Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Mining fleet management systems: a review of models and algorithms

The objective of this paper is to review and document the mine fleet management systems’ models and algorithms. The purpose is to understand the algorithms behind the fleet management systems and the proposed academic solutions in this area to identify any gaps in the current literature and to open up opportunities to establish research questions that need to be addressed in an integrated simulation and optimisation operational planning research framework. In this paper, we review industrial fleet management systems and the main academic algorithms behind such systems. The fleet management systems are divided into three subsequently related problems to review: shortest path, production optimisation and real-time dispatching. Finally, the limitations of current algorithms for fleet management systems are documented in terms of mining practice feasibility and optimality of the solution on large-scale problems. The results of this literature review enable us to evaluate the logical links between major components of an integrated simulation and optimisation operational planning framework with current theory of fleet management systems.     

Chromophore-Free Sealing and Repair of Soft Tissues Using Mid-Infrared Light-Activated Biosealants

Poor strength, infection, leakage, long procedure times, and inflammation limit the efficacy of common tissue sealing devices in surgeries and trauma. Light-activated sealing is attractive for tissue sealing and repair, and can be facilitated by the generation of local heat following absorption of nonionizing laser energy by chromophores. Here, the inherent ability of biomaterials is exploited to absorb nonionizing, mid-infrared (midIR) light in order to engender rapid photothermal sealing and repair of soft tissue wounds. In this approach, the biomaterial simultaneously acts as a photothermal convertor as well as a biosealant, which dispenses the need for exogeneous light-absorbing nanoparticles or dyes. Biomechanical recovery, mathematical modeling, histopathology analyses, tissue strain mapping using digital imaging correlation, and visualization of the biosealant-tissue interface using hyperspectral imaging indicate superior performance of midIR sealing in live mice compared to conventional sutures and glue. The midIR-biosealant approach demonstrates rapid sealing of soft tissues, improves cosmesis, lowers potential for scarring, obviates safety concerns because of the nonionizing light used, and allows adoption of a wide diversity of biomaterials. Taken together, the studies demonstrate a novel advance both in biomaterials for surgical sealing along with the use of nonionizing midIR light, with high potential for clinical translation.     

Improved formic acid oxidation using electrodeposited Pd–Cd electrocatalysts in sulfuric acid solution

In the present research, nanostructured Pd–Cd alloy electrocatalysts with different compositions were produced using the electrodeposition process. The morphology of the samples was studied by scanning electron microscopy analysis. Also, the elemental composition of the samples was determined by energy-dispersive X-ray spectroscopy and elemental mapping tests. Tafel polarization and electrochemical impedance spectroscopy methods were employed to determine the electrochemical corrosion properties of the synthesized samples in a solution containing 0.5 M sulfuric acid and 0.1 M formic acid. The linear sweep voltammetry, cyclic voltammetry, and chronoamperometry techniques were also employed to evaluate the electrocatalytic activity of prepared samples toward the oxidation of formic acid. In this respect, the influence of some factors such as formic acid and sulfuric acid concentrations and also potential scan rate was investigated. Compared to the pure Pd sample, the Pd–Cd samples were more reactive for the oxidation of formic acid. Besides, the sample with a lower amount of Pd (Pd_1·3Cd) demonstrated much higher electrocatalytic activity than the Pd_7·1Cd and Pd_2·1Cd samples. The observed high mass activity of 15.06 A mg^?1_Pd for the Pd_1·3Cd sample which is 21.1 times higher than Pd/C is an interesting result of this study.     

An experimental study of forced convective heat transfer for fully developed Al 2 O 3 –water nanofluid in an annulus tube

Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al₂O₃–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%.     

