Modeling and simulation of 2D lithium‐ion solid state battery

The goal of the work presented here was to develop a simulation approach for studying the effects of materials and geometry on the performance of Li‐ion Solid State Batteries (SSB). Simulation provides the opportunity to explore, with ease, different material properties and cell geometries to optimize a Li‐ion SSB's performance. Simulations shown in this paper are time‐dependent and consider electrochemical reaction, heat transfer, the diffusion of Li‐ions and electrons in the electrolyte, and solid Li diffusion in the positive electrode. A 2D model was simulated and the results shown. The simulations were able to show discharge curves, heat flux, the concentration of Li‐ions, electrons, and solid Li at any time in the discharge cycle. Copyright © 2015 John Wiley & Sons, Ltd.     

Einfluß der Einschnürung im Zugversuch auf die Formänderung bei Höchstlast und auf die Längsspannung

Grundgleichungen der Gleichmaßdehnung unter Berücksichtigung der Formänderungsgeschwindigkeit. Formänderung bei Höchstkraft unter Voraussetzung einer Gleichmaßverformung. Spannungszustand und Formänderungsgeschwindigkeit nach Beginn der Einschnürung. Mittlere Längsspannung unter Berücksichtigung des mehrachsigen Spannungszustandes und der Formänderungsgeschwindigkeit. Auswirkung der Einschnürung auf die Formänderung bei Höchstkraft.     

Flocculation,cell surface hydrophobicity and 3‐OH oxylipins in the SMA strain of Saccharomyces pastorianus

Three‐hydroxy‐oxylipins (3‐OH oxylipins) have been previously detected in brewing yeast production strains at flocculation onset. In this work, the SMA strain of Saccharomyces pastorianus was characterized during growth in a miniature fermentation assay by measuring flocculation and cell surface hydrophobicity (CSH). Proportions of 3‐OH oxylipin were also measured concurrently during growth in the miniature fermentation assay and a defined 3‐OH oxylipin extraction protocol using ethyl acetate is presented along with a novel derivatization and gas chromatography–mass spectrometry (GC‐MS) detection approach. When the SMA strain was grown in the assay, near maximal CSH and flocculation levels were achieved by a 36 h fermentation time. Under the same culture conditions, the oxylipin 3‐OH decanoic acid (3‐OH 10:0) was identified. This oxylipin could not be detected early in the fermentation, but elevated relative levels of 3‐OH 10:0 were reached by 36 h, coinciding with increased CSH levels. It was previously presumed that the formation of 3‐OH oxylipins at flocculation onset might increase the CSH. However, results from this study suggest that 3‐OH 10:0 may not contribute to cell wall hydrophobicity. The flocculation behaviour of the SMA strain was also monitored in the presence of 3‐OH 10:0, but exposure to this oxylipin did not impact the sedimentation of this yeast, suggesting that 3‐OH oxylipins may not act as mediators of quorum sensing in this strain. Copyright © 2015 The Institute of Brewing & Distilling     

Physical Stability of Octenyl Succinate–Modified Polysaccharides and Whey Proteins for Potential Use as Bioactive Carriers in Food Systems

The high cost and potential toxicity of biodegradable polymers like poly(lactic‐co‐glycolic)acid (PLGA) has increased the interest in natural and modified biopolymers as bioactive carriers. This study characterized the physical stability (water sorption and state transition behavior) of selected starch and proteins: octenyl succinate–modified depolymerized waxy corn starch (DWxCn), waxy rice starch (DWxRc), phytoglycogen, whey protein concentrate (80%, WPC), whey protein isolate (WPI), and α‐lactalbumin (α‐L) to determine their potential as carriers of bioactive compounds under different environmental conditions. After enzyme modification and particle size characterization, glass transition temperature and moisture isotherms were used to characterize the systems. DWxCn and DWxRc had increased water sorption compared to native starch. The level of octenyl succinate anhydrate (OSA) modification (3% and 7%) did not reduce the water sorption of the DWxCn and phytoglycogen samples. The Guggenheim–Andersen–de Boer model indicated that native waxy corn had significantly (P < 0.05) higher water monolayer capacity followed by 3%‐OSA‐modified DWxCn, WPI, 3%‐OSA‐modified DWxRc, α‐L, and native phytoglycogen. WPC had significantly lower water monolayer capacity. All Tg values matched with the solid‐like appearance of the biopolymers. Native polysaccharides and whey proteins had higher glass transition temperature (Tg) values. On the other hand, depolymerized waxy starches at 7%‐OSA modification had a “melted” appearance when exposed to environments with high relative humidity (above 70%) after 10 days at 23 °C. The use of depolymerized and OSA‐modified polysaccharides blended with proteins created more stable blends of biopolymers. Hence, this biopolymer would be suitable for materials exposed to high humidity environments in food applications.     

