Signal-to-noise ratio study of full-field fourier-domain optical coherence tomography

We report a new approach in optical coherence tomography (OCT) called full-field Fourier-domain OCT (3F-OCT). A three-dimensional image of a sample is obtained by digital reconstruction of a three-dimensional data cube, acquired with a Fourier holography recording system, illuminated with a swept source. We present a theoretical and experimental study of the signal-to-noise ratio of the 3F-OCT approach versus serial image acquisition (flying-spot OCT) approach.     

Analyzing XACML policies using answer set programming

International Journal of Information Security - With the tremendous growth of Web applications and services, eXtensible Access Control Markup Language (XACML) has been broadly adopted to specify...     

Forward Adaptive Logarithmic Quantizer with New Lossless Coding Method for Laplacian Source

The aim of this paper is to improve the G.711 standard, which is widely used, especially in the public switched telephone network (PSTN). Two solutions are proposed. The first solution uses only lossless coder, achieving a bit-rate decrease of 0.82 bits/sample, compared to the G.711 codec. The second solution uses forward adaptation and a lossless coder, further decreasing the bit-rate (by 1.25 bits/sample) and achieving higher average signal-to-quantization noise ratio (SQNR) in comparison with the G.711 codec. Also, the second solution is more robust than the G.711 codec, which means that it has near constant SQNR for a wide range of input signal power. That is very important for signals whose input power varies with time, such as speech and video signals. Our solutions are compatible with the G.711 codec, they have little additional complexity and delay and therefore can be applied in real-time systems, such as PSTN or VoIP. They can also be used in many other systems, such as WiMax and OFDM, as a replacement or improvement of the G.711 codec. Standardization process of the G.711.1 standard (which is a wide-band extension of the G.711 standard) is largely present. Our solutions fulfill all the requirements for that new standard; therefore they can be implemented in its low-frequency part.     

An adaptive partitioning approach for mining discriminant regions in 3D image data

Mining discriminative spatial patterns in image data is an emerging subject of interest in medical imaging, meteorology, engineering, biology, and other fields. In this paper, we propose a novel approach for detecting spatial regions that are highly discriminative among different classes of three dimensional (3D) image data. The main idea of our approach is to treat the initial 3D image as a hyper-rectangle and search for discriminative regions by adaptively partitioning the space into progressively smaller hyper-rectangles (sub-regions). We use statistical information about each hyper-rectangle to guide the selectivity of the partitioning. A hyper-rectangle is partitioned only if its attribute cannot adequately discriminate among the distinct labeled classes, and it is sufficiently large for further splitting. To evaluate the discriminative power of the attributes corresponding to the detected regions, we performed classification experiments on artificial and real datasets. Our results show that the proposed method outperforms major competitors, achieving 30% and 15% better classification accuracy on synthetic and real data respectively while reducing by two orders of magnitude the number of statistical tests required by voxel-based approaches.     

A CALCULATION METHOD OF OBTAINING DESORPTION ISOTHERMS OF BEECH (FAGUSMOESL4CA) WOOD

This paper presents the specific methods to obtain sorption isotherms. Sorption isotherms were first obtained experimentally for 20°C and 100°C and then, by using the presented method, isotherms were also obtained for 50°C and 80°C. The same treatment can be applied in finding any isotherm sorption in the temperature range between 20°Cand 100°C.

The experiments were carried out on beech (Fagus moesiaca) and sample dimensions were 3×3×3cm. Based on the results of the experiment, by regression analysis, the most suitable analytic formula was proposed. It relsites temperature and air humidity with the equilibrium moisture content in wood. Experimental results were compared with psychrometric tables and Bramhall's formula for desorption curves with good agreement. This proves that the method presented in this paper is precise and efficient to decrease the lime needed to obtain sorption isotherms experimentally.     

