Double‐frequency buck converter as a candidate topology for integrated envelope elimination and restoration applications in power supply of RFPAs

This paper proposes the use of double‐frequency (DF) buck converter architecture consisting of a merged structure of high and low frequency buck cells as a candidate topology for envelope elimination and restoration (EER) applications and integrated power supply of RF power amplifiers (RFPA) to obtain favorable tradeoffs in terms of efficiency, switching ripple, bandwidth, and tracking capability. It is shown that having two degrees of freedom in designing the DF buck helps to achieve high efficiency, low output ripples, and tracking capability with low ripples, simultaneously. A comparison analysis is done with regards to the mentioned performance indexes with the standard and three‐level buck converters; in addition, the results are validated in HSPICE in BSIM3V3 0.35‐µm CMOS process. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of Fuzzy c-means algorithm for the estimation of Asphaltene precipitation

One of problematic topics in petroleum engineering is Asphaltene precipitation issue which causes problems such as tubing plugging and formation damage due to temperature, pressure and composition changes so the notability of this issue increases. In the present investigation a novel Fuzzy c-means (FCM) algorithm was developed to predict precipitated asphaltene as function of dilution ratio, carbon number of precipitants and temperature for solving the problem. The results showed that this novel approach has great ability to predict precipitated asphaltene in terms of aforementioned parameters. The coefficients of determination (R²) for training and testing steps are calculated as 0.9828 and 0.9387 respectively. This great degree of accuracy expresses that the predicting algorithm has potential to be utilized as software for prediction of asphaltene behavior.     

Effect of Iron sulfate as electrolyte additive on plasma electrolytic oxidation of aluminum alloy

This study has been carried out to investigate the incorporation of Iron(II) sulfate as an additive of electrolyte on formed AA1010 aluminum alloy, using plasma electrolytic oxidation method in silicate-based electrolytes containing Iron(II) sulfate. In order to fabricate nanocomposite coating, silicon nitride nanopowder was added to electrolyte. The effects of iron(II) sulfate additive on the voltage-time trend, microstructure, compositions, wear, and corrosion resistances of PEO coatings were investigated. In addition, current density and concentration of additive were studied as parameters that were effective on coating. Results showed that although FeSO₄ enters to the coating structure, but it does not develop a new phase. The corrosion and wear behavior of coated samples with FeSO₄ indicate an improvement as compared to those without additive.     

High Gain Modified Dual-Band and Dual-Circularly Polarized Array Antenna

Wireless Personal Communications - A novel design of double-layer dual-band circularly polarized array antennas (DDCPAAs) is presented in this paper. First, a DDCP single antenna is introduced as...     

Dynamic modeling and CPG-based trajectory generation for a masticatory rehab robot

Human mastication is a complex and rhythmic biomechanical process which is regulated by a brain stem central pattern generator (CPG). Masticatory patterns, frequency and amplitude of mastication are different from person to person and significantly depend on food properties. The central nervous system controls the activity of muscles to produce smooth transitions between different movements. Therefore, to rehab human mandibular system, there is a real need to use the concept of CPG for development of a new methodology in jaw exercises and to help jaw movements recovery. This paper proposes a novel method for real-time trajectory generation of a mastication rehab robot. The proposed method combines several methods and concepts including kinematics, dynamics, trajectory generation and CPG. The purpose of this article is to provide a methodology to enable physiotherapists to perform the human jaw rehabilitation. In this paper, the robotic setup includes two Gough–Stewart platforms. The first platform is used as the rehab robot, while the second one is used to model the human jaw system. Once the modeling is completed, the second robot will be replaced by an actual patient for the selected physiotherapy. Gibbs–Appell’s formulation is used to obtain the dynamics equations of the rehab robot. Then, a method based on the Fourier series is employed to tune parameters of the CPG. It is shown that changes in leg lengths, due to the online changes of the mastication parameters, occur in a smooth and continuous manner. The key feature of the proposed method, when applied to human mastication, is its ability to adapt to the environment and change the chewing pattern in real-time parameters, such as amplitudes as well as jaw movements velocity during mastication.     

Fabrication and characterization of highly efficient three component CuBTC/graphene oxide/PSF membrane for gas separation application

Metal organic frameworks (MOFs) with marvelous properties have aroused enormous attention for different application especially gas adsorption and separation. In this regard, fabrication of MOF hybrids with carbon based materials is new strategy to upgrade MOF performance. In this study CuBTC (Copper benzene-1,3,5-tricarboxylic acid)/graphene oxide (GO) composite was synthesized and characterized by BET, SEM, TGA, XRD and FT-IR techniques. Then CuBTC and CuBTC/GO composite were incorporated into polysulfone (PSF) polymer to construct mixed matrix membranes (MMMs). The obtained membranes were characterized by SEM, TGA, XRD and tensile tests and their gas permeability was measured. The results were compared to those of CuBTC/PSF MMMs. It was revealed that CuBTC/GO composite as filler showed superior performance relative to CuBTC. For instance, 15 wt% loading of CuBTC/GO in PSF represented outstanding gas separation behavior while the same loading of CuBTC in PSF deteriorated performance of MMM. Well particle dispersion and favorable polymer-filler interaction were responsible for such observed difference. A high H₂/CH₄ and H₂/N₂ selectivity of 80.03 and 70.46 were recorded for CuBTC/GO in PSF (15 wt%) compared to 44.56 and 40.92 for CuBTC in PSF (15 wt%).     

On the dynamical thermoelasticity problem for a hollow funtionally graded cylinder

A thermoelasticity problem of a pressurized infinite cylinder made of functionally graded material is solved analytically where material properties vary with radial position. Time dependent thermal and mechanical boundary conditions are assumed to act on the inner and outer surfaces of the cylinder. For thermal boundary conditions, temperature is prescribed on both surfaces, whereas for mechanical boundary conditions, tractions are prescribed on the boundaries. Obtaining distribution of temperature throughout the cylinder, the dynamical structural problem is solved and closed form relations are extracted for distributions of stress components.