Design and realization of transparent solar modules based on luminescent solar concentrators integrating nanostructured photonic crystals

Herein, we present a prototype of a photovoltaic module that combines a luminescent solar concentrator integrating one‐dimensional photonic crystals and in‐plane CuInGaSe₂ (CIGS) solar cells. Highly uniform and wide‐area nanostructured multilayers with photonic crystal properties were deposited by a cost‐efficient and scalable liquid processing amenable to large‐scale fabrication. Their role is to both maximize light absorption in the targeted spectral range, determined by the fluorophore employed, and minimize losses caused by emission at angles within the escape cone of the planar concentrator. From a structural perspective, the porous nature of the layers facilitates the integration with the thermoplastic polymers typically used to encapsulate and seal these modules. Judicious design of the module geometry, as well as of the optical properties of the dielectric mirrors employed, allows optimizing light guiding and hence photovoltaic performance while preserving a great deal of transparency. Optimized in‐plane designs like the one herein proposed are of relevance for building integrated photovoltaics, as ease of fabrication, long‐term stability and improved performance are simultaneously achieved. © 2015 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.     

The chemical and structural origin of efficient p-type doping in P3HT

We investigate the chemical and structural properties of solution-processed thin films of P3HT blended with p-type dopant F4TCNQ. The maximum in-plane electrical conductivity of doped films is observed at a molar doping fraction of 0.17, in agreement with the binding mechanism of F4TCNQ:P3HT complexes. Through the use of X-ray diffraction, a previously unreported crystalline phase is observed for P3HT films doped above a critical threshold concentration. This crystalline phase involves the incorporation of F4TCNQ molecules into ordered polymer regions and ultimately improves charge dissociation, leading to higher carrier density in thin film. Finally, optical absorption and X-ray diffraction reveal that the chemical state of P3HT in solution has a dramatic impact on the electrical and structural properties of the blended films.     

Reputation based selfishness prevention techniques for mobile ad-hoc networks

Mobile ad-hoc networks require nodes to cooperate in the relaying of data from source to destination. However, due to their limited resources, selfish nodes may be unwilling to forward packets, which can deteriorate the multi-hop connectivity. Different reputation-based protocols have been proposed to cope with selfishness in mobile ad-hoc networks. These protocols utilize the watchdog detection mechanism to observe the correct relaying of packets, and to compile information about potential selfish nodes. This information is used to prevent the participation of selfish nodes in the establishment of multi-hop routes. Despite its wide use, watchdog tends to overestimate the selfish behavior of nodes due to the effects of radio transmission errors or packet collisions that can be mistaken for intentional packet drops. As a result, the availability of valid multi-hop routes is reduced, and the overall performance deteriorates. This paper proposes and evaluates three detection techniques that improve the ability of selfishness prevention protocols to detect selfish nodes and to increase the number of valid routes.     

MnO2-Based Electrochemical Supercapacitors on Flexible Carbon Substrates

Manganese dioxide films were grown on large area flexible carbon aerogel substrates. Characterization by x-ray diffraction confirmed α-MnO₂ growth. Three types of films were compared as a function of hexamethylenetetramine (HMTA) concentration during growth. The highest concentration of HM TA produced MnO₂ flower-like films, as observed by scanning electron microscopy, whose thickness and surface coverage lead to both a higher specific capacitance and higher series resistance. Specific capacitance was measured to be 64 F/g using a galvanostatic setup, compared to the 47 F/g-specific capacitance of the carbon aerogel substrate. Such supercapacitor devices can be fabricated on large area sheets of carbon aerogel to achieve high total capacitance.     

Analysis of delay mean and variance of collision-free WDM rings with segment recirculation of blocked traffic

In Tunable-Transmitter Fixed-Receiver (TT-FR)-based Wavelength Division Multiplexed (WDM) ring topologies, each node is provided with a dedicated wavelength (home channel) for reception, which must be shared by the upstream nodes willing to communicate with it. Thus, to avoid channel collisions, it is necessary to define a Medium Access Control (MAC) mechanism that arbitrates access to a given destination wavelength. This work proposes and analyses a simple MAC mechanism that avoids channel collisions by recirculating traffic on the upstream ring segment where congestion was detected. Essentially, whenever a given node has got any traffic to transmit, it must first block access to in-transit traffic, which is reflected back to the upstream node over a second optical fibre. Such blocked traffic is given a second chance to pass through the congested node after a round segment delay, thus making use of the ring topology as buffering units. This work analyses the performance operation of such a MAC protocol under two policies applied to recirculated traffic: (1) recirculation bypass and (2) recirculation store-and-forward.     