Mobility management architectures based on joint mobile IP and SIP protocols

In the all-IP wireless networks beyond the third generation, mobility management can be effectively achieved by applying mobile IP (MIP) and the session initiation protocol (SIP) jointly. Nevertheless, an efficient combination of both protocols remains an open research issue. Conventional hybrid MIP-SIP mobility architectures operate MIP and SIP almost independently, resulting in significant redundant costs. This article investigates the representative hybrid MIP-SIP architectures and explores the joint optimizations between MIP and SIP for a more cost-efficient mobility support whilst utilizing their complementary power. Two novel design approaches are presented. The first approach culminates in a tightly integrated architecture, which merges the redundant mobility entities in MIP and SIP to yield maximum system efficiency. The other approach leads to a loosely integrated architecture, where necessary interactions are introduced between MIP and SIP mobility servers while their physical entities are kept intact. Major mobility procedures, including location update, session setup and handoff, are discussed in these architectures. The analytical results demonstrate that both proposed architectures outperform typical hybrid MIP-SIP architectures in terms of clear-cut reduced signaling costs     

Mechanics of plain-woven fabrics for inflated structures

Pressurized fabric tubes, pressure-stabilized beams (known as air beams) and air-inflated structures are considered to be valuable technologies for lightweight, rapidly deployable structures. Design optimization of an inflated structure depends on a thorough understanding of woven fabric mechanics. In this paper the bending response of woven pressure-stabilized beams have been experimentally tested and analytically investigated. Additionally, the micromechanical effects of interacting tows have been studied through finite element models containing contact surfaces and nonlinear slip/stick conditions. Local unit cell models consisting of pairs of woven tows were created to characterize the effective constitutive relations. The material properties from the unit cell models were then used for the global continuum model subjected to 4-point flexure. An experimental set-up was designed and manufactured for testing of Vectran and PEN air beams. The air beam mid-span deflections were measured as functions of inflation pressure and bending load. Plots of the elastic and shear moduli with respect to the pressure and coefficient of friction have been generated. It was determined that the effective elastic and shear moduli were functions of inflation pressure, the material used and the geometry of the weave. It was shown that pneumatic or pressurized tube structures differ fundamentally from conventional metal structures.     

Sucralfate attenuates gastric mucosal lesions and increased vascular permeability induced by ischaemia and reperfusion in rats

Recent evidence suggests that oxygen-derived free radicals are involved in mediating gastric microvascular and parenchymal cell injuries induced by ischaemia and reperfusion. Therefore, the effect of the locally acting anti-ulcer drug, sucralfate, was studied on ischaemia and reperfusion (e.g. induced gastric lesions, intraluminal bleeding, changes in vascular permeability and non-protein sulfhydryl levels in the rat stomach). Allopurinol was used as a known standard antioxidant drug. Rats were subjected to 30 min of gastric ischaemia in the presence of 100 mmol/L hydrochloric acid and reperfusion periods of 15, 30 or 60 min duration. The gastric lesions were assessed microscopically under an inverted microscope. The vascular permeability was quantified by measuring the extravasated Evans blue in the stomach. There were significantly greater numbers of gastric lesions, intraluminal bleeding and leakage of Evans blue during all reperfusion periods as compared with those of ischaemia, with maximum effects occurring at 60 min following reperfusion. Pretreatment with sucralfate (31.25-250 mg/kg, p.o.) or allopurinol (12.5-50 mg/kg, i.p.) 30 min before the procedure, dose-dependently reduced the gastric lesions, intraluminal bleeding, and decreased the vascular permeability induced by ischaemia and reperfusion. Furthermore, sucralfate dose-dependently reverses the ischaemia and reperfusion-induced depletion of mucosal non-protein sulfhydryl levels and inhibited the superoxide radical production in both cell-free xanthine-xanthine oxidase and in the stimulated polymorphonuclear cellular systems. These results suggest that the protection produced by sucralfate against gastric injury may be due to its antioxidant effects.     

Hemodynamic effects of spinal anesthesia in the elderly: single dose versus titration through a catheter

Protective immunity against infection with Mycobacterium tuberculosis is imparted by T cells rather than antibodies, but B cells can play a role as antigen-presenting cells and in granuloma formation. We re-evaluated the role of B cells in the course of tuberculous infection in mu-chain knock-out (Ig-) mice. Surprisingly, the organs of M. tuberculosis-infected Ig- mice were found to have three- to eight-fold elevated counts of viable bacilli compared with normal littermates at 3-6 weeks post-infection. Splenic interferon-gamma responses to whole antigen were unimpaired, whilst proliferation to certain mycobacterial peptides was found to be diminished. However, bacille Calmette-Guérin (BCG) vaccination significantly reduced the infection in Ig- mice. The mechanisms by which B cells can influence primary tuberculous infection need further study.