal spallation neutron target of about 1 MW beam power in the SINQ facility at the Paul Scherrer Institut (Villigen, Switzerland). This project is an important step in the roadmap towards the demonstration of the accelerator driven system (ADS) concept and high power liquid metal targets in general. Following the design phase, an experimental program was defined to provide a complete characterization of the facility by performing a “mapping” of the neutron flux at different points, from the center of the target to the beam lines. The neutronic performance of the target was studied using different experimental techniques with the goals of validating the Monte Carlo codes used in the design of the target; additionally, the performance was compared with the solid lead targets used before and after the MEGAPIE experiment.     

The catalysis of the Ruff oxidative degradation of aldonic acids by titanium‐containing zeolites

Ti‐BEA and Ti‐FAU, obtained by post‐synthesis treatment, and TS‐1, obtained by direct hydrothermal synthesis, have been tested as catalysts for the Ruff oxidative degradation of calcium d‐gluconate to d‐arabinose using diluted hydrogen peroxide as oxidant. Only large‐pore zeolites Ti‐BEA and Ti‐FAU were found to be active. It was shown, in particular, that a very rapid leaching of titanium occurred and that the titanium species present in the solution were responsible for the catalytic activity observed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Prolonged display or rapid internalization of the IgG-binding protein ZZ anchored to the surface of cells using the diphtheria toxin T domain

We have shown previously that the diphtheria toxin transmembranedomain (T) may function as a membrane anchor for soluble proteinsfused at its C-terminus. Binding to membranes is triggered byacidic pH. Here, we further characterized this anchoring device.Soluble proteins may be fused at the N-terminus of the T domainor at both extremities, without modifying its membrane bindingproperties. This allows one to choose the orientation of theprotein to be attached to the membrane. Maximum binding to thecell surface is reached within 1 h. Anchoring occurs on cellspreviously treated with proteinase K, suggesting that T interactswith the lipid phase of the membrane without the help of cellsurface proteins. Binding does not permeabilize cells or affectcell viability, despite the fact that it permeabilizes liposomesand alters their structure. When attached to L929 fibroblasts,the proteins are not internalized and remain displayed at theirsurface for more than 24 h. When bound to K562 myeloid cells,the molecules are internalized and degraded. Thus, dependingon the cell type, soluble proteins may be anchored to the surfaceof cells by the T domain for an extended time or directed towardsan internalization pathway.     

Seeing is believing? When scanning electron microscopy (SEM) meets clinical dentistry: The replica technique.

In restorative dentistry, the in situ replication of intra‐oral situations, is based on a non‐invasive and non‐destructive scanning electron microscopy (SEM) evaluation method. The technique is suitable for investigation restorative materials and dental hard‐ and soft‐tissues, and its interfaces. Surface characteristics, integrity of interfaces (margins), or fracture analysis (chipping, cracks, etc.) with reliable resolution and under high magnification (from ×50 to ×5,000). Overall the current study aims to share detailed and reproducible information about the replica technique. Specific goals are: (a) to describe detailed each step involved in producing a replica of an intra‐oral situation, (b) to validate an integrated workflow based on a rational sequence from visual examination, to macrophotography and SEM analysis using the replica technique; (c) to present three clinical cases documented using the technique. A compilation of three clinical situations/cases were analyzed here by means the replica technique showing a wide range of possibilities that can be reached and explored with the described technique. This guidance document will contribute to a more accurate use of the replica technique and help researchers and clinicians to understand and identify issues related to restorative procedures under high magnification.     