Three-dimensional optical data storage through multi-photon confocal microscopy and imaging

Three dimensional optical data storage is one of the most promising tools to respond to the always growing demand for high data storage capacity. Here, we focused a femtosecond laser source by means of a confocal microscope onto different transparent recording media. The purpose of the study is to probe the capability of the system to independently address different data layers within the storage medium achieving thus three dimensional data storage. We demonstrated the possibility to write superposed independent layers of data due to either multiphoton excitation or to local optical breakdown and the performances observed in the different types of media used are compared.     

Role of the Anion on the Transport and Structure of Organic Mixed Conductors

Organic mixed conductors are increasingly employed in electrochemical devices operating in aqueous solutions that leverage simultaneous transport of ions and electrons. Indeed, their mode of operation relies on changing their doping (oxidation) state by the migration of ions to compensate for electronic charges. Nevertheless, the structural and morphological changes that organic mixed conductors experience when ions and water penetrate the material are not fully understood. Through a combination of electrochemical, gravimetric, and structural characterization, the effects of water and anions with a hydrophilic conjugated polymer are elucidated. Using a series of sodium‐ion aqueous salts of varying anion size, hydration shells, and acidity, the links between the nature of the anion and the transport and structural properties of the polymer are systematically studied. Upon doping, ions intercalate in the crystallites, permanently modifying the lattice spacings, and residual water swells the film. The polymer, however, maintains electrochemical reversibility. The performance of electrochemical transistors reveals that doping with larger, less hydrated, anions increases their transconductance but decreases switching speed. This study highlights the complexity of electrolyte‐mixed conductor interactions and advances materials design, emphasizing the coupled role of polymer and electrolyte (solvent and ion) in device performance.     

Mechanism of Crystallization and Implications for Charge Transport in Poly(3‐ethylhexylthiophene) Thin Films

In this work, crystallization kinetics and aggregate growth of poly(3‐ethylhexylthiophene) (P3EHT) thin films are studied as a function of film thickness. X‐ray diffraction and optical absorption show that individual aggregates and crystallites grow anisotropically and mostly along only two packing directions: the alkyl stacking and the polymer chain backbone direction. Further, it is also determined that crystallization kinetics is limited by the reorganization of polymer chains and depends strongly on the film thickness and average molecular weight. Time‐dependent, field‐effect hole mobilities in thin films reveal a percolation threshold for both low and high molecular weight P3EHT. Structural analysis reveals that charge percolation requires bridged aggregates separated by a distance of ≈2–3 nm, which is on the order of the polymer persistence length. These results thus highlight the importance of tie molecules and inter‐aggregate distance in supporting charge percolation in semiconducting polymer thin films. The study as a whole also demonstrates that P3EHT is an ideal model system for polythiophenes and should prove to be useful for future investigations into crystallization kinetics.     

License Plate Recognition for Parking Control System by Mathematical Morphology

Nowadays, license plate recognition for parking systems is a critical task to provide automatic control of customers and payment. This paper introduces a new method for automatic recognition of license plates of vehicles by mathematical morphology. The proposed method can provide the license plate number of the plates in different light conditions, colors, sizes, and inclination (angles). The algorithm can recognize the license plates of European Union vehicles quickly and correctly. The pattern learning of mathematical skeletons has high efficiency in the process. The performance of the algorithm is demonstrated well by being tested on a parking control system.     

Test and Reliability in Approximate Computing

This paper presents an overview of test and reliability approaches for approximate computing architectures. We focus on how specific methods for test and reliability can be used to improve the characteristics of approximate computing in terms of power consumption, area, life expectancy and precision. This paper does not address specification and design of approximate hardware/software/algorithms, but provides an in-depth knowledge on how the reliability and test related techniques can be efficiently used to maximize the benefits of approximate computing.