Asymptotic Properties of a Probabilistic‐Statistical Model of Particle Classification in Hydrocyclones

The peculiarities of practical implementation of a probabilistic‐statistical model for a hydrodynamic stage of particle classification process of liquid‐solid polydisperse systems in cylinder‐conic hydrocyclones of small size have been investigated. Within reasonable assumptions, stationary solutions of the Fokker‐Planck‐Kolmogorov kinetic equation were obtained for the considered separation process. In order to describe changes in characteristics of suspension separation in hydrocyclones it was proposed to use stationary distributions, which parameters depend not only on hydraulic and dynamic features of flows inside an apparatus, but also are determined by relative magnitudes of the impact of particle classification and centrifugal forces in comparison with the intensity of random perturbations.     

Electrochemical study on new polymer composite for zinc corrosion protection

Galvanostatic electrodeposition mode was employed for the synthesis of new polyaniline and polypyrrole-based composite coatings (PANI/PPY) onto pure zinc electrode. Potentiodynamic polarization, open circuit potential measurements and Electrochemical Impedance Spectroscopy (EIS) were employed to assess the ability of these composite coatings to provide an effective barrier to corrosion in chloride environment. Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) observations were employed to characterize the structure and morphology of the modified electrodes. The coatings deposited galvanostatically at lower current density showed the best quality in terms of protection ability towards aggressive medium. It was found that the new PANI/PPY composite coatings had significantly better properties than single polymer coatings regarding the corrosion protection.     

The influence of third-body particles on wear rate in unicondylar knee arthroplasty: a wear simulator study with bone and cement debris

The reduced intraoperative visibility of minimally invasive implanted unicondylar knee arthroplasty makes it difficult to remove bone and cement debris, which have been reported on the surface of damaged and retrieved bearings. Therefore, the aim of this study was to analyze the influence of bone and cement particles on the wear rate of unicompartmental knee prostheses in vitro. Fixed bearing unicompartmental knee prostheses were tested using a knee-wear-simulator according to the ISO standard 14243-1:2002(E) for 5.0 million cycles. Afterwards bone debris (particle size 671 ± 262 μm) were added to the test fluid in a concentration of 5 g/l for 1.5 million cycles, followed by 1.5 million cycles blended with cement debris (particle size 644 ± 186 μm) in the same concentration. Wear rate, knee-kinematics and wear-pattern were analyzed. The wear rate reached 12.5 ± 1.0 mm³/million cycles in the running-in and decreased during the steady state phase to 4.4 ± 0.91 mm³/million cycles. Bone particles resulted in a wear rate of 3.0 ± 1.27 mm³/million cycles with no influence on the wear rate compared to the steady state phase. Cement particles, however, lead to a significantly higher wear rate (25.0 ± 16.93 mm³/million cycles) compared to the steady state phase. The careful removal of extruded cement debris during implantation may help in reducing wear rate. Bone debris are suggested to have less critical influence on the prostheses wear rate.     

Paper‐Derived Bioactive Glass Tape

Porous bioactive glass (BaG) structures were manufactured applying novel preceramic paper process. Preceramic papers were produced for aqueous suspensions loaded with different contents of pulp fiber and BaG filler. Pressure loading was applied in order to increase the packing density in the paper sheets. The paper sheets were sintered at 630 °C for 1 h. The porous glass–ceramic specimens were characterized for density, porosity, composition, microstructure, and mechanical properties. A pronounced volumetric shrinkage was observed, but no surface flaws or inhomogeneous areas were detected. The mechanical strength using the ball on three balls test and elastic modulus of sintered specimens vary between 21 and 33 MPa and 0.30–0.85 GPa, respectively.     