High Efficiency and Wideband 300 GHz Frequency Doubler Based on Six Schottky Diodes

A high efficiency and wideband 300 GHz frequency doubler based on six Schottky diodes is presented in this paper. This balanced doubler features a compact and robust circuit on a 5-μm-thick, 0.36-mm-wide, and 1-mm-long GaAs membrane, fabricated by LERMA-C2N Schottky process. The conversion efficiency is mainly better than 16% across the wide bandwidth of 266–336 GHz (3 dB fractional bandwidth of 24%) when pumping with 20–60 mW input power (P _in) at the room temperature. A peak output power of 14.75 mW at 332 GHz with a 61.18 mW P _in, an excellent peak efficiency of 30.5% at 314 GHz with 43.86 mW P _in and several frequency points with outstanding efficiency of higher than 25% are delivered. This doubler served as the second stage of the 600 GHz frequency multiplier chain is designed, fabricated, and measured. The performance of this 300 GHz doubler is highlighted comparing to the state-of-art terahertz frequency doublers.     

Identification of microstructural mechanisms during densification of a TiAl alloy by spark plasma sintering

This work aims at identifying, by coupled scanning and transmission electron microscopy (SEM and TEM) observations, the densification mechanisms occurring when an atomized Ti-47Al-1W-1Re-0.2Si powder is densified by spark plasma sintering (SPS). For this purpose, interruptions of the SPS cycle have been performed to follow the evolution of the microstructure step by step. The powder particles exhibit a classical dendritic microstructure containing a large amount of out-of-equilibrium α phase. During heating-up, the microstructure undergoes successive transformations. At T = 525-875 °C the α phase transforms into γ. The γ phase formed is supersaturated in W and Re. It de-saturates for T above 875 °C by discontinuous precipitation of W and Re-rich B2 phase. Densification takes place for T between 900 °C and 1150 °C by plastic deformation of the powder particles. TEM observations show that the repartition of the plastic deformation is correlated to the dendritic microstructure, and that dynamic recrystallization mechanisms occur. Microstructural phenomena directly resulting from the high currents involved in the SPS process have not been observed.     

Portfolio Risk Measures: The Time’s Arrow Matters

The traditional ex post risk measure associated to a portfolio, a fund or a market performance, is the standard deviation of a series of past returns, called volatility. We propose an alternative risk measure, that turns out to better quantify the risk actually supported by an investor or asset manager with respect to a portfolio or a fund. This alternative measure is computed from the actual dispersion of successive cumulated returns relative to the corresponding successive cumulated returns produced by an accrued performance of null volatility, which better reflects the dynamics of the risk-return relationship over time. Hence, the proposed name of “accrued returns variability”, for such a risk measure that incorporates the passage of time. Applications are presented, to enlighten the advantage of this risk measure.     

PCA3 and PCA3-Based Nomograms Improve Diagnostic Accuracy in Patients Undergoing First Prostate Biopsy

While now recognized as an aid to predict repeat prostate biopsy outcome, the urinary PCA3 (prostate cancer gene 3) test has also been recently advocated to predict initial biopsy results. The objective is to evaluate the performance of the PCA3 test in predicting results of initial prostate biopsies and to determine whether its incorporation into specific nomograms reinforces its diagnostic value. A prospective study included 601 consecutive patients addressed for initial prostate biopsy. The PCA3 test was performed before ≥12-core initial prostate biopsy, along with standard risk factor assessment. Diagnostic performance of the PCA3 test was evaluated. The three available nomograms (Hansen’s and Chun’s nomograms, as well as the updated Prostate Cancer Prevention Trial risk calculator; PCPT) were applied to the cohort, and their predictive accuracies were assessed in terms of biopsy outcome: the presence of any prostate cancer (PCa) and high-grade prostate cancer (HGPCa). The PCA3 score provided significant predictive accuracy. While the PCPT risk calculator appeared less accurate; both Chun’s and Hansen’s nomograms provided good calibration and high net benefit on decision curve analyses. When applying nomogram-derived PCa probability thresholds ≤30%, ≤6% of HGPCa would have been missed, while avoiding up to 48% of unnecessary biopsies. The urinary PCA3 test and PCA3-incorporating nomograms can be considered as reliable tools to aid in the initial biopsy decision.