Reaction of pyritic sulphur in coal with lime and calcined dolomite during the coking process

Various reactions occur between pyrite (FeS₂) in coal and CaO to form CaS when a finely pulverized intimate mixture of coal and CaO is coked at 900 °C in an inert atmosphere. The effectiveness of lime and calcined dolomite (CaO.MgO) in promoting this reaction has been evaluated; calcined dolomite is somewhat more effective than lime over coal/ oxide weight ratios from 2.8 to 14. The degree of conversion of pyrite to calcium sulphide at a coal/calcined dolomite weight ratio of 7 has been determined as a function of time at 900 °C; coking time in excess of 2.5 h does not have a significant effect. It has been shown that the total sulphur lost on coking coal/lime mixtures decreases and the percentage of FeS, originating from the dissociation of pyrite, converted to CaS increases as the amount of lime added increases. But although the total sulphur content of coke produced in the presence of CaO is then higher than when the coal is coked without lime, the pyritic sulphur has been converted to CaS which is more amenable to chemical conversion to H₂S. A method is outlined for determining CaS in the coked mixture in the presence of FeS.     

New inhibitors of the Tat-TAR RNA interaction found with a "fuzzy" pharmacophore model

TAR RNA is a potential target for AIDS therapy. Ligand-based virtual screening was performed to retrieve novel scaffolds for RNA-binding molecules capable of inhibiting the Tat-TAR interaction, which is essential for HIV replication. We used a "fuzzy" pharmacophore approach (SQUID) and an alignment-free pharmacophore method (CATS3D) to carry out virtual screening of a vendor database of small molecules and to perform "scaffold-hopping". A small subset of 19 candidate molecules were experimentally tested for TAR RNA binding in a fluorescence resonance energy transfer (FRET) assay. Both methods retrieved molecules that exhibited activities comparable to those of the reference molecules acetylpromazine and chlorpromazine, with the best molecule showing ten times better binding behavior (IC50 = 46 microM). The hits had molecular scaffolds different from those of the reference molecules.     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

Processing of Particle-Stabilized Wet Foams Into Porous Ceramics

Direct foaming of colloidal suspensions is a simple and versatile approach for the fabrication of macroporous ceramic materials. Wet foams produced by this method can be stabilized by long-chain surfactants or by colloidal particles. In this work, we investigate the processing of particle-stabilized wet foams into crack-free macroporous ceramics. The processing steps are discussed with particular emphasis on the consolidation and drying process of wet foams. Macroporous alumina ceramics prepared using different consolidation and drying methods are compared in terms of their final microstructure, porosity, and compressive strength. Consolidation of the wet foam by particle coagulation before drying resulted in porous alumina with a closed-cell structure, a porosity of 86.5%, an average cell size of 35 μm, and a remarkable compressive strength of 16.3 MPa. On the other hand, wet foams consolidated via gelation of the liquid within the foam lamella led to porous structures with interconnected cells in the size range from 100 to 150 μm. The tailored microstructure and high mechanical strength of the macroporous ceramics can be of interest for the manufacture of bio-scaffolds, thermal insulators, impact absorbers, separation membranes, and light weight ceramics.     

Sourcing the Arab Spring: A Case Study of Andy Carvin's Sources on Twitter During the Tunisian and Egyptian Revolutions

News sourcing practices are critical as they shape from whom journalists get their information and what information they obtain, mostly from elite sources. This study evaluates whether social media platforms expand the range of actors involved in the news through a quantitative content analysis of the sources cited by NPR's Andy Carvin on Twitter during the Arab Spring. Results show that, on balance, nonelite sources had a greater representation in the content than elite sources. Alternative actors accounted for nearly half of the messages. The study points to the innovative forms of production that can emerge with new communication technologies, with the journalist as a central node trusted to authenticate and interpret news flows on social awareness streams.     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.     

Reverse osmosis in the desalination of brackish water and sea water

To make RO an economical process, plant and operating costs have been reduced by developing compact modules, led by polyamide hollow fibre modules which recover energy from the reject when desalinating highly saline brackish water and seawater. Such plants only start to pay their way at product rates of around 400m³ /d +. Energy costs for desalination systems with lower capacities can also be reduced considerably by operating the RO plants at conversion rates of more than 30%. To what extent the required higher conversion rates can be obtained for a particular application depends on concentration of scales-forming content matter (calcium sulphate, strontium sulphate, barium sulphate and calcium carbonate), salt content of the raw water, concentration of fouling substances such as iron, manganese, anorganic and organic matter, risk of biological growth due to algae, shells and bacteria. The scope and type of conditioning and pre-treatment are based on these factors.     

Mössbauer analysis of iron phases in brown coal ash and fireside deposits

The iron phases present in an electrostatic precipitator ash, an uncooled ash deposit and a cooled superheater ash deposit from Hazelwood Power Station, Australia, burning Morwell brown coal has been examined using Mössbauer spectroscopy. The principal iron phase in the precipitator ash and the uncooled ash deposit from a hot gas offtake was calcium aluminoferrite (Ca₂Fe_{2 ? x}Al_xO₅). Minor amounts of hematite (α-Fe₂O₃) and magnetite (Fe₃O₄) were also detected in the precipitator ash. The cooled superheater ash deposit contained a (Mg, Fe, Al) oxide spinel as the primary iron phase; small quantities of hematite were also detected in this deposit close to the heat exchanger interface. The formation of these iron phases has been rationalized on the basis of the average composition of coal delivered to the power station and supplementary ash chemistry data obtained from other techniques. The evidence suggests that the calcium aluminoferrite in the precipitator ash is derived from inorganic constituents (distributed throughout the coal organic matrix) and the hematite and magnetite are of mineral origin (discrete particles).