Novel power-based routing metrics for multi-channel multi-interface wireless mesh networks

In this paper the problem of selecting optimal paths in a MCMI (Multi-Channel Multi-Interface) WMN (Wireless Mesh Network) is considered. The WMNs are characterized by high dynamic range of the received signal level, especially in the indoor environment. To improve the existing routing metrics and track fast changes that occur in the link state, a corresponding parameter based on the received signal level was assigned to each link. By combining this parameter and known metrics, ETX (Expected Transmission Count), WCETT (Weighted Cumulative ETT) and MIC (Metric of Interference and Channel-switching), three new metrics were formed. All metrics were incorporated in MCR (Multi Channel Routing) protocol and an appropriate propagation model was used for simulations in a real, indoor environment. Proposed metrics, original metrics, MCR protocol, and indoor propagation model were implemented in Glomosim simulator. New metrics were compared against known metrics and also among each other in terms of throughput of user data and average end-to-end delay of the network. The results have shown that proposed metrics significantly outperform original metrics. With this approach, better network performance can be achieved without any additional hardware and with minimal software changes.     

Design and characterization of a current sensing platform for silicon-based nanopores with integrated tunneling nanoelectrodes

Solid-state nanopores have been gaining popularity in nano-biotechnology for single molecule detection, in particular for label-free high-throughput DNA sequencing. In order to address the improvement of the resolution/speed trade-off critical in this application, here we present a new two-channel current amplifier tailored for solid-state nanopore devices with integrated tunneling electrodes. The simultaneous detection of ion and tunneling currents provides enhanced molecule tracking capability. We describe the system design starting from a detailed noise analysis and device modeling, highlighting the detrimental role of the conductive silicon substrate and of all the stray capacitive couplings between the electrodes. Given the high input capacitance (0.1–1 nF), the input voltage noise has been carefully minimized choosing a discrete couple of matched low-noise JFETs as input stage, thus achieving an equivalent input noise of 1.5 nV/√Hz (corresponding to a current noise floor of 15 fA/√Hz at 10 kHz). Low-noise performance (11 pA rms noise integrated over a 75 kHz bandwidth) is preserved at a wide bandwidth (300 kHz) and high gain (100 MΩ) thanks to the adoption of an improved integrator/differentiator cascade topology. Furthermore, along with biasing networks and selectable low-pass filters, an AC-coupled channel providing additional gain has been introduced in order to “zoom” in the current signature during pore blockade events. Together with an experimental characterization of the system (and comparison with the noise performance of other instruments), the platform is validated by demonstrating the detection of λ-DNA with 20 nm pores.     

Some engineering properties of limestone: Tunnel Stra?ina case study (Croatia)

The paper presents geological and engineering geological characteristics of the Stra?ina Tunnel along the Bisko-Šestanovac section of the Zagreb-Split-Dubrovnik highway in Croatia. This paper compares the actual conditions of the rock mass during the excavation with a prediction model that preceded the excavation. From the engineering-geological viewpoint the rock mass in the tunnel was of a significantly higher quality than the prediction model. The specific geological feature of the Stra?ina Tunnel, with its right and left tunnel tube, is the passage of the right tunnel tube through a transgressive contact between Upper Cretaceous rudist limestones and Eocene foraminiferal limestones. Since this is the only tunnel in Croatia excavated through this particular transgressive contact, the geological and engineering properties of the transgression zone were up to now only assumed. Therefore, additional mineralogical, petrographical and engineering geological observations were carried out in order to determine and describe the transgression zone. The results are presented in this paper. In the left tunnel tube the contact between the mentioned litostratigraphical Units is of the fault type. This paper also briefly deals with the significance and cause of the overprofile excavation during tunneling through strongly karstified carbonate rocks. Consequently, special attention was paid to the overprofile during excavation since it can significantly affect tunneling costs.     

Generalized charge simulation method for the calculation of the electric field in high voltage substations

This paper deals with the calculation of the electric field strength in high voltage (HV) substations comprising complex geometrical structures. Generalized charge simulation method is proposed for improving the precision of the calculation of the electric field strength. The objective of this analysis is to examine the influence of towers, HV apparatus and fences on the spatial electric field distribution. For this purpose, a three-dimensional generalized model of HV substation has been developed, including phase conductors, bypass busbars, HV apparatus, fences and towers (denoted as Full model). The obtained results of the calculation of the electric field strength are compared with the Simplified model, which only includes phase conductors connected to HV network. Verification of the proposed Full model performed by comparing the calculated and in-field measured values of the electric field strength within HV substations and in their vicinity gives very promising results.