Evaluation of the salt leaching method for the production of ethylene propylene diene monomer rubber foams

The thermomechanical behavior of ethylene propylene diene monomer (EPDM) foams produced with the salt leaching method has been investigated and compared with the behavior of EPDM foams obtained from conventional blowing agents. Moreover, the salt-leaching process has been optimized to minimize salt residues and the influence of different parameters (such as average particle size and particle size distribution) has been investigated. Scanning electron microscopy and density measurements highlighted that salt-leaching leads to the formation of open-cell porosity with cell dimensions of around 60 to 80 μm, while foams obtained with the two traditional foaming agents lead to closed-cell porosity. Compression set values indicate that the behavior of the foams produced with salt leaching are more similar to the unfoamed rubber, characterized by higher elasticity and low residual deformation. Two theoretical models were successfully applied to the compression curves (Mooney-Rivlin and Exponential-Logarithmic) and they highlighted the effect of foaming on the properties of EPDM rubber and in particular the higher chain extensibility obtained through the salt leaching foaming method.     

Output feedback of Markov jump linear systems with no mode observation: An automotive throttle application

The note presents an output feedback control strategy for Markov jump linear systems with no mode observation. Based on minimizing a finite‐time quadratic cost, we derive an algorithm that generates output feedback gains that satisfy a necessary optimality condition. These gains can be computed off‐line relying only on the initial condition of the system. This result expands a previous one from the literature that considered state‐feedback only. To illustrate the usefulness of the approach, real‐time laboratory experiments were performed to control an automotive electronic throttle valve subject to Markov‐driven voltage fluctuations. Copyright © 2015 John Wiley & Sons, Ltd.     

Some results on disturbance attenuation for Hamiltonian systems via direct discrete‐time design

The disturbance attenuation and robust disturbance attenuation problems for Hamiltonian systems in the discrete‐time setting are considered and some new results are presented. The new results are derived utilizing the recently presented dissipativity equality obtained by adding the dissipation rate function to the classical dissipativity inequality. A selection of the dissipation rate function yields new results. These results include a condition on the dissipation structure of the system to achieve the desired disturbance attenuation level and gives direct construction of optimal control laws for any desired disturbance attenuation level. The results remove the need to solve Hamilton–Jacobi–Isaacs inequalities. Copyright © 2014 John Wiley & Sons, Ltd.     

Workflows for Heliophysics

In this paper we describe how we have introduced workflows into the working practices of a community for whom the concept of workflows is very new, namely the heliophysics community. Heliophysics is a branch of astrophysics which studies the Sun and the interactions between the Sun and the planets, by tracking solar events as they travel throughout the Solar system. Heliophysics produces two major challenges for workflow technology. Firstly it is a systems science where research is currently developed by many different communities who need reliable data models and metadata to be able to work together. Thus it has major challenges in the semantics of workflows. Secondly, the problem of time is critical in heliophysics; the workflows must take account of the propagation of events outwards from the sun. They have to address the four dimensional nature of space and time in terms of the indexing of data. We discuss how we have built an environment for Heliophysics workflows building on and extending the Taverna workflow system and utilising the myExperiment site for sharing workflows. We also describe how we have integrated the workflows into the existing practices of the communities involved in Heliophysics by developing a web portal which can hide the technical details from the users, who can concentrate on the data from their scientific point of view rather than on the methods used to integrate and process the data. This work has been developed in the EU Framework 7 project HELIO, and is being disseminated to the worldwide Heliophysics community, since Heliophysics requires integration of effort on a global scale.     

oDect: an RFID‐based object detection API to support applications development on mobile devices

The RFID technology is becoming ever more popular in the development of ubiquitous computing applications. A full exploitation of the RFID potential requires the study and implementation of human–computer interaction (HCI) modalities to be able to support wide usability by the target audience. This implies the need for programming methodologies specifically dedicated to support the easy and efficient prototyping of applications to have feedback from early tests with users. On the basis of our field‐working experience, we have designed oDect, a high‐level language and platform‐independent application programming interface (API), ad hoc designed to meet the needs of typical applications for mobile devices (smart phones and PDAs). oDect aims at allowing application developers to create their prototypes focusing on the needs of the final users, without having to care about the low‐level software that interacts with the RFID hardware. Further, in an end‐user developing (EUD) approach, oDect provides specific support for the application end‐user herself to cope with typical problems of RFID applications in detecting objects. We describe in detail the features of the API and discuss the findings of a test with four programmers, where we analyse and evaluate the use of the API in four sample applications. We also present results of an end‐user test, which investigated strengths and weaknesses of the territorial agenda (TA) concept. The TA is an RFID‐based citizen guide that aids—through time‐ and location‐based reminders—users in their daily activities in a city. The TA directly exploits EUD features of oDect, in particular concerning the possibility of linking detected objects with custom actions. Copyright © 2008 John Wiley & Sons, Ltd.     

Real-time inverse dynamics control of parallel manipulators using general-purpose multibody software

This work deals with the problem of computing the inverse dynamics of complex constrained mechanical systems for real-time control applications. The main goal is the control of robotic systems using model-based schemes in which the inverse model itself is obtained using a general purpose multibody software, exploiting the redundant coordinate formalism. The resulting control scheme is essentially equivalent to a classical computed torque control, commonly used in robotics applications. This work proposes to use modern general-purpose multibody software to compute the inverse dynamics of complex rigid mechanisms in an efficient way, so that it suits the requirements of realistic real-time applications as well. This task can be very difficult, since it involves a higher number of equations than the relative coordinates approach. The latter is believed to be less general, and may suffer from topology limitations. The use of specialized linear algebra solvers makes this kind of control algorithms usable in real-time for mechanism models of realistic complexity. Numerical results from the simulation of practical applications are presented, consisting in a “delta” robot and a bio-mimetic 11 degrees of freedom manipulator controlled using the same software and the same algorithm.     

Global asymptotic stabilization of the attitude and the angular rates of an underactuated non-symmetric rigid body

The paper deals with the global stabilization of both the attitude and the angular velocities of an underactuated rigid body. First a stability theorem is proven for a class of systems; subsequently, the equations describing the physics of the rigid body are presented, showing that the rigid body belongs to the considered class of systems, and a sufficient condition for the application of the theorem to the stability of the rigid body equilibrium is pointed out. Finally, some simulation results are reported showing the effectiveness of the proposed methodology.     

Generation and interpretation of parsimonious predictive models for load forecasting in smart heating networks

Applied Intelligence - Forecasting future heat load in smart district heating networks is a key problem for utility companies that need such predictions for optimizing their operational activities....     

Velocity‐based formulations for standard and quasi‐incompressible hypoelastic‐plastic solids

We present three velocity‐based updated Lagrangian formulations for standard and quasi‐incompressible hypoelastic‐plastic solids. Three low‐order finite elements are derived and tested for non‐linear solid mechanics problems. The so‐called V‐element is based on a standard velocity approach, while a mixed velocity–pressure formulation is used for the VP and the VPS elements. The two‐field problem is solved via a two‐step Gauss–Seidel partitioned iterative scheme. First, the momentum equations are solved in terms of velocity increments, as for the V‐element. Then, the constitutive relation for the pressure is solved using the updated velocities obtained at the previous step. For the VPS‐element, the formulation is stabilized using the finite calculus method in order to solve problems involving quasi‐incompressible materials. All the solid elements are validated by solving two‐dimensional and three‐dimensional benchmark problems in statics as in dynamics. Copyright © 2016 John Wiley & Sons, Ltd.