Comparative study of the physicochemical and palynological characteristics of honey from Melipona subnitida and Apis mellifera

Twenty‐four samples of Apis mellifera honey and twenty‐four samples of Melipona subnitida (Jandaira) honey were collected in the northeast of Brazil. Moisture, hydroxymethylfurfural, free acidity, insoluble solids in water, diastase activity, ashes, electrical conductivity, proteins, lipids, total carbohydrates, energy and sugars were the parameters analysed. The efficiency of the qualitative tests (Fiehe's test, Lugol's reaction, Lund's reaction) was tested. Pollen types and the corresponding plant species were identified in all samples (3 in Apis and 1 in Melipona). Apis mellifera honey samples demonstrated parameters in accordance with the Brazilian Legislation, while the Melipona subnitida honey samples displayed moisture (24.80%) and diastase activity (null) in discordance with the established by the regulation for Apis mellifera honeys. Apis honey samples presented higher values of electric conductivity (284.00 μS cm^?1) than the obtained from the Jandaira honey samples (102.77 μS cm^?1) as well as a darker colour (26.67 mmPfund) when compared with Jandaira honey (7.00 mmPfund). The concentration of the glucose, fructose and sucrose was higher in the Apis honeys than in the Jandaira honey. The characteristics of the two types of honey were very different, highlighting the need of developing specific legislation for stingless bees' honey.     

Shrimp processing residue as an alternative ingredient for new product development

Shrimp residues were dried (65 °C), grounded, and posteriorly used as an ingredient to the production of ‘spiced shrimp flour’ and ‘shrimp flavoured biscuits’. Both products were packed in modified atmosphere (100% N₂) and stored for 180 days (25 °C) for shelf life evaluation. The centesimal composition, physicochemical, microbiological and sensory analyses were carried out in triplicate. The microbiological analysis (residue and shrimp flour) was within the limits of the legislation, confirming the hygienic–sanitary care during processing. The protein content was the most outstanding (40.13% for the spiced shrimp flour and 20.52% for the shrimp flavoured biscuits). The microbiological evaluation for the ‘spiced shrimp flour’ and ‘shrimp flavoured biscuits’ was below the legal limit, and both products were accepted by sensory analysis. The shelf life evaluation demonstrated stability for 6 months. Thus, we concluded that the Litopenaeus vannamei shrimp residue is a promising ingredient in the food industry.     

Moisture sorption isotherms and isosteric heat of sorption of leaves and stems of lemon balm (Melissa officinalis L.) established by dynamic vapor sorption

The equilibrium moisture contents (MC) of leaves and stems of lemon balm (Melissa officinalis L.) were determined separately at temperatures of 25, 35 and 45 °C over a stepwise increase of relative humidity (RH) ranging from 3 to 90% by an automatic, gravimetric analyzer (DVS system). Equilibrium was achieved within 6 h for most of the target values of relative humidity. The equilibrium moisture content of leaves was significantly higher than that of stems (p < 0.05). Differences in moisture sorption capacity between the leaves and stems can be attributed to chemical composition and structure of the tissues. Five three-parameter moisture sorption models (modifications of Chung–Pfost, GAB, Halsey, Henderson and Oswin) were tested for their effectiveness to fit the experimental sorption data. The modified Oswin equation was found to be the best model to describe the adsorption isotherms of both leaves and stems of lemon balm. The recommended MC values of leaves and stems for microbial safe storage at 25 °C were 0.124 and 0.113 kg water per kg dry solids, respectively. The net isosteric heat of sorption was computed from the predicted sorption data by applying the integrated form of the Clausius–Clapeyron equation.     

Predictive Thermal Inactivation Model for Effects and Interactions of Temperature, NaCl, Sodium Pyrophosphate, and Sodium Lactate on Listeria monocytogenes in Ground Beef

The effects and interactions of heating temperature (60 °C to 73.9 °C), salt (0.0 % to 4.5 %?w/v), sodium pyrophosphate (0.0 % to 0.5 %?w/v), and sodium lactate (0.0 % to 4.5 %?w/v) on the heat resistance of a five-strain mixture of Listeria monocytogenes in 75 % lean ground beef were examined. Meat samples in sterile filtered stomacher bags were heated in a temperature controlled waterbath to determine thermal death times. The recovery medium was tryptic soy agar supplemented with 0.6 % yeast extract and 1 % sodium pyruvate. Weibull survival functions were employed to model the primary survival curves. Then, survival curve-specific estimated parameter values obtained from the Weibull model were used for determining a secondary model. The results indicate that temperature and salt have a large impact on the inactivation kinetics of L. monocytogenes, while sodium lactate (NaL) has an impact in the presence of salt. The model presented in this paper for predicting inactivation of L. monocytogenes can be used as an aid in designing lethality treatments meant to control the presence of this pathogen in ready-to-eat products.