Functional Patterning of Biopolymer Thin Films Using Enzymes and Lithographic Methods

Two different lithographic techniques for the patterning of thin biopolymer films are developed. The first method is based on using a microstructured elastomeric mold for the structuring of thin films of regenerated cellulose. The thin films are manufactured by spin‐coating of trimethylsilyl cellulose (TMSC) and subsequent regeneration. The microchannels formed by the mold and the cellulose film are filled with a cellulase solution by capillary action. In the areas exposed to the enzyme solution, the cellulose film is digested, whereas the area in contact with the mold is protected from the enzymatic activity. Optical thickness measurements, atomic force microscopy and fluorescent staining confirm a successful patterning of cellulose on several substrates by this method. The second method is based on the structured regeneration of thin TMSC films. TMSC surfaces are protected with metal masks and exposed to vapors of hydrochloric acid. These treatments result in hydrophilic cellulose structures surrounded by hydrophobic TMSC with differing physicochemical properties. Treatments of the obtained structures with cellulases allow the selective removal of pure cellulose, whereas a TMSC pattern remains on the surface. These TMSC can be regenerated back to pure cellulose by treatments with vapors of hydrochloric acid. The developed methods allow the effective fabrication of micropatterned biopolymer thin films suitable for further functionalization and application in, e.g., bioanalytical devices. This is shown by the immobilization and detection of single‐stranded DNA on structured cellulose surfaces. Owing to the versatility of both patterning approaches the methods can be further extended to other combinations of substrates and enzymes.     

Comparison of two micromechanical models for predicting elasto-plastic response of wood–plastic composites

The mechanical response of wood- and cellulose-filled polymers and its comparison to analytical models is studied in this article. To model the elasto-plastic response of the wood–plastic composite (WPC), two explicit semi-analytical micromechanical methods were used: Mori–Tanaka Method (MTM) and Generalised Method of Cells (GMC). For experimental purpose, several test specimens composed of matrix polypropylene (PP) or polystyrene (PS) and filled with wood or cellulose short fibres of different length to width aspect ratio and various volume fractions were injection moulded. Tensile testing was then used to gain experimental data, which were then compared to the calculated prediction of proposed micromechanical models to test their applicability. The comparison of results show that both methods can accurately predict the response of the composite in the elastic area; however Mori–Tanaka Method can achieve better results when forecasting plastic deformations of wood–plastic composites.     

The wettability and bonding performance of densified VTC beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) Karst.) bonded with phenol–formaldehyde adhesive and liquefied wood

The influence of viscoelastic thermal compression (VTC) on surface wettability and bonding performance of wood was evaluated. Low quality beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) Karst.) were densified with the VTC process to different degrees of densification. Control and densified strips were bonded with phenol–formaldehyde (PF) adhesive and liquefied wood (LW). Shear strength of bonded assemblies was determined after 1 week of conditioning at 20 °C and relative humidity of 65 %. Wettability was determined on the basis of the contact angle of water, PF adhesive, and LW using the Wilhelmy method. Results showed that densification of beech and spruce wood did not significantly affect the shear strength of specimens bonded with PF adhesive. In beech assemblies bonded with LW shear strength decreased significantly with increased density, whereas in bonded spruce specimens decrease of shear strength was not significant. It was found that degree of densification and bonding process used in the study were not appropriately chosen for spruce wood specimens, since major deformations after the bonding process occurred. Wettability changed significantly after densification. Contact angle of water and LW increased after densification, whereas contact angle of PF showed inverse trend and decreased after VTC process. Furthermore, the degree of densification had a minor effect on the wettability.     

Geometry of plain weave fabric under shear deformation. Part I: measurement of exterior positions of yarns

Behaviour of woven fabrics in all directions is important in some fabric applications. Dealing with geometrical deformation of fabric under shear stress is the main attempt of this paper. A method for detecting exterior positions of yarns in fabric, namely variation in warp-weft yarns angle and sett of yarns is developed in the present part. For this purpose, the fast Fourier transform (FFT) method is modified for detecting exterior position of yarns in sheared fabric. In an empirical work, two kinds of plain weave fabrics, cotton and polypropylene, are considered and specimens are prepared in different dimensions with identical aspect ration. Exterior positions of yarns in certain elongations are computed by proposed method for each specimen. It was found that the modified FFT technique is valid for evaluating exterior positions of yarns in sheared fabric. Moreover, it is observed that there is a critical state in behaviour of woven fabric under shear deformation. In subsequent parts, the treatment of fabric under shear deformation will be simulated and compared with results of present part.     

Identifying the unknowns by aligning fragmentation trees

Mass spectrometry allows sensitive, automated, and high-throughput analysis of small molecules. In principle, tandem mass spectrometry allows us to identify "unknown" small molecules not in any database, but the automated interpretation of such data is in its infancy. Fragmentation trees have recently been introduced for the automated analysis of the fragmentation patterns of small molecules. We present a method for the automated comparison of such fragmentation patterns, based on aligning the compounds' fragmentation trees. We cluster compounds based solely on their fragmentation patterns and show a good agreement with known compound classes. Fragmentation pattern similarities are strongly correlated with the chemical similarity of molecules. We present a tool for searching a database for compounds with fragmentation pattern similar to an unknown sample compound. We apply this tool to metabolites from Icelandic poppy. Our method allows fully automated computational identification of small molecules that cannot be found in any database.     

The best screw shape for fine zinc oxide particles feeding

One of the most important requirements of particles feeding is a very homogeneous mass flow of fine particles. Screw feeders are among equipment used to feed particles in many industries. In this study, the performance of four single screw feeders with different pitch and blade shape screws has been studied experimentally for steady and stable feeding of fine zinc oxide particles at flow rates corresponding to laboratory scale range (under 10 g/min). The following results were obtained from this investigation: (I) the sticking problem of fine particles in angular pitch screw was solved by changing the pitch shape to circular; (II) the distribution of the fluctuations and their intensity in mass flow rates also lessen by using the circular pitch and a thin blade screw in place of the circular pitch and a thick blade screw. Also for both feeders, the feeding was often interrupted in low flow rates, but it will be disappeared by increasing the flow rate. Furthermore, the results of experiments show that the performance of the circular pitch and a thin blade screw feeder was better than other screw feeders and able to both swirl and mix the particles with different characteristics and reduce the mean aggregate size of the particle size distribution (PSD) when transmitting the zinc oxide particles.     

Project Tocoen. The Fate of Selected Organic Compounds in the Environment. Part XXVIII. Levels of PAHs and Some Halogenated POPs in Ambient Air in Czech Republic

Abstract

Concentrations of polyaromatic hydrocarbons (PAHs), chlorinated pesticides, polychlorinated biphenyls, dibenzo-p-dioxins and dibenzo-p-furans (PCDDs/Fs) in ambient air in Ko?etice, a background locality in the South Bohemia, have been estimated in the period from July to December 1994. The 24-hours samples have been taken by the means of a high-volume sampler. Sample analysis involved Soxhlet extraction of polyurethane foam, extract preconcentration and chromatographic clean-up procedure followed by HPLC determination of PAHs with fluorescence detection, GC/ECD determination of chlorinated pollutants, and GC/MS determination of PCDDs/Fs. The results of this first detailed study undertaken in Czech Republic are compared with the data obtained by similar projects in industrial and/or urban areas in the Czech Republic and in rural or urban areas in other European countries.