A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications

Metallurgical and Materials Transactions A - The use of secondary aluminum for structural components in the automotive industry is limited by the high Fe contents in recycled alloys which often...     

不同形貌Ga2O3纳米材料可控合成工艺研究

通过研究基片种类、加热温度、保温时间、冷却速度及是否加入催化剂等不同工艺参数对低维Ga2O3，纳米材料形貌的影响，确定出合成5种不同形貌β-Ga2O3纳米材料的工艺条件。场发射扫描电镜（FE-SEM）表明5种不同形貌α-Ga2O3纳米材料分别为纳米线、纳米棒、纳米带、纳米环及纳米片。X射线衍射（X-ray）分析结果表明不同形貌纳米材料均为晶格常数日=1．223nm，b=0．304nm，c=0．58nm，a=90°，β=103．7°，γ=90°的单斜晶系β-Ga2O3晶体。     

Some aspects of the role of coal thermoplasticity and coke structure in coal gasification. 2. The effects of pressure and heating rate on dilatometric parameters and optical anisotropy development

An examination of the influence of pressure and heating rate on the thermoplastic properties of a weakly coking coal and of coal with various pitch-like additives was carried out using a high pressure dilatometer. Pressure up to 4 MPa markedly increased the swelling properties and increased the plastic range by decreasing the softening temperature, but the effects of pressure were strongly influenced by rate of heating with high heating rates enhancing the effects. Additions of tar or pitch also enhanced swelling at low pressure. The solid carbonization residues from the dilatometer were examined by polarized light microscopy to determine the content and composition of optically anisotropic species. The anisotropic content was increased by increases in pressure and heating rate and pitch additives enhanced the anisotropic content, especially at low pressure, without affecting the composition of the anisotropy. No direct correlations exist between the dilatometric parameters and the optical anisotropy but their dependence on the conditions emphasizes that when considering high pressure gasification of coal, it is necessary to obtain data under appropriate conditions.     

On the mechanism of kerogen pyrolysis

Aromaticities determined by ¹³C n.m.r. are reported for five shale oil samples (Green River formation) prepared under widely different pyrolysis conditions. In the absence of high-pressure hydrogen, the total amount of aromatic carbon in the products is nearly twice that in the raw shale. This is true for a wide range of pyrolysis conditions, although the distribution of aromatic carbon between the oil and carbonaceous residue changes. High-pressure hydrogen appears to inhibit both the formation of additional aromatic carbon during pyrolysis and the coking of aromatic oil. An improved kerogen decomposition mechanism is reported that accounts for these effects and provides for changes in the aromaticity of the liquid product with pyrolysis conditions. Further work is necessary to make it quantitative and account for gas formation.     

DDT absorption and chylomicron transport in rat

Male rats were fed 100 nM dichlorodiphenyltrichloroethane-¹⁴C in oil by gastric tube. Recovery of dichlorodiphenyltrichloroethane-¹⁴C in thoracic duct lymph was 60% in 12 hr. Lymph dichlorodiphenyltrichloroethane-¹⁴C (97%) occurred in lipoproteins of d<1.006, designated chylomicrons. Mechanical separation of chylomicron triglyceride core (labeled with triglyceride-³H) from chylomicron membrane (labeled with phospholipid-³²P) showed that 97% dichlorodiphenyltrichloroethane-¹⁴C was present in triglyceride core. To investigate possible association of plasma clearance of the two core lipids, rats were pulse injected with chylomicrons, doubly labeled with triglyceride-³H and dichlorodiphenyltrichloroethane-¹⁴C. The decay of dichlorodiphenyltrichloroethane-¹⁴C in sequential serum samples was rapid (T^1/2=2 min) and was independent of triglyceride-³H decay. In tissues removed 14 min after injection of chylomicrons, 30% administered dichlorodiphenyltrichloroethane-¹⁴C was found in liver but only 1% in adipose tissue. In hepatectomized (eviscerated) rats, the decay of serum dichlorodiphenyltrichloroethane-¹⁴C (T^1/2=10 min) was also independent of and more rapid than triglyceride-³H decay. With sucrose density gradients, it was shown that chylomicron dichlorodiphenyltrichloroethane-¹⁴C transferred to higher density serum proteins in vitro and in vivo and to bovine albumin in vitro. Thus, dichlorodiphenyltrichloroethane was transported from intestine largely in the triglyderide phase of chylomicrons; disappearance of chylomicron-dichlorodiphenyltrichloroethane from the systemic circulation was rapid and partly independent of the presence of the liver and of triglyceride hydrolysis; some dichlorodiphenyltrichloroethane was transported from serum chylomicrons to albumin or other plasma proteins before tissue uptake.     

