Structural Studies of Anomalous Behavior in the Silica-Alumina Gel System

This paper compares the structure ofAl₂O₃-SiO₂ xerogels prepared with Al₂O₃ contents ranging from 21 to 75 wt% (13 to 64 mol%). The 47 wt% Al₂O₃ xerogel (Al/Si ≅ 1) exhibits anomalously low surface area (≅1 m²/g) and skeletal density compared with other Al₂O₃-Si₂ compositions. Based on the results of nitrogen adsorption/condensation, helium displacement, high-resolution transmission electron microscopy (HRTEM), small-angle X-ray scattering (SAXS), and small-angle neutron scattering (SANS), we attribute the low surface area and skeletal density (density of the solid phase which is inaccessable to helium) to the formation of closed micropores, whereas the higher surface area materials exhibit a slightly coarser texture comprising open pores with radii of ≅1 nm. X-ray diffraction (XRD) and ²⁹SI and ²⁷Al magic-angle spinning nuclear magnetic resonance (MASNMR) indicate no anomalous behavior in the 47% sample on molecular length scales. HRTEM indicates the presence of a small fraction of crystallites which is supported by the SAXS results, but it is unknown if this crystallinity is related to low surface area. Low-field ¹H NMR spin-lattice relaxation measurements show that the physical structure of all of the 'wet' gels is similar implying that pore closure occurs during drying. Consistent with this idea, gel surface area and density increased significantly when the pore fluid (water) was replaced with a lower surface tension fluid (formamide, dioxane, ethanol. water/surfactant).     

Thermal denaturation of soy proteins as related to their dye-binding characteristics and functionality

The binding of Cresol Red and of Acid Orange 10 (in the absence and presence of urea) to unheated and progressively heated, defatted soy meal was compared with their NSI values, urease activities,in vitro digestibilities, unreactive lysine contents, and foaming and emulsifying capacities. These results suggested that increased amounts of Cresol Red and of Acid Orange 10 (in the presence of urea) bound to the heated samples were due to the progressive exposure of hydrophobic residues caused thermal denaturation. High statistical correlations were obtained between dye-binding, the duration of heating, and functional properties. Our results indicate that dye-binding has potential for predicting certain functional properties as well as for monitoring thermal denaturation of soy proteins.     

2,2′-OXO-1, 1 ′-azobenzene A microbially transformed allelochemical from 2,3-Benzoxazolinone: I

2,2-Oxo-1,1 -azobenzene (AZOB), a compound with strong herbicidal activity, was isolated and characterized from a soil supplemented with 2,3-benzoxazolinone (BOA). A parallel experiment with 6-methoxy-2,3-benzoxazolinone (MBOA) yielded AZOB as well as its mono-(MAZOB) and dimethoxy-(DIMAZOB) derivatives. These compounds were produced only in the presence of soil microorganisms, via possible intermediates, I and II, which may dimerize or react with the parent molecule to form the final products. In the case of MBOA, it was shown that demethoxylation precedes the oxidation step. Although BOA and 2,4-dihydroxy-1,4(2H)-benzoxazin-3-one (DIBOA) were leached out of rye residues, there were no detectable amounts of the biotransformation products in the soil. When BOA was mixed with soil and rye residue, either under field conditions or in vitro, AZOB was detected. Levels of free BOA in the soil were greatly reduced by incubation with rye residue. AZOB was more toxic to curly cress (Lepidium sativum L.) and barnyardgrass (Echinochloa crusgatti L.) than either DIBOA or BOA.Journal Article No. 12943 of the Michigan Agricultural Experiment Station.     

Passivation of pyrite due to surface treatment

Two samples of naturally occurring pyrite were treated with acetyl acetone, silanes, humic acids, lignin-NaOH mixture, and oxalic acid. The corrosion rate of pyrite was observed to decrease significantly due to the surface treatment by the chemicals used in this study. Surface characterization methods indicate that phenyl triacetoxy silane forms a passive coating a few Angstroms thick on the pyrite, thus preventing its dissolution in 1M H₂SO₄.     

Effects of drought on yield and on grain and malt characters in spring barley

The effects on yield and on grain and malt characters, of drought stress applied at different stages of grain development and ripening were studied in three varieties of spring barley grown in a glasshouse. Differences between variety means were found for most of the characters studied, but only for wort filtration time was there a significant interaction between variety and irrigation treatment. Grain yield was reduced by all the treatments involving drought stress and the reduction was greatest when stress was applied at heading and maintained for at least 14 days. A similar response was found for the number of ears per plant. Number of grains per main-shoot ear was reduced by drought stress applied at heading but not when the stress was applied from 32 days after heading until harvest. Grain size was significantly reduced by all treatments. Raw-grain characters known to be correlated with malt extract were found to be affected by the treatments: grain nitrogen content, barley extract viscosity and the rate of sedimentation of barley flour in ethanol were all increased by drought stress, the degree of response varying with the length and timing of the period of drought. Malt extracts were reduced by drought stress whether this was applied early or late in grain development. Malting loss and germinative energy were reduced, and wort filtration time increased by late stress. α-Amylase activity in the germinating grain was unaffected by any of the treatments.     