On application of input data partitioning to Bayesian weighted averaging of biomedical signals

Averaging in the time domain may be used for noise attenuation in case of biomedical signals with a quasi‐cyclical character. Traditional arithmetic averaging technique assumes the constancy of the noise power cycle‐wise, however, most types of noise are not stationary and the variability of noise power is observed. It constitutes a motivation for using methods of weighted averaging, in particular Bayesian weighted averaging. This paper presents the computational study of Bayesian weighted averaging with traditional (sharp) and fuzzy partition of the input data in the presence of non‐stationary noise. There is presented the known empirical Bayesian weighted averaging method (EBWA), with the parameter p describing the probabilistic model, and its modification NBWA which eliminates the parameter. Both methods can be extended by partitioning of the input data. The performance of presented methods is experimentally evaluated for an analytical signal as well as a real ECG signal and compared with traditional arithmetic averaging method. However, the methods can be applied to any signal with a quasi‐cyclical character. The aim of the paper is to show the influence of the type of partition as well as the number of parts on the quality of the averaged signal.     

Imaging of Extracellular pH Using Hyperpolarized Molecules

Many diseases can overrule natural pH regulatory mechanisms and alter the extracellular pH (pH_e). A non-invasive method that resolves pH_e in vivo with high spatial and temporal resolution could therefore improve diagnosis and monitoring of diseases, contributing to the concept of precision medicine. During the last decades, several techniques have been proposed to image pH_e non-invasively. The majority of these methods rely on magnetic resonance because of its good spatial resolution, high penetration depth, non-ionizing radiation and excellent complimentary soft tissue contrast. Dissolution dynamic nuclear polarization (DNP) is an emerging concept to enhance nuclear magnetic resonance (NMR) signals by more than four orders of magnitude, making it possible to observe in vivo metabolic processes in real-time. Here, we summarize and review recent developments in pH_e imaging techniques based on hyperpolarization methods and give an overview of recently discovered hyperpolarized pH sensor molecules that have been applied in vitro and in vivo.     

Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I

Synthetic patch materials currently in use have major limitations, such as high susceptibility to infections and lack of contractility. Biological grafts are a novel approach to overcome these limitations, but do not always offer sufficient mechanical durability in early stages after implantation. Therefore, a stabilising structure based on resorbable magnesium alloys could support the biological graft until its physiologic remodelling. To prevent early breakage in vivo due to stress of non-determined forming, these scaffolds should be preformed according to the geometry of the targeted myocardial region. Thus, the left ventricular geometry of 28 patients was assessed via standard cardiac magnetic resonance imaging (MRI). The resulting data served as a basis for a finite element simulation (FEM). Calculated stresses and strains of flat and preformed scaffolds were evaluated. Afterwards, the structures were manufactured by abrasive waterjet cutting and preformed according to the MRI data. Finally, the mechanical durability of the preformed and flat structures was compared in an in vitro test rig. The FEM predicted higher durability of the preformed scaffolds, which was proven in the in vitro test. In conclusion, preformed scaffolds provide extended durability and will facilitate more widespread use of regenerative biological grafts for surgical left ventricular reconstruction.     

Neural approach for temperature‐dependent modeling of GaN HEMTs

Gallium nitride high electron‐mobility transistors have gained much interest for high‐power and high‐temperature applications at high frequencies. Therefore, there is a need to have the dependence on the temperature included in their models. To meet this challenge, the present study presents a neural approach for extracting a multi‐bias model of a gallium nitride high electron‐mobility transistors including the dependence on the ambient temperature. Accuracy of the developed model is verified by comparing modeling results with measurements. Copyright © 2014 John Wiley & Sons, Ltd.     

Pullulan: A versatile coating agent for superparamagnetic iron oxide nanoparticles

Ultrasmall superparamagnetic iron oxide (Fe₃O₄) nanoparticles coated by biocompatible pullulan (Pu‐USPIO) with sizes below 10 nm and having a magnetite core and a hydrophilic outer shell of pullulan were prepared. The formed Pu‐USPIOs were thoroughly characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, atomic force microscopy, and small‐angle X‐ray scattering experiments. The content of magnetic nanoparticles embedded into the pullulan matrix was determined by thermogravimetric analysis. Vibrating sample magnetometry analysis was used to evaluate the magnetic properties of the Pu‐USPIO samples. Because of the presence of pullulan, these nanoparticles could be conditioned in many versatile forms, from a clear solution to magnetic films, for potential applications, including magnetic hyperthermia mediators. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42926.