The non-Fickian diffusion of deterrents into a nitrocellulose-based propellant

The diffusion of solutions of ethyl centralite (EC), dibutylphthalate (DBP), and dinitrotoluene (DNT) into a nitrocellulose (NC) propellant is investigated. DBP and EC penetrate the propellant in a way consistent with Case II diffusion. The diffusion of DNT solutions is Fickian. The apparent activation energy for Case II diffusion is 62 kJ/mol for DBP and 66 kJ/mol for EC. Changes to coating solvent polarity have little effect on DNT and DBP penetration and merely alter the rate, not the mechanism, of EC diffusion into the propellant.     

Effect of catalyst on regioselectivity and vinyl/H exchange on silicon in the hydrosilylation of vinyl-siloxanes by T8 hydrogen silsesquioxane

We have recently reported the synthesis of octopus molecules of defined shape and size with molecular weights well into the thousands. These octopus molecules were made by placing eight pendant groups symmetrically about a central silsesquioxane core via the H₂PtCl₆ catalyzed hydrosilylation of 1-alkenes as well as vinyl- and allyl-siloxanes by T₈ hydrogen silsesquioxane, (HSiO₃₂)₈. The chemistry of addition was studied and it was found that while the addition of the 1-alkenes to T₈ was regioprecise with only -addition being observed, both - and -addition occurred with vinyl-siloxane. In addition, H-vinyl exchange on silicon was observed to occur with addition of vinyl-siloxane to T₈. In the current studies, the effect of the hydrosilylation catalyst. homogeneous and heterogeneous, on the regioselectivity of addition and on the extent of exchange on silicon was evaluated. It was found that the heterogeneous catalysts Pt–C, sulfided Pt–C, and Rh–C required higher temperature and longer times to get complete reaction than the homogeneous catalysts. H₂PtCl₆ and the tetramethyldivinyldisiloxane complex of Pt. Pd supported catalysts were not effective catalysts for this hydrosilylation. The extent of exchange on silicon and the degree of the second mode of addition occurring were higher with the heterogenous catalysts and may be a result of the higher reaction temperatures.     

Carbonization and liquid-crystal (mesophase) development. 12. Mechanisms of the co-carbonization of coals with organic additives

In industrial situations, coals interact with solvents or additives to produce liquid fuels, solvent-refined coal, coal extract and metallurgical coke. In these processes there occurs a wide variation in effects or modifications of the coal by these additives. This paper describes the modifications which can occur, using a wide range of rank of coal, when these coals interact and are co-carbonized with a wide range of additives of different chemical properties. The optical texture of the resultant cokes is given special attention. The objective of the paper is to summarize the current state of knowledge of the mechanisms of these interactions. Possible mechanisms of interactions are summarized, kinetic and chemical structural aspects of reactions are outlined, the importance is mentioned of the formation of liquid phases enabling anisotropic optical textures in modified cokes to be created, and the industrial relevance of its possible development is discussed.     

Analysis of Indentation Crack as a Wedge-Loaded Half-Penny Crack

Surface cracks produced by indentation with a Vickers indenter were modeled as half-penny cracks extended by symmetric disk-shaped wedges. The wedge diameter was assumed to be equal to the hemispherical plastic zone size, and the wedge thickness was calculated by equating the wedge volume to the hardness-impression volume. The resulting equilibrium relation between the indentation load and the radius of the half-penny crack is in good quantitative agreement with similar relations obtained from fracture toughness calibration.