Low-temperature phase formation in the SrF2–LaF3 system

Phase formation in the SrF₂–LaF₃ system was studied at temperatures ranging from 300°C to 450°C using nitrate flux. The solubility of LaF₃ in SrF₂ decreases with decreasing temperature. The equilibrium width of the solid solution region Sr_1−xLa_xF_2+x at 400°C, it is 44.6 ± 0.4 mol% LaF₃ (x = 0.446), at 350°C — 38.3 ± 0.7 mol% LaF₃ (x = 0.383), and decreases almost to zero at 300°C.     

A New Research Infrastructure for Investigating Flow Hydraulics and Process Equipment at Critical Fluid Properties

An optimized equipment design for natural gas processing and liquefaction plants becomes increasingly difficult with changing process conditions: Particularly low values of surface tension create rising challenges on the design of phase separators and column internals. The TERESA test rig at HZDR was designed to allow the investigation of multiphase thermohydraulics and phase separator performance under critical fluid properties in industrial dimensions. A versatile pipe test section is available in DN200 and equipment internals may be tested in a sectional DN300/DN500 test separator. The applied test fluid shows a high vapor-liquid density difference between 1470 and 940 kg m⁻³, viscosity as low as 0.12 mm²s⁻¹, and surface tension down to 1.3 mN m⁻¹. Volumetric liquid and vapor flow rates may be varied up to 9 and 530 m³h⁻¹ in the test rig, respectively.     

Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.     

Monitoring the curing processes of epoxy oligomers with partially substituted polyethoxymetallosiloxanes by IR spectroscopy and thermomechanical analysis

In this work, the curing of «ED-20» epoxy resin with partially siloxy-substituted aluminum, iron, and zirconium siloxanes that we obtained previously was studied. The initial content of a metallosiloxane in the compositions was 5–50 wt% with respect to the resin. In all the cases, thermal curing was used to obtain a series of samples in the form of solid homogeneous materials. The fact of the epoxy ring opening in the resin was confirmed by IR spectroscopy. The catalytic properties of the metal atom in a metallosiloxane were found to affect the curing process. The samples demonstrate rather a high resistance to thermooxidative destruction, and in most cases, their glass transition temperatures are lower than those obtained upon standard curing of «ED-20» resin with triethylenetetramine. Partially siloxy-substituted metalloalkoxysiloxanes can be efficient agents for curing and formation of a hybrid material based on epoxy resins.     

Polishing and buffing: Theory and practice

There are many other aspects of buffing and polishing than these briefly discussed here. Though this very important contributor to the metal-finishing industry is still a great deal more an art than a science, basic engineering principles can be applied. With the proper melding of buff and compound, applied in a controlled fashion, optimum finish and maximum economy can be achieved.     

Knowledge and Belief: Some Clarifications

The notions of knowledge and belief play an important role in philosophy. Unfortunately, the literature is not very consistent about defining these notions. Is belief more fundamental than knowledge or is it the other way around? Many accounts rely on the widely accepted strategy of appealing to the intuition of the reader. Such an argumentative methodology is fundamentally flawed because it lets the problems of common sense reasoning in through the front door. Instead, I suggest that philosophical arguments should be based on formal-computational models to (a) reduce the ambiguities and uncertainties that come with intuitive arguments and reasoning, and (b) capture the dynamic nature of many philosophical concepts. I present a model of knowledge and belief that lends itself to being implemented on computers. Its purpose is to resolve terminological confusion in favor of a more transparent account. The position I defend is an antirealist naturalized one: knowledge is best conceived as arising from experience, and is fundamental to belief.     

“From microtiter plates to droplets” tools for micro-fluidic droplet processing

Droplet-based microfluidic allows high throughput experimentation in with low volume droplets. Essential fluidic process steps are on the one hand the proper control of the droplet composition and on the other hand the droplet processing, manipulation and storage. Beside integrated fluidic chips, standard PTFE-tubings and fluid connectors can be used in combination with appropriate pumps to realize almost all necessary fluidic processes. The segmented flow technique usually operates with droplets of about 100–500 nL volume. These droplets are embedded in an immiscible fluid and confined by channel walls. For the integration of segmented flow applications in established research workflows—which are usually base on microtiter plates—robotic interface tools for parallel/serial and serial/parallel transfer operations are necessary. Especially dose–response experiments are well suited for the segmented flow technique. We developed different transfer tools including an automated “gradient take-up tool” for the generation of segment sequences with gradually changing composition of the individual droplets. The general working principles are introduced and the fluidic characterizations are given. As exemplary application for a dose–response experiment the inhibitory effect of antibiotic tetracycline on Escherichia coli bacteria cultivated inside nanoliter droplets was investigated.     

Seniors and Information Technology in China

Technology, particularly information technology (IT), is changing rapidly and offers many advantages for users. IT has the potential to improve one’s quality of life, but only if used. Research has shown that, in most developed and developing nations, senior use of IT lags behind that of other segments of society. This “gray divide” is a concern for government, business, and others. Concern about senior adoption and use of IT has been the motivation for numerous studies and is the motivation for this study of Chinese seniors. This exploratory study examines urban Chinese seniors’ IT use, computers and mobile phones in particular, but also their attitudes and behaviors as they relate to the use of those devices. More specifically it examines several potential factors that motivate or hinder senior’s use of information technology, including self-efficacy, satisfaction, comfort with technology, and both positive and negative attitudes. This study provides some insight into the quantity and diversity of Chinese senior technology use in urban China. Particularly noteworthy, the study found that technology ownership was quite high, and in general the Chinese seniors studied had positive attitudes and beliefs concerning information technology. This is generally good news for the Chinese government, which must efficiently provide services for the growing population of Chinese seniors, as well as for businesses that wish to capitalize on one of the largest senior populations in the world.