Solubility of Si3N4 in Liquid SiO2

The nitrogen solubility in the SiO₂-rich liquid in the metastable binary SiO₂-Si₃N₄ system has been determined by analytical TEM to be 1%–4% of N/(O + N) at 1973–2223 K. Analysis of the near edge structure of the electron energy loss peak indicates that nitrogen is incorporated into the silicate network rather than being present as molecular N₂. A regular solution model with a positive enthalpy of mixing for the liquid was used to match the data for the metastable solubility of N in the presence of crystalline Si₃N₄ and to adjust the computed phase diagram. The solubility of Si₃N₄ in fused SiO₂ is far less than reported in liquid silicates also containing Al, Mg, and/or Y. Apparently, these cations act as modifiers that break anion bridges in the silicate network and, thereby, allow further incorporation of Si₃N₄ without prohibitive amounts of network cross-linking. Finally, indications emerged regarding the diffuse nature of the Si₃N₄-SiO₂ interface that leads to amorphous regions of higher N content.     

Geschäftsmodelle

The business model concept, although a relatively new topic for research, has garnered growing attention over the past decade. Whilst it has been robustly defined, the concept has so far attracted very little substantive research. In the context of the wide-spread digitization of businesses and society at large, the logic inherent in a business model has become critical for business success and, hence, a focus for academic inquiry. The business model concept is identified as the missing link between business strategy, processes, and Information Technology (IT). The authors argue that the BISE community offers distinct and unique competencies (e.g., translating business strategies into IT systems, managing business and IT processes, etc.) that can be harnessed for significant research contributions to this field. Within this research gap three distinct streams are delineated, namely, business models in IT industries, IT enabled or digital business models, and IT support for developing and managing business models. For these streams, the current state of the art, suggest critical research questions, and suitable research methodologies are outlined.     

Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

Hydrolytic degradation of ionically cross-linked polyphosphazene microspheres

The hydrolytic degradation of gel microspheres based on calcium cross-linked phosphazene polyelectrolytes, poly[di(carboxylatophenoxy)phosphazene] (PCPP) and poly[(carboxylatophenoxy) (glycinato)phosphazene] (PCGPP), was investigated. These microspheres are of importance as carriers in protein and cell encapsulation. Both PCPP and PCGPP ionotropic polyphosphazene hydrogels are degradable in an aqueous environment (pH 7.4, 37°C). The degradation rates can be increased by incorporation of hydrolysis sensitive glycinato groups as the pendant structures in the polymer (PCGPP). Hydrolysis of these polymer hydrogels led to low molecular weight (<1,000 Da) products. The erosion and molecular weight profiles varied also according to the molecular weight of the polyphosphazene constituting the gel beads. Another approach to affect the degradation rates consists of coating microspheres with poly-L -lysine. Ionotropic polyphosphazene hydrogels have potential as biodegradable devices for controlled drug delivery systems. © 1994 John Wiley & Sons, Inc.     

Buckling of jets in electrospinning

Various buckling instabilities of electrospinning jets were observed and compared with the buckling instabilities of uncharged fluid jets. Buckling instability arises due to jet compression at impingement on a collector surface and occurs independently of the electrical bending instability. The velocity, diameter, density and viscosity of the electrospinning jets are the key factors that determine the buckling frequency. The electrically charged jets impinging onto grounded, horizontal or inclined (wedge-like) electrodes moving laterally at a constant velocity are studied experimentally. Straight and bending (electrospinning) jets emerge at short and sufficiently long inter-electrode distances, respectively. The experiments show that both straight segment and bending jets, when impinging onto a counter-electrode, buckled and produced patterns of meandering deposits. In the case of bending electrospun jets these short-length buckling patterns were superimposed on the bending loops found in the deposits. Buckling-related and bending-related morphologies are easily distinguishable. The buckling patterns have frequencies of the order of 10⁵-10⁶ Hz, whereas the bending loops are formed at the frequencies of the order of 10³ Hz. The deposited buckling patterns include sinuous, zigzag-like, figures-of-eight, recurring curves, coiled and other structures that resembled many patterns created by uncharged jets of highly viscous fluids impinging a hard flat surface. In addition, several new morphologies which were not observed before with uncharged jets were found. The experimentally measured frequencies of the buckling patterns were compared to the theoretical predictions and a reasonable agreement was found.     

Practical Significance,Theory and Determination of Compatibility of Dyes on Synthetic-polymer Fibres

The compatibility of dyes is particularly important in regard to the time, reproducibility and levelness of dyeing. For basic dyes on acrylic fibres and anionic dyes on nylon, a characteristic of the dye—the compatibility value K— is valuable in determining whether it can be used in the same bath as others. Dyes having the same K-value are compatible under most dyeing conditions. For disperse dyes, K-values do not exist. In selecting such dyes for use together, other properties of the dyes and the concentrations to be used in the particular combination must be considered.     

Kinetic investigations in heterogeneous reaction systems by wavefront analysis

In this paper the previously introduced wavefront analysis is extended to heterogeneous reaction systems, which consist of several reaction steps. It is shown how three mainly informations obtained at the wavefront, namely the damping of the wavefront, the time-gradients at the wavefront and the propagation velocity of the wavefront, can be used for kinetic investigations of a reaction step under consideration.     

HDPE/LLDPE reactor blends with bimodal microstructures—part I: mechanical properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and, vice versa, HMW homopolymer to LMW copolymer. The physical properties of the blends were found to be consistent with the nature of the individual components. For the tensile properties, the stiffness decreases with increasing the fraction of the copolymer, regardless of the molecular weight of the homopolymer fraction. For these blends with bimodal microstructures, it was confirmed that the degree of crystallinity governs the stiffness of the polymer. However, the energy dampening properties of the polymers benefit from the presence of the copolymer. A balance of stiffness and toughness can be obtained by altering the composition of the blends. For some blends, the presence of HMW homopolymer can dominate the tensile properties, showing little variation in the stiffness with increased addition of copolymer. It was also demonstrated that the testing conditions and thermal treatment of the polymer greatly influence the resulting elastic and energy dampening properties. Depending on the desired application, annealing these polymers (especially very low density copolymers) not only increases the crystallinity and stiffness, but also changes the frequency response of the dynamic mechanical properties.     

Ellipsoidal neighbourhood outlier factor for distributed anomaly detection in resource constrained networks

Anomaly detection in resource constrained wireless networks is an important challenge for tasks such as intrusion detection, quality assurance and event monitoring applications. The challenge is to detect these interesting events or anomalies in a timely manner, while minimising energy consumption in the network. We propose a distributed anomaly detection architecture, which uses multiple hyperellipsoidal clusters to model the data at each sensor node, and identify global and local anomalies in the network. In particular, a novel anomaly scoring method is proposed to provide a score for each hyperellipsoidal model, based on how remote the ellipsoid is relative to their neighbours. We demonstrate using several synthetic and real datasets that our proposed scheme achieves a higher detection performance with a significant reduction in communication overhead in the network compared to centralised and existing schemes.