A Test of the Equality of Survival Distributions Based on Paired Observations from Conditionally Independent Exponential Distributions

A model describes the joint distribution of paired survival times based on certain reasonable assumptions appropriate for biological data generated in a clinical trial setting or for certain failure data. An exact parametric test for equality of mean survival times for data following this distribution is developed. The power of the exact test is investigated by a computer simulation study for various sample sizes and values of the model parameters and compared to that of alternative tests. Heretofore, researchers desiring to analyze paired survival data have resorted to paired t tests or nonparametric procedures such as the sign test or signed ranks test. The t-test is invalid for non-normally distributed data although the robustness of the test might minimize the difficulty. The nonparametric tests, by their nature, fail to use the data completely. This paper presents an exact parametric test based on a distribution whose justification requires rather modest and reasonable assumptions. Critical values for the test can be obtained from a table of the chi-square distribution. This exact test appears to be a viable alternative to non-parametric approaches to the analysis of paired survival data. It is extremely easy to calculate on a hand calculator. In fact, since no data storage is required (unlike the signed ranks test), the calculations can be readily programmed on a programmable calculator. The modeling of bivariate and multivariate survival data we believe has not been adequately addressed in the statistical and engineering literature. We hope that this paper will spark additional work.     

将电磁感应加热应用的IGBT功率损耗降至最低

传统家用电器由于使用数量增多,其总能耗与相关成本也在不断增加。为了减少费用支出和控制碳排放,需要为室内环境开发出更高能效的电器。本文提出的电磁感应加热炉具,其使用电磁产生的热能来烹调,不仅能效比标准家用电热锅高得多,而且其安全性也被证实更高。     

On the Certification of Bonded Repairs to Primary Composite Aircraft Components

Airworthiness certification is required when bonded repairs are made to primary composite structure in situations where damage has reduced or has the potential to reduce residual strength to below the design ultimate strength. Generally, certification of bonded primary structure poses many difficulties. As most repairs are one-off events meeting these certification requirements is especially challenging since demonstration by testing will generally not be possible or cost-effective. This paper discusses options for addressing the two key issues relating to certification: (a) how to validate initial and enduring bond strength of adhesive bonds, mainly given the inability of conventional non-destructive inspection to provide this assurance and (b) how to develop acceptable generic design allowables for bonded repairs which represent actual failure modes – especially for cyclic loading, since validation by testing of simulated repairs will generally be infeasible. It is concluded that proof testing of bonded repair coupons is a promising approach for validating bond strength and fatigue testing of representative bond joint specimen can provide generic allowables for patch design. For hidden structure or very high value repairs structural health monitoring of repairs based on a strain-transfer approach offers considerable promise.     

Low‐level PGAS computing on many‐core processors with TSHMEM

Diminishing returns from increased clock frequencies and instruction‐level parallelism have forced computer architects to adopt architectures that exploit wider parallelism through multiple processor cores. While emerging many‐core architectures have progressed at a remarkable rate, concerns arise regarding the performance and productivity of numerous parallel‐programming tools for application development. Development of parallel applications on many‐core processors often requires developers to familiarize themselves with unique characteristics of a target platform while attempting to maximize performance and maintain correctness of their applications. The family of partitioned global address space (PGAS) programming models comprises the current state of the art in balancing performance and programmability. One such PGAS approach is SHMEM, a lightweight, shared‐memory programming library that has demonstrated high performance and productivity potential for parallel‐computing systems with distributed‐memory architectures. In the paper, we present research, design, and analysis of a new SHMEM infrastructure specifically crafted for low‐level PGAS on modern and emerging many‐core processors featuring dozens of cores and more. Our approach (with a new library known as TSHMEM) is investigated and evaluated atop two generations of Tilera architectures, which are among the most sophisticated and scalable many‐core processors to date, and is intended to enable similar libraries atop other architectures now emerging. In developing TSHMEM, we explore design decisions and their impact on parallel performance for the Tilera TILE‐Gx and TILEPro many‐core architectures, and then evaluate the designs and algorithms within TSHMEM through microbenchmarking and applications studies with other communication libraries. Our results with barrier primitives provided by the Tilera libraries show dissimilar performance between the TILE‐Gx and TILEPro; therefore, TSHMEM's barrier design takes an alternative approach and leverages the on‐chip mesh network to provide consistent low‐latency performance. In addition, our experiments with TSHMEM show that naive collective algorithms consistently outperformed linear distributed collective algorithms when executed in an SMP‐centric environment. In leveraging these insights for the design of TSHMEM, our approach outperforms the OpenSHMEM reference implementation, achieves similar to positive performance over OpenMP and OSHMPI atop MPICH, and supports similar libraries in delivering high‐performance parallel computing to emerging many‐core systems. Copyright © 2015 John Wiley & Sons, Ltd.