Colour and ergonomics: On the selection of a “colour of the year”

The key role of colour in ergonomics has been emphasized by a number of researchers and design professionals. Although several research studies have been published regarding the use of colour in ergonomics, there are still some areas that need to be considered. The issue of deciding a “colour of the year” is an example, which represents a new challenge for researchers in the field of ergonomics. This is of particular interest considering the fact that the nature of research on the selection of a “colour of the year” is generally based on user experience. This paper argues that ergonomics should play a more prominent role in this field to ensure better user experience and performance. This paper highlights specific areas that need further study and development.     

Study on the structure and properties of nanocomposites based on high-density polyethylene/starch blends

The effects of nanoclay on the structure and final properties of high density polyethylene (HDPE)/thermoplastic starch (TPS) blends were investigated. Neat blends as well as nanoclay containing samples were prepared by melt blending in an internal mixer. Also, a poly (ethylene-g-maleic anhydride) (PE-g-MA) copolymer was used as compatibilizer in some of the formulations. Nanocomposites with intercalated structures were obtained in the samples lacking the compatibilizer, based on the rheological, X-ray diffraction (XRD) and transmission electron microscopy (TEM) results. However, some of the silicate layers were nearly exfoliated in the presence of the compatibilizer. The nanoclay was located preferably in the HDPE matrix as well as at the interface of the HDPE matrix and TPS dispersed phase. The ability of the nanoclays in decreasing the average size of TPS phase in the HDPE matrix was confirmed by scanning electron microscopy (SEM) observations. Furthermore, thermo-gravimetric analysis (TGA) showed that the nanoclays could enhance the thermal stability of the samples. It seems that nanoclays performed as an insulator and mass transport barrier to the small molecules generated during decomposition, and assisted in the formation of char after thermal decomposition of the polymer matrix. All the samples containing the compatibilizer possessed higher tensile strength and elongation at break, but lower modulus, compared to the corresponding un-compatibilized samples. Finally, incorporation of the nanoclays was found to be in favor of developing nanocomposites with higher biodegradability as evidenced through a biodegradation test by fungi as well as water uptake experiments.     

Investigation on the correlation between rheology and morphology of PA6/ABS blends using ethylene acrylate terpolymer as compatibilizer

Phase morphology and rheological behavior of polyamide 6 (PA6)/acrylonitrile butadiene styrene (ABS) polymers blends was studied using scanning electron microscopy and rheometry. The results showed that the phase morphology and rheological properties depends on blend composition. We evaluated the effect of addition of ABS as dispersed phase and EnBACO‐MAH (ethylene n‐butyl acrylate carbon monoxide maleic anhydride) as a compatibilizer on the morphological and rheological behaviors of PA6/ABS blends. It was concluded that there is a good agreement between the results obtained from rheological and morphological studies. As a consequence, addition of the ABS and compatibilizer weight percent led to a significant change in morphological structure and a great mounting in the viscosity as well as the elasticity. The rheological properties results demonstrate that adding compatibilizer to polymer blends led to increasing the crossover point, which shows a transition from a high viscous to a considerably more elastic behavior. Also, the slow transition of relaxation time peak from the peak of the PA6 to the peak of the ABS implies increasing the miscibility of the PA6/ABS blend components by increasing compatibilizer content. In addition, the Carreau–Yasuda model was used to extract information on rheological properties (zero shear viscosity and relaxation time) for PA6/ABS/EnBACO‐MAH blends by fitting the experimental data with this model. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Relationship between droplet size and fluid flow characteristics in miniemulsion polymerization of methyl methacrylate

Static mixer (SM) can be applied for emulsification, but the fundamental understanding of the nature of fluid flow and mixing in static mixers, is however poor. Droplet size is a very important parameter in miniemulsion systems and affects strongly the mechanism of particle formation in polymerization reactions. In this study, static mixer was used as homogenization device for emulsification of methyl methacrylate (MMA). Re number (Re) was obtained for SM inserted tube in different flow rates. It was demonstrated the nature of fluid flow was turbulent under our experimental conditions. The relationship between droplet size—the most important variable in our study—and Weber number (We) was investigated. The results showed that the ratio of the droplet size to the pipe diameter was fit as an exponential function with an order of −0.35. The polymerization of created droplets under certain We values by SM showed that it is possible to obtain a reasonable 1 : 1 copy of droplets to the particles. All these, indicate that using relationship between We and droplet size allow one to obtain acceptable condition of droplet nucleation in miniemulsion polymerization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Electrophoretic deposition of titanium nitride coatings

Electrophoretic deposition of the titanium nitride (TiN) coatings from suspensions prepared by dispersion of TiN particles in triethanolamine (TEA) containing butanol medium was studied. Effects of the TiN particles concentration (C_TiN) on the weight of the deposited coatings, triethanolamine concentration (C_TEA=0.25, 0.5, 0.75, and 1 mL/L) on the Zeta potential of the TiN particles, suspension electrical conductivity and pH, as well as effects of the deposition voltage (V_d=60, 90, and 120 V) and time (t_d =1, 2, and 3 minutes) on the microstructure and thickness of the deposited coatings were investigated. Variations in deposition current density, effective deposition voltage, electrical resistance, and deposited coating weight versus deposition time were recorded. The morphology of the as‐dried coatings was studied using Scanning Electron Microscope (SEM). The results indicated that by increasing the C_TiN the weight of deposits increases linearly up to 40 g/L. For suspensions containing C_TiN=40 g/L, the optimum C_TEA is obtained to be 0.5 mL/L leading to Zeta potential of 43.25 mV. Uniform and crack‐free as‐dried coatings obtained at V_d and t_d of 90 V and 2 minutes, respectively.     

Morphological evolution on the surface of hydrothermally synthesized hydroxyapatite microspheres in the presence of EDTMP

Well-ordered and surface engineered hierarchical hydroxyapatite microspheres (HAM) were prepared via a template free hydrothermal process. Ethylene diamine tetra (methylene phosphonic acid) (EDTMP) was used as chelating or regulating agent for the first time in this study. The results indicated the formation of sheet-like particles in the absence of EDTMP. On the other hand, microspheres with radially grown nanorods (HAMNR) or nanosheets (HAMNS) on the surface were obtained (with average diameter of 5?µm) in the presence of EDTMP. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy were used to characterize the crystalline phases in the synthesized samples. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that EDTMP concentration played an important part in regulating the morphology to form well organized microspheres with nanosheets or nanorods on the surface. Brunauer-Emmett-Teller (BET) revealed an increase in the specific surface area with the change in morphology from the HAMNS to HAMNR. Possible mechanisms are proposed to account for the formation of different morphologies based upon thermodynamic and kinetic theories.     

Controlled release of fluorouracil (5-FU) from chitosan-co-poly(ethylene glycol)/ poly(glycerol sebacate)-co-poly(ethylene glycol)-coated iron oxide

A blend of polyglycerol sebacate-poly ethylene glygol/chitosan-poly ethylene glycol-coated iron oxide (PGS-PEG/CS-PEG@Fe₃O₄) nanoparticles for 5FU delivery was prepared by reverse ultrasonic emulsification method. To enhance polymers’ solubility, PEG was grafted. Chemical characterization was performed through Fourier transformed infrared and proton nuclear magnetic resonance spectra. In vitro assay revealed that release profile of 5FU-loaded PGS-PEG/CS-PEG@Fe₃O₄ is sustained. Moreover, cytotoxicity was analyzed on HT29 cell line at the presence of external magnetic field using the lactate dehydrogenase and Alamar Blue. Results illustrate that (PGS-PEG/CS-PEG@Fe₃O₄) is promising to use as a carrier for 5FU anticancer agent with sustained tailored release.     

Effects of nanoclay and coupling agent on the physico‐mechanical,morphological, and thermal properties of wood flour/polypropylene composites

This article presents the effects of coupling agent and nanoclay (NC) on some properties of wood flour/polypropylene composites. The composites with different NC and maleic anhydride grafted polypropylene (MAPP) contents were fabricated by melt compounding in a twin‐screw extruder and then by injection molding. The mass ratio of the wood flour to polymer was 40/60 (w/w). Results showed that applying MAPP on the surface of the wood flour can promote filler polymer interaction, which, in turn, would improve mechanical properties of the composite as well as its water uptake and thermal stability. Composite voids and the lumens of the fibers were filled with NC, which prevented the penetration of water by the capillary action into the deeper parts of composite. Therefore, the water absorption in composites fabricated using NC was significantly reduced. Scanning electron microscopy has shown that the treatment of composites with 5 wt% MAPP, promotes better fiber–matrix interaction, resulting in a few numbers of pull‐out traces. In all cases, the degradation temperatures shifted to higher values after using MAPP. The largest improvement on the thermal stability of composites was achieved when NC was added. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications

A hydroxyapatite (HA) particulate reinforced ultrahigh molecular weight polyethylene (UHMWPE) nanocomposite is fabricated by internal mixer at 180°C and using of paraffin oil as a processing aid to overcome the high viscosity of melted UHMWPE. The reinforcing effects of nano‐HA are investigated on nanomechanical properties of HA/UHMWPE nanocomposites by nanoindentation and nanoscratching methods. Results show that the nanocomposite with 50 wt % nano‐HA exhibits a Young's modulus and hardness of 362.5% and 200% higher, and a friction coefficient of 38.86% lower than that of pure UHMWPE, